Zavedení
Thank you for choosing the Dangbei Gimbal Projector Stand. This stand is designed to provide a stable and adjustable platform for your projector, enhancing your viewing experience. Constructed from high-quality aluminum alloy, it offers durability and supports devices up to 11 lbs (5 kg). This manual provides essential information for proper setup, operation, and maintenance of your projector stand.
Důležité bezpečnostní informace
- Ujistěte se, že stojan je umístěn na stabilním a rovném povrchu, aby se zabránilo převrácení.
- Do not exceed the maximum supported weight of 11 lbs (5 kg).
- Keep the stand away from water or excessive moisture.
- Neumisťujte stojan na přímé sluneční světlo nebo do blízkosti zdrojů tepla.
- Do not attempt to disassemble or modify the stand, as this may void the warranty and cause damage.
- Uchovávejte mimo dosah dětí a domácích zvířat.
Obsah balení
Zkontrolujte prosím balení, zda neobsahuje následující položky:
- Dangbei Gimbal Projector Stand (Main Unit)
- Uživatelská příručka (tento dokument)
- Note: Projector not included.
Pokyny pro nastavení
The Dangbei Gimbal Projector Stand features a quick 2-step assembly process.
- Vybalte stojan: Opatrně vyjměte všechny součásti z obalu.
- Attach Projector: Align the standard 1/4" screw on the stand with the mounting hole on your projector (or compatible device). Rotate the projector clockwise until it is securely fastened to the stand. Ensure the connection is firm but do not overtighten.
Image: The Dangbei Gimbal Projector Stand with a projector securely mounted, illustrating the assembled unit. The stand features a sturdy base and two supporting arms, holding the projector at an angle.
Návod k obsluze
The Dangbei Gimbal Projector Stand allows for flexible positioning of your projector.
- Umístění: Position the stand on a flat, stable surface where you intend to project.
- Nastavení sklonu: The stand features an adjustable tilt range exceeding 180 degrees. Gently hold your projector and adjust its angle to achieve the desired projection position, including ceiling projection. The gimbal mechanism will hold the projector in place once adjusted.
- Kompatibilita: The standard 1/4" screw makes this stand compatible with Dangbei DBOX02, DBOX01, DBX3 Pro projectors, as well as other projectors, cameras, and lights that feature a compatible mounting thread.
Údržba
- Čištění: Wipe the stand with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Skladování: When not in use, store the stand in a cool, dry place away from direct sunlight.
- Inspekce: Periodically check all connections and components for any signs of wear or damage.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Stojan je nestabilní. | Uneven surface; projector weight exceeds limit; projector not securely attached. | Place on a flat, stable surface. Ensure projector weight is within 11 lbs (5 kg). Tighten the 1/4" screw securely. |
| Projector angle does not hold. | Projector is too heavy; gimbal mechanism may be worn or damaged. | Verify projector weight is within specifications. If the issue persists and the projector is within weight limits, contact customer support. |
| Stand appears damaged. | Physical impact; manufacturing defect. | Discontinue use. Contact customer support for assistance. |
Specifikace
- Rozměry (L * W * H): 278 x 217 x 197 mm (přibližně 10.94 x 8.54 x 7.76 palce)
- Čistá hmotnost: 4.4 lb (2 kg)
- Maximální podporovaná hmotnost: 11 lb (5 kg)
- Materiál: Vysoce kvalitní hliníková slitina
- Montážní šroub: Standardní 1/4"
- Nastavitelný sklon: Překračuje 180 stupňů
- Kompatibilní zařízení: Dangbei DBOX02, DBOX01, DBX3 Pro Projectors, and other devices with a 1/4" mounting thread.
Záruka a podpora
For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official Dangbei website. You may also contact Dangbei customer service directly for assistance with product issues or inquiries.
Webmísto: www.dangbei.com
E-mail: podpora@dangbei.com