Teglu FHC-2000A Paraffin Wax Warmer Instruction Manual

Zavedení

Thank you for choosing the Teglu FHC-2000A Paraffin Wax Warmer. This device is designed to provide a soothing and moisturizing paraffin wax treatment for your hands and feet. Please read this manual thoroughly before initial use to ensure safe operation and optimal performance. Keep this manual for future reference.

Důležité bezpečnostní informace

VAROVÁNÍ: Nedodržení těchto bezpečnostních pokynů může vést k úrazu elektrickým proudem, požáru nebo vážnému zranění.

• Always unplug the device from the power outlet immediately after use and before cleaning.
• Nepoužívejte tento spotřebič v blízkosti vody, například ve vaně, sprše nebo umyvadle.
• Nikdy nesahejte po přístroji, který spadl do vody. Ihned jej odpojte.
• Nepoužívejte zařízení, pokud má poškozený kabel nebo zástrčku, pokud nefunguje správně nebo pokud upadlo či bylo poškozeno.
• Udržujte kabel mimo horké povrchy.
• Nikdy neupouštějte ani nevkládejte žádné předměty do žádného otvoru.
• Nepoužívejte venku nebo nepracujte tam, kde se používají aerosolové (sprejové) produkty nebo kde je podáván kyslík.
• The wax can reach high temperatures. Always test the wax temperature on a small area of your skin (e.g., wrist) before immersing hands or feet to prevent burns. The recommended comfortable temperature for skin contact is around 50-55°C (122-131°F).
• Do not use on irritated, sunburned, broken, or sensitive skin. Consult a physician if you have any skin conditions or circulatory problems.
• Uchovávejte mimo dosah dětí. Tento spotřebič není určen k používání osobami se sníženými fyzickými, smyslovými nebo duševními schopnostmi nebo bez dostatečných zkušeností a znalostí, pokud nejsou pod dohledem nebo jim nebyly poskytnuty pokyny.
• Use only paraffin wax specifically designed for paraffin baths. Do not use other types of wax or substances.
• Ensure the device is placed on a stable, heat-resistant surface during operation.
• Nezakrývejte zařízení, když je v provozu.

Obsah balení

Po otevření zkontrolujte obsah balení, abyste se ujistili, že jsou přítomny všechny položky:

• 1x Teglu FHC-2000A Paraffin Wax Warmer (2L capacity)
• 3x 200g Paraffin Wax Packs
• 100x Plastic Hand Gloves
• 100x Plastic Foot Gloves
• 2x Thermal Gloves (for hands)
• 1x Silicone Brush (for cleaning)

Konec produktuview

The Teglu FHC-2000A features a compact design with intuitive controls for temperature and timer settings.

Pokyny pro nastavení

1. Rozbalit: Carefully remove the paraffin wax warmer and all accessories from the packaging.
2. Umístění: Place the warmer on a flat, stable, and heat-resistant surface. Ensure there is adequate ventilation around the device.
3. Vložte vosk: Open the lid and place the paraffin wax packs directly into the inner pot of the warmer. The 2L capacity can accommodate approximately 2-3 packs of 200g wax.
4. Připojte napájení: Zapojte napájecí kabel do standardní elektrické zásuvky.

Návod k obsluze

1. Melting the Paraffin Wax

1. Zapnutí: Press the "ON" button to turn on the device.
2. Nastavit teplotu: Use the "+" or "-" buttons to set the desired melting temperature. For rapid melting, set the temperature to a higher value, up to 80°C. The 150W heating element can melt 2 packs of wax in approximately 30 minutes.
3. Monitor Melting: Allow the wax to melt completely. The device will maintain the set temperature.
4. Adjust for Use: Once the wax is fully melted, lower the temperature setting to a comfortable and safe range for skin application, typically between 50°C and 55°C. Wait approximately 10 minutes for the wax to cool to this temperature.
5. Testovací teplota: Before immersing your hand or foot, carefully dip a finger into the wax to test the temperature. It should feel warm and comfortable, not hot.

2. Applying the Paraffin Wax Treatment

1. Příprava pokožky: Ensure your hands or feet are clean and dry.
2. Dip: Slowly dip your hand or foot into the melted paraffin wax, ensuring full coverage. Immediately withdraw.
3. Opakovat: Wait a few seconds for the wax to solidify slightly, then repeat the dipping process 3-5 times to build up a thick layer of wax.
4. Pokrýt: Immediately after the final dip, place a plastic glove (provided) over the waxed hand or foot. For enhanced heat retention, then place a thermal glove (provided for hands) or a towel over the plastic glove.
5. Relaxovat: Allow the wax to remain on your skin for 10-15 minutes. This allows the heat to penetrate and moisturize the skin.
6. Odstranění vosku: After 10-15 minutes, remove the thermal glove and plastic glove. The wax should peel off easily with the plastic glove. Discard the used wax. Do not reuse wax that has been in contact with skin.
7. Zvlhčovat: Gently massage any remaining oils into your skin. Your skin should feel soft and moisturized.

3. Timer Reservation Mode

The device features a timer function to pre-set the heating time.

• Press the "ON" button.
• Press the timer button (often indicated by a clock icon or separate mode button) to enter reservation mode.
• Use the "+" or "-" buttons to set the desired delay time from 2 to 99 hours. The device will begin heating after the set time has elapsed.
• Pozor: Due to the long duration options, ensure the device is placed safely and away from flammable materials if using the timer function for extended periods.

Údržba

Cleaning the Wax Warmer

1. Odpojit: Před čištěním vždy odpojte zařízení ze zásuvky a nechte jej zcela vychladnout.
2. Remove Excess Wax: If there is unmelted wax remaining, reheat the machine briefly to soften the wax. Once slightly melted, turn off and unplug the device. Carefully remove any large pieces of wax.
3. Otřít: Use the provided silicone brush or a soft, damp cloth to wipe the interior of the pot. Do not use abrasive cleaners or harsh chemicals.
4. Schnout: Ensure the pot is completely dry before storing or next use.
5. Vnější: Otřete vnější část zařízení měkkým, damp tkanina.

Poznámka: No special cleaning liquid is required. Do not immerse the device in water.

Odstraňování problémů

Specifikace

Záruka a podpora

This Teglu FHC-2000A Paraffin Wax Warmer comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, including the warranty period and coverage details.

For technical support, troubleshooting assistance, or warranty claims, please contact Teglu customer service through the retailer where you purchased the product or visit the official Teglu webstránky pro kontaktní informace.

Please have your model number (FHC-2000A) and purchase date ready when contacting support.