LPHUMEX 788a7285-0b86-491d-9c7e-d3e3db03e314
LPHUMEX Universal Ceiling Fan Remote Control Kit
Model: 788a7285-0b86-491d-9c7e-d3e3db03e314
Zavedení
This manual provides comprehensive instructions for the installation, operation, and maintenance of your LPHUMEX Universal Ceiling Fan Remote Control Kit. This kit is designed to add remote control functionality to most AC motor ceiling fans, allowing you to control fan speed, light, and set timers conveniently.
Important Safety Information: Always disconnect power to the ceiling fan at the circuit breaker before attempting any installation or maintenance. If you are unsure about electrical wiring, consult a qualified electrician.
Co je v krabici?
Your LPHUMEX Universal Ceiling Fan Remote Control Kit includes the following components:
- 2 x Fan Remotes
- 2 x Small Size Receivers
- Drátěné matice
- Montážní šrouby
- Wall Remote Holder

Image: The complete kit contents, including two white remote controls, two black receiver units, orange wire nuts, and small mounting screws.
Nastavení a instalace
Rozměry přijímače
The LPHUMEX receiver is designed with a smaller profile to fit more easily into various ceiling fan canopies. Before installation, it is recommended to check the available space in your fan's canopy against the receiver dimensions.

Image: A visual comparison illustrating the compact size of the LPHUMEX receiver (3.0in x 2.1in x 1in) compared to a standard receiver (4.5in x 2.1in x 1in), highlighting its suitability for smaller spaces.
Průvodce připojením kabeláže
Follow these steps carefully to install the receiver unit into your ceiling fan:
- Odpojit napájení: Ensure power to the ceiling fan is turned off at the circuit breaker before beginning.
- Identifikace vodičů: Locate the main power wires (AC Neutral Line, AC Live Line) and the fan/light wires from your ceiling fan.
- Připojení vstupních vodičů: Connect the receiver's input wires to the main power supply. Typically, the white wire from the receiver connects to the AC Neutral Line (usually white), and the black wire from the receiver connects to the AC Live Line (usually black).
- Připojení výstupních vodičů: Connect the receiver's output wires to your ceiling fan. The black wire from the receiver connects to the fan's live wire, and the blue wire from the receiver connects to the light's live wire. The neutral wire from the fan/light connects to the neutral wire from the main power supply.
- Zabezpečená připojení: Use the provided wire nuts to secure all connections firmly.
- Přijímač pozice: Carefully tuck the receiver into the ceiling fan canopy, ensuring no wires are pinched.
- Obnovit napájení: Once all connections are secure and the receiver is safely housed, restore power at the circuit breaker.

Image: A detailed wiring diagram illustrating how to connect the receiver to the main power supply and the ceiling fan's motor and light wires using color-coded connections.
Vzdálené spárování
The remotes included in this kit come pre-paired with their respective receiver units and are set to different frequencies out of the box. No manual pairing process is typically required for initial setup. Each remote will operate only the fan it is paired with.
Návod k obsluze
The remote control provides convenient access to all functions of your ceiling fan and light. Ensure 2 AAA batteries are installed in the remote control (batteries not included).

Image: Close-up of the remote control, highlighting the fan speed buttons (LOW, MED, HI, STOP), light ON/OFF button, and timing buttons (1H, 2H, 4H, 8H).
- Ovládání rychlosti ventilátoru:
- AHOJ: Sets fan to high speed.
- MED: Nastaví ventilátor na střední rychlost.
- NÍZKÝ: Sets fan to low speed.
- ZASTÁVKA: Vypne ventilátor.
- Ovládání světla:
- LIGHT ON/OFF: Toggles the ceiling fan light on or off. Note: This kit does not support dimming functionality. The light will only turn ON or OFF.
- Funkce časování:
Set the fan to automatically turn off after a specified duration:
- 1H: Fan turns off after 1 hour.
- 2H: Fan turns off after 2 hours.
- 4H: Fan turns off after 4 hours.
- 8H: Fan turns off after 8 hours.
Údržba
- Čištění: Wipe the remote control and receiver (if accessible) with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Výměna baterie: When the remote control's range decreases or it becomes unresponsive, replace the AAA batteries. Ensure correct polarity when inserting new batteries.
- Podmínky prostředí: Avoid exposing the remote and receiver to excessive moisture, heat, or direct sunlight.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Remote not responding / Fan or light not working | No power to the fan; Dead batteries in remote; Incorrect wiring; Receiver malfunction. | Check circuit breaker; Replace remote batteries; Verify all wire connections are secure; Contact support if issue persists. |
| Světlo netlumí | This kit does not support dimming. | This is normal operation. The light function is ON/OFF only. |
| Ventilátor se neotáčí zpět | This kit does not support fan reverse. | This is normal operation. If your fan has a reverse switch, it must be operated manually on the fan body. |
| Receiver does not fit in canopy | Canopy space is too small. | While the receiver is small, some fan canopies are extremely compact. Double-check the dimensions before purchase. Ensure wires are neatly tucked. |
| Remote makes a beep sound with every button press | Normální provoz. | The beep sound is an audible confirmation of button presses and cannot be disabled. |
Specifikace
- Rozměry produktu: 5.7 x 4.72 x 2.32 palce
- Hmotnost položky: 11.7 unce
- Kompatibilní zařízení: AC Motor Ceiling Fan Light
- Speciální funkce: Timing (1H, 2H, 4H, 8H)
- Barva: White (Remote), Black (Receiver)
- Max Number of Supported Devices (per kit): 2 (referring to the two remote/receiver sets in this pack)
- Výrobce: LPHUMEX
- Země původu: Čína
Záruka a podpora
For warranty information and customer support, please refer to the product packaging or contact the seller directly through your purchase platform. LPHUMEX is committed to providing quality products and assistance.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.