Zavedení
This manual provides essential instructions for the safe and effective use of your AOLIKES 3.7V 1400mAh Lithium Polymer replacement battery. This battery is designed to power specific Sena communication systems and cameras. Please read this manual thoroughly before installation and use.
Image: The AOLIKES 3.7V 1400mAh Lithium Polymer battery with connector.
Bezpečnostní informace
Observe the following safety precautions to prevent damage to the battery or connected devices, and to ensure personal safety:
- Baterii nerozebírejte, nepropichujte ani neupravujte.
- Avoid exposing the battery to extreme temperatures (high or low), direct sunlight, or fire.
- Udržujte baterii mimo dosah vody nebo jiných kapalin.
- Používejte pouze kompatibilní nabíječky a metody nabíjení.
- Pokud baterie vykazuje známky nabobtnání, úniku nebo poškození, okamžitě ji přestaňte používat a řádně ji zlikvidujte.
- Uchovávejte mimo dosah dětí.
- The battery features built-in protection against overcharging, overheating, and short circuits to ensure optimal operation and reduce potential hazards.
Kompatibilita
This AOLIKES 3.7V 1400mAh battery is designed for specific Sena devices. Please verify your device model before installation.
Kompatibilní zařízení:
- Sena Spider RT1 Bluetooth Communication System
- Sena 50R 3-Button Motorcycle Bluetooth Headset
- Sena SP130
- Sena SP128
- Sena SP53
- Sena Prism Tube WiFi Camera
Důležitá poznámka k neslučitelnosti:
This battery is NOT compatible with Sena 50R or Sena 50R-01 Motorcycle Bluetooth Headsets.
Image: Visual representation of battery compatibility, highlighting specific Sena models it fits and does not fit.
Obsah balení
Každý balíček obsahuje následující položky:
- AOLIKES 3.7V 1400mAh Lithium Polymer Battery (Quantity: 2)
Image: The product packaging displaying the model number 822262A and barcode X0020KM47N.
Nastavení a instalace
The AOLIKES battery is designed for plug-and-play installation. However, replacing internal batteries in electronic devices may require specific tools and technical knowledge. If you are unsure, it is recommended to seek professional assistance to avoid damaging your device.
General Installation Steps (Consult your device's manual for specific instructions):
- Vypínací zařízení: Ensure your Sena device is completely powered off before beginning.
- Najděte přihrádku na baterie: Refer to your device's original manual to locate and open the battery compartment. This may involve removing screws or prying open casing.
- Odpojení staré baterie: Carefully disconnect the old battery's connector from the device's circuit board. Note the orientation of the connector.
- Vyjměte starou baterii: Gently remove the old battery. It may be secured with adhesive.
- Nainstalujte novou baterii: Place the new AOLIKES battery into the compartment. Ensure it fits correctly without bending or forcing.
- Připojení nové baterie: Connect the new battery's plug to the device's circuit board, ensuring the correct orientation.
- Bezpečná přihrádka: Zavřete a zajistěte přihrádku na baterie.
- Počáteční poplatek: Perform an initial charge as described in the "Operating" section.
Image: The AOLIKES battery showing its connector, illustrating the component to be plugged into the device.
Provozní
After successful installation, the battery is ready for use. For optimal performance and longevity, follow these guidelines:
- Počáteční poplatek: Před prvním použitím se doporučuje baterii plně nabít.
- Nabíjení: Use the original charger provided with your Sena device or a compatible charger. The battery's nominal voltage is 3.7V, and it fully charges to 4.2V.
- Splnit: Avoid completely draining the battery frequently. Lithium Polymer batteries benefit from partial discharge and recharge cycles. The shutdown voltage je 2.85V.
- Teplota: Operate the device with the battery within its recommended temperature range to ensure efficiency and safety.
Údržba
Správná údržba prodlužuje životnost vaší baterie:
- Skladování: If storing the battery for an extended period, charge it to approximately 50-60% and store it in a cool, dry place. Avoid full discharge or full charge during long-term storage.
- Čištění: Keep the battery and its contacts clean and dry. Use a soft, dry cloth if cleaning is necessary.
- Inspekce: Periodically inspect the battery for any physical damage, swelling, or signs of leakage.
Odstraňování problémů
Pokud narazíte na problémy s baterií, zvažte následující běžná řešení:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Baterie se nenabíjí | Incorrect connection, faulty charger, or incompatible device. | Ensure the battery is correctly connected. Try a different compatible charger. Verify device compatibility. |
| Zařízení se nezapíná | Battery not installed correctly, battery fully discharged, or device issue. | Re-check battery connection. Charge the battery. Test with another known good battery if possible. |
| Krátká výdrž baterie | Battery not fully charged, aging battery, or high power consumption by device. | Ensure full charge. If battery is old, consider replacement. Check device settings for power-saving options. |
Specifikace
Technical details for the AOLIKES 3.7V 1400mAh Lithium Polymer Battery:
| Funkce | Detail |
|---|---|
| Typ baterie | Polymer Lithium Ion Rechargeable Battery |
| Kapacita baterie | 1400 XNUMX mAh |
| Jmenovitý svtage | 3.7V |
| Plně nabitý svtage | 4.2V |
| Moc | 5.18 Wh |
| Vypnutí Voltage | 2.85V |
| Číslo modelu | 822262A (also referred to as RT1 Battery Replacement) |
| Hmotnost baterie | 22 gramů |
Záruka a podpora
Tento produkt je dodáván s a 30-day refund guarantee. For any issues or support inquiries, please contact your retailer or the manufacturer directly.
Informace o výrobci:
Výrobce: SHENZHEN XINLAN TECHNOLOGY CO., LTD
Adresa: No 401, 215 Hao ChenWuWei, GangTouCun, GuanHu SheQu, GuanLan JieDao, Longhua Qu, SHENZHEN, GUANGDONG, 518110, CN
E-mail: uk@rzfinter.com
tel: +86-13560728197
Zástupce EU:
Firmname: E-CrossStu GmbH
Adresa: Mainzer Landstr.69, Frankfurt am Main, Hessen, 60329 Deutschland
E-mail: e-crossstu@web.de
tel: +49 69332967674
Image: Product packaging showing manufacturer and EU representative contact details.