Zavedení
Thank you for choosing the HiFuture Futuremate2 Pro Open Ear TWS earphones. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your device. Please read this manual carefully before use and retain it for future reference.
Nastavení
1. Vybalení a komponenty
Opatrně vyjměte všechny položky z obalu. Balení by mělo obsahovat:
- HiFuture Futuremate2 Pro Open Ear TWS Earphones
- Nabíjecí pouzdro
- USB nabíjecí kabel
- Uživatelská příručka (tento dokument)
2. Nabíjení sluchátek a pouzdra
Před prvním použitím sluchátka a nabíjecí pouzdro plně nabijte.
- Connect the USB charging cable to the charging port on the case and to a compatible USB power adapter (not included).
- Kontrolka na nabíjecím pouzdře bude ukazovat stav nabíjení. Podrobnosti naleznete v části o kontrolkách.
- Place the earphones into the charging case. Ensure they are correctly seated; the earphones will begin charging automatically.
- Charging typically takes approximately 1-2 hours for the earphones and 2-3 hours for the charging case.
3. Párování Bluetooth
To connect your Futuremate2 Pro earphones to a device:
- Ujistěte se, že jsou sluchátka nabitá.
- Open the charging case. The earphones will automatically enter pairing mode, indicated by a flashing LED light on the earphones.
- Na svém zařízení (chytrém telefonu, tabletu atd.) povolte Bluetooth.
- Hledat available Bluetooth devices and select "HiFuture Futuremate2 Pro" from the list.
- Once connected, the earphone LED light will stop flashing or change to a solid color, indicating a successful connection.
- Sluchátka se po vyjmutí z pouzdra automaticky znovu připojí k poslednímu spárovanému zařízení, pokud je na zařízení povoleno Bluetooth.
Návod k obsluze
1. Zapnutí/vypnutí
- Zapnutí: Open the charging case, and the earphones will power on automatically. Alternatively, press and hold the touch control area on both earphones for 3 seconds.
- Vypnout: Vložte sluchátka zpět do nabíjecího pouzdra a zavřete víko. Případně stiskněte a podržte dotykovou oblast na obou sluchátkách po dobu 5 sekund.
2. Nošení sluchátek
The Futuremate2 Pro features an open-ear design for comfort and situational awareness.
- Určete levé (L) a pravé (R) sluchátko.
- Gently hook the earphone over your ear, ensuring the speaker is positioned near your ear canal without entering it directly.
- Adjust for a comfortable and secure fit.
3. Stiskněte Ovládací prvky
Sluchátka jsou vybavena dotykovým ovládáním pro různé funkce:
- Přehrát/pozastavit: Jedno klepnutí na kterékoli sluchátko.
- Další skladba: Dvakrát klepněte na pravé sluchátko.
- Předchozí skladba: Dvakrát klepněte na levé sluchátko.
- Zvýšit hlasitost: Trojité klepnutí na pravé sluchátko.
- Snížit hlasitost: Trojité klepnutí na levé sluchátko.
- Přijmout/ukončit hovor: Během příchozího hovoru klepněte jedním klepnutím na kterékoli sluchátko.
- Odmítnout hovor: Press and hold on either earphone for 2 seconds during an incoming call.
- Aktivovat Voice Assistant: Press and hold on either earphone for 2 seconds (when not on a call).
Údržba
1. Čištění
- Sluchátka a nabíjecí pouzdro pravidelně čistěte měkkým, suchým hadříkem, který nepouští vlákna.
- Nepoužívejte abrazivní čisticí prostředky, alkohol ani chemická rozpouštědla.
- Udržujte nabíjecí kontakty čisté a bez nečistot.
2. Skladování
- Pokud sluchátka nepoužíváte, uložte je do nabíjecího pouzdra, aby byla chráněna a zůstávala nabitá.
- Skladujte na chladném a suchém místě, mimo dosah extrémních teplot a přímého slunečního záření.
3. Péče o baterie
- Vyhněte se častému úplnému vybíjení baterie.
- Zařízení pravidelně nabíjejte, i když jej nepoužíváte často, abyste zachovali jeho stav.
- Do not attempt to replace the built-in Lithium Polymer batteries yourself. Contact authorized service personnel.
Odstraňování problémů
If you encounter issues with your HiFuture Futuremate2 Pro earphones, try the following solutions:
| Problém | Možné řešení |
|---|---|
| Sluchátka se nezapínají | Ensure earphones are charged. Place them in the charging case and close the lid, then open again. |
| Nelze spárovat se zařízením | Make sure Bluetooth is enabled on your device. Ensure earphones are in pairing mode (flashing LED). Forget the device from your Bluetooth list and try pairing again. Move closer to your device. |
| Žádný zvuk nebo nízká hlasitost | Check volume levels on both earphones and your connected device. Ensure earphones are properly connected. Try reconnecting. |
| One earphone not working | Ensure both earphones are charged. Place both back in the case, close, then reopen. Try resetting the earphones (refer to manufacturer's webwebu, kde v případě potřeby najdete konkrétní pokyny k resetování). |
| Problémy s nabíjením | Check the charging cable and adapter. Ensure charging contacts on earphones and case are clean. Try a different charging cable or power source. |
Specifikace
- Značka: HiFuture
- Model: Futuremate2 Pro
- Barva: Black (as per product specifications, actual product color may vary)
- Rozměry (produkt): 12 x 4.2 x 4.2 cm
- Hmotnost (produkt): 80 g
- Typ baterie: Lithium Polymer (vestavěný)
- Konektivita: Bezdrátové (Bluetooth)
- ASIN: B0D1R925DY
Záruka a podpora
The HiFuture Futuremate2 Pro earphones come with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging or visit the official HiFuture webpodrobné záruční podmínky naleznete na webu.
For technical support, troubleshooting assistance, or warranty claims, please contact HiFuture customer service through their official webwebu nebo kontaktních informací uvedených v dokumentaci k produktu.