MDCMDCM Solar Motion Sensor Outdoor Lights

Zavedení

Thank you for choosing the MDCMDCM Solar Motion Sensor Outdoor Lights. This manual provides essential information for the proper installation, operation, and maintenance of your new solar lights. Designed for outdoor use, these lights offer bright, motion-activated illumination for enhanced security and visibility in areas such as gardens, yards, patios, and pathways. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product.

Co je v krabici

Po vybalení se prosím ujistěte, že jsou všechny níže uvedené položky přítomny a v dobrém stavu:

• 2 x MDCMDCM Solar Motion Sensor Outdoor Lights
• 2x nástěnný držák
• Mounting Screws and Wall Plugs (typically 8 screws and 8 plugs)
• Uživatelská příručka
• Remote Controls (quantity may vary based on pack size, typically one per light or one for the set)

Klíčové vlastnosti

• Vysoký jas: 3000 Lumens output with 236 super bright LEDs for extensive illumination.
• Nastavitelný design: Three adjustable heads allow for flexible lighting direction and a 270° wide-angle lighting area.
• Duální pohybové senzory: Upgraded 2 smart PIR motion sensors provide a 180° detection angle within a range of 0-32 feet, offering wider and more sensitive coverage.
• Tři režimy svícení: Customizable lighting modes to suit various needs (details in Operating Instructions).
• Odolné a odolné vůči povětrnostním vlivům: IP65 waterproof rating and high-strength ABS material ensure durability against various weather conditions (waterproof, heat-resistant, frost-resistant).
• Efektivní solární nabíjení: Monocrystalline silicon glass panels with up to 50% conversion rate for efficient daytime charging.
• Baterie s dlouhou výdrží: Built-in 2000mAh large capacity battery for extended operation.
• Dlouhá životnost: Navrženo pro životnost přes 50 000 hodin.

Nastavení a instalace

Installation is designed to be quick and easy, requiring no wiring. Follow these steps for optimal performance:

1. Vyberte umístění: Select an outdoor location that receives direct sunlight for at least 6-8 hours daily to ensure the solar panel charges effectively. The recommended installation height is approximately 6.5 feet.
2. Namontujte držák: Use the provided screws and wall plugs to securely attach the wall bracket to your desired surface. Ensure the bracket is level.
3. Připojte světlo: Slide the solar light unit onto the mounted wall bracket until it clicks securely into place.
4. Nastavení světelných hlavic a solárního panelu: Adjust the three light heads to cover the desired illumination area. Position the solar panel to face the sun for maximum exposure throughout the day.

Instalační video

Video 1: This video demonstrates the unboxing and installation process for the MDCMDCM Solar Motion Lights Outdoor Waterproof.

Návod k obsluze

The solar light features three distinct lighting modes, which can be selected using the included remote control or the button on the unit. Ensure the light is turned on before selecting a mode.

• Mode 1 (Motion Activated 100% Brightness): The light remains OFF at night until motion is detected. Upon detection, it illuminates at 100% brightness for approximately 20 seconds, then turns OFF again.
• Mode 2 (Always 30% Brightness): The light stays ON at 30% brightness throughout the night, without motion sensor activation.
• Mode 3 (10% Brightness + Motion Activated 100% Brightness): The light stays ON at a dim 10% brightness at night. When motion is detected, it brightens to 100% for approximately 20 seconds, then returns to 10% brightness.

Údržba

To ensure your MDCMDCM Solar Motion Sensor Outdoor Lights continue to function effectively, follow these simple maintenance guidelines:

• Vyčistěte solární panel: Solární panel pravidelně otírejte měkkým hadříkemamp cloth to remove dust, dirt, leaves, or snow. A clean panel ensures maximum sunlight absorption and efficient battery charging.
• Zkontrolujte montáž: Periodically inspect the mounting screws and bracket to ensure the light remains securely attached to the surface. Tighten any loose screws as needed.
• Jasné překážky: Ensure no new obstructions (e.g., growing branches, new structures) are blocking direct sunlight from reaching the solar panel or interfering with the motion sensor's detection range.

Odstraňování problémů

If your solar light is not performing as expected, consider the following common issues and solutions:

• Světlo se v noci nezapíná:
  • Ensure the light is switched ON.
  • Verify the solar panel is receiving sufficient direct sunlight (6-8 hours) during the day. Relocate if necessary.
  • Check if the battery is fully charged. Allow for a full day of charging before first use or after prolonged storage.
  • Confirm the selected operating mode is appropriate for your needs.
• Pohybový senzor nedetekuje:
  • Ensure the motion sensors are clean and free from obstructions.
  • Check the detection range and angle. The dual sensors offer 180° detection up to 32 feet.
  • Verify the light is in Mode 1 or Mode 3 for motion activation.
• Světlo je tlumené nebo bliká:
  • Baterie nemusí být plně nabitá. Zajistěte dostatečné sluneční světlo.
  • Vyčistěte solární panel, abyste zlepšili účinnost nabíjení.
  • Extrémní teploty mohou ovlivnit výkon baterie.

Specifikace

Záruka a podpora

MDCMDCM provides a Omezená záruka for this product. Additionally, your purchase is backed by a 365denní záruka, ensuring that your light will not break or stop working under normal use conditions. For any questions, technical support, or warranty claims, please refer to the contact information provided in the user manual included in your package or visit the official MDCMDCM store on Amazon.