Ymiko Automatic Fish Feeder Instruction Manual

Zavedení

Welcome to the Ymiko Automatic Fish Feeder instruction manual. This document provides detailed guidance on the proper setup, operation, and maintenance of your new automatic fish feeder. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

Konec produktuview

Klíčové vlastnosti:

• Versatile Food Options: Dispenses dry, granular, and flake fish food.
• Convenient Feeding: Offers automatic or manual feeding for flexible schedules.
• Univerzální fit: Suitable for various aquarium sizes with options for individual placement or installation.
• Odolná konstrukce: Made from sturdy, stable plastic material.
• Jednoduché nastavení: Snadná instalace a obsluha.
• Prevence proti vlhkosti: Unique design prevents food from getting wet or clogged.

Obsah balení:

Před zahájením instalace se prosím ujistěte, že balení obsahuje všechny položky:

• 1 x Automatic Fish Feeder (Battery Not Included)
• 1 x Food Vessel
• 1 x Accessory (Mounting Clamp)
• 2 x šroub
• 1x lepicí páska

Image: All components of the Ymiko Automatic Fish Feeder, including the main unit, food vessel, mounting clamp, screws, and adhesive tape.

Nastavení

Instalace baterie:

1. The feeder requires 2 AA batteries (not included).
2. Otevřete kryt prostoru pro baterie umístěný na zadní straně jednotky.
3. Vložte baterie se správnou polaritou (+/-).
4. Bezpečně zavřete kryt bateriového prostoru.

Obrázek: Zadní view of the Ymiko Automatic Fish Feeder, highlighting the battery compartment and control buttons.

Způsoby instalace:

The feeder offers two installation options: clamping to the aquarium rim or adhesive mounting.

Metoda 1: Clamp Instalace

1. Připojte třamp accessory to the feeder unit using the provided screws.
2. Position the feeder on the edge of your aquarium. Ensure the food dispenser opening is directly above the water surface.
3. Tighten the adjustment screw on the clamp until the feeder is securely fastened to the aquarium rim.

Obrázek: Boční view of the Ymiko Automatic Fish Feeder, illustrating the clamp mechanism for aquarium rim attachment.

Metoda 2: Instalace lepidlem

1. Clean the desired mounting surface on your aquarium lid or side.
2. Peel the protective film from the adhesive tape.
3. Attach the adhesive tape to the bottom of the feeder's base.
4. Press the feeder firmly onto the cleaned surface for several seconds to ensure a strong bond.

Filling the Food Vessel:

1. Open the food vessel cover.
2. Fill the vessel with your preferred dry, granular, or flake fish food. Do not overfill.
3. Close the food vessel cover securely.

Image: The Ymiko Automatic Fish Feeder mounted on an aquarium, showing the food vessel filled with fish food.

Návod k obsluze

Setting Feeding Frequency:

1. The feeder offers two automatic feeding intervals: every 12 hours or every 24 hours.
2. Locate the "12H/24H" button on the back of the unit (refer to the image in the Battery Installation section).
3. Press the button once for a 12-hour feeding cycle. An indicator light will confirm the setting.
4. Press the button again for a 24-hour feeding cycle. The indicator light will confirm the setting.
5. The first feeding will occur immediately after setting the frequency.

Ruční krmení:

To dispense food manually at any time, press the yellow button on the side of the unit. One press will dispense a single portion of food.

Úprava množství podávaného jídla:

1. The feeder features an adjustable slider on the food vessel to control the amount of food dispensed per cycle.
2. Slide the adjustment lever to increase or decrease the opening size, thereby controlling the portion size.
3. Observe the first few feedings and adjust as necessary to prevent overfeeding.

Obrázek: Nahoře view of the Ymiko Automatic Fish Feeder, highlighting the adjustable slider for controlling food portion size.

Image: The Ymiko Automatic Fish Feeder actively dispensing food into an aquarium, demonstrating its function.

Údržba

Cleaning the Food Vessel:

1. Regularly clean the food vessel to prevent food residue buildup and maintain hygiene.
2. Remove the food vessel from the main unit.
3. Wash the vessel with warm water and a mild, non-toxic detergent. Rinse thoroughly.
4. Ensure the vessel is completely dry before refilling with food and reattaching to the feeder.

Výměna baterie:

Replace batteries when the indicator light dims or the feeder stops operating. Follow the battery installation steps outlined in the Setup section.