Návod k obsluze HEIMAN Wi-Fi chytrého detektoru úniku vody (model: 3pack-ws)

1. Úvod

The HEIMAN Wi-Fi Smart Water Leak Detector is designed to provide early warning of water leaks and potential flooding in various areas of your home. It features both an audible alarm and app notifications via Wi-Fi connectivity, ensuring you are alerted promptly to prevent water damage. This manual provides detailed instructions for setting up, operating, and maintaining your water leak detectors.

Image 1.1: HEIMAN Wi-Fi Smart Water Leak Detectors and companion app.

2. Klíčové vlastnosti

• Všestranné umístění: Can be placed in bathrooms, kitchens, basements, laundry rooms, and other areas prone to water leaks.
• High Quality & Durability: Features an exclusive bird's nest design with a 10-year sensor life. The included power battery (CR123A) lasts up to 5 years under normal use.
• Chytrá upozornění: Provides a 75dB audible alarm, a blue flashing reminder, and remote app notifications via a 2.4GHz Wi-Fi network (only 2.4GHz supported).
• Vysoká citlivost: Equipped with two bottom sensitive leak sensor probes capable of detecting water levels as low as 0.01 inches (0.22mm).
• IP67 Waterproof Technology: The outer shell is made of anti-UV material, ensuring reliable operation in humid and dusty environments. It can detect a minimum water level of 0.22mm and has a water level threshold of 1m.

Obrázek 2.1: Konecview of HEIMAN Smart Water Leakage Detector features.

3. Pokyny k nastavení

1. Aktivace baterie: Rotate the upper cover of the detector counter-clockwise to open it. Remove the battery insulation tape from the pre-installed CR123A battery. Close the cover by rotating it clockwise until secure.

Image 3.1: Remove battery insulation tape.
2. Vstupte do režimu párování: Long press the networking button inside the device for 5 seconds until the blue indicator light flashes quickly (approximately 2 times per second). This indicates the device is ready for pairing.


Image 3.2: Long press networking button.

3. Připojení přes aplikaci: Download and open the Tuya or Smart Life app on your smartphone. Log in to your account. Click the "+" icon to add a new device. Select "Sensor" then "Flood Detector (Wi-Fi)".

Image 3.3: Add device in the app.
4. Zadejte podrobnosti o Wi-Fi: Enter your 2.4GHz Wi-Fi network name and password when prompted by the app. The device will then be added to your app.


Image 3.4: Enter Wi-Fi credentials.

5. Umístění: Place the detector on a flat surface in areas where water leaks are a concern, such as near water heaters, washing machines, under sinks, or in basements. Ensure the two metal probes on the bottom of the device are in direct contact with the surface.


Obrázek 3.5: Příkladample placement in a laundry room.

4. Provoz

Once set up, the HEIMAN Wi-Fi Smart Water Leak Detector continuously monitors for water. When water is detected by the two bottom probes, the device will:

• Emit a loud 75dB audible alarm.
• Flash a blue LED light.
• Send a real-time notification to your smartphone via the connected app (Tuya/Smart Life).

Image 4.1: Real-time alarms and app notifications.

5. Údržba

• Výměna baterie: The detector uses a CR123A battery, which has an estimated life of up to 5 years under normal use. When the battery is low, the app will notify you. To replace, rotate the top cover counter-clockwise, remove the old battery, insert a new CR123A battery, and close the cover.
• Životnost senzoru: The sensor probes have a lifespan of approximately 10 years.
• Čištění: Periodically inspect the device and its probes for any dirt or debris. Clean with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.

Image 5.1: Low power consumption and long battery life.

6. Řešení problémů

• Zařízení se nepřipojuje k Wi-Fi: Ensure your Wi-Fi network is 2.4GHz. The device does not support 5GHz networks. Verify your Wi-Fi password is correct and the device is within range of your router. Follow the app pairing instructions carefully.
• No remote notifications: Verify the device is successfully connected to your 2.4GHz Wi-Fi network and the app is properly configured for notifications. Check your phone's notification settings to ensure the app has permission to send alerts.
• Alarm not loud enough: The device features a 75dB alarm. Ensure it is placed in an area where the sound can be heard. Consider placing multiple detectors in large or noisy areas.
• Sensor sensitivity issues: If the sensor does not detect water at very low levels, ensure the two bottom probes are making proper contact with the surface. Ensure there is no debris obstructing the probes.

7. Specifikace

Image 7.1: Compact design and dimensions of the detector.

8. Záruka a podpora

For warranty information, technical assistance, or customer support, please refer to the manufacturer's official webnebo se obraťte přímo na jejich zákaznický servis. Doporučuje se uschovat si účtenku jako doklad o koupi pro případné reklamace.