jindaaudio 288 LED Strobe Light

1. Úvod

Děkuji za nákupasing the jindaaudio 288 LED Strobe Light. This manual provides essential information for the safe and efficient operation of your device. Please read these instructions carefully before use and retain them for future reference.

2. Bezpečnostní pokyny

• Elektrická bezpečnost: Zajistěte napájení objtage matches the requirements specified on the device. Always connect to a grounded outlet. Disconnect power before cleaning or servicing.
• Umístění: Install the light in a well-ventilated area. Avoid covering ventilation openings. Do not expose the device to rain or moisture.
• Bezpečnost očí: Avoid direct eye exposure to the light source, especially during strobe effects, as it can cause discomfort or temporary vision impairment.
• Teplota: Do not operate the device in excessively high temperatures. Maintain adequate clearance around the unit for heat dissipation.
• Zacházení: S přístrojem zacházejte opatrně. Nenechte ho upadnout ani ho nevystavujte silným nárazům.

3. Obsah balení

Po vybalení prosím zkontrolujte, zda jsou všechny položky přítomny a v dobrém stavu:

• jindaaudio 288 LED Strobe Light (Model 288Strobe)
• Napájecí kabel
• Dálkové ovládání
• Návod k použití (tento dokument)

4. Konec produktuview

Familiarize yourself with the components of your 288 LED Strobe Light:

Obrázek 4.1: Přední strana view of the jindaaudio 288 LED Strobe Light with its remote control.

Obrázek 4.2: Detailní view showing the dimensions and rear panel connections, including DMX IN/OUT ports and power input.

Figure 4.3: Close-up of the rear panel, highlighting the efficient heat dissipation fan, control system, and 360-degree adjustable angle bracket.

Klíčové komponenty:

• LED panel: Features 288 high-brightness RGB LED patches for vibrant color output.
• Ovládací panel: Located on the rear, includes a digital display, mode buttons, and DMX connections.
• Chladicí ventilátor: Integrated for efficient heat dissipation, ensuring stable operation.
• Nastavitelný držák: Allows for 360-degree rotation for flexible positioning.
• Dálkové ovládání: Provides convenient wireless operation for various functions.

5. Nastavení

Follow these steps to set up your strobe light:

1. Rozbalení: Carefully remove the strobe light and all accessories from the packaging.
2. Montáž: The adjustable bracket allows for versatile mounting. Secure the light to a stable surface such as a wall, ceiling, or lighting stand using appropriate hardware (not included). Ensure the mounting point can support the weight of the fixture.
3. Umístění: Adjust the angle of the light using the side knobs on the bracket to direct the light as desired.
4. Připojení napájení: Connect the provided power cable to the 'POWER' input on the rear of the unit, then plug it into a suitable electrical outlet.
5. Dálkové ovládání: Ensure the remote control has working batteries. If not, insert or replace them according to the markings inside the battery compartment.

6. Návod k obsluze

The jindaaudio 288 LED Strobe Light offers multiple operating modes and effects:

6.1 Zapnutí/vypnutí

Once connected to power, the unit will power on. Use the power button on the remote control or the main power switch (if available) to turn the light on or off.

6.2 Provozní režimy

The light supports various modes, selectable via the control panel on the unit or the remote control:

• Režim RGB: Displays static colors or color combinations.
• Vzdálený režim: Controlled entirely by the included remote control.
• Režim DMX512: For professional control via a DMX controller. Connect DMX IN/OUT ports to your DMX system. Refer to the DMX channel chart (if provided separately) for specific controls.
• AUTO režim: Cycles through pre-programmed light shows automatically.
• Zvukově aktivovaný režim: The light reacts to music or sound, changing patterns and colors in sync with the beat.
• Režim Master/Slave: Link multiple units together. One unit acts as the 'Master' controlling other 'Slave' units for synchronized effects.

6.3 Light Effects and Adjustments

Figure 6.1: Visual representation of various RGB color combinations and dynamic light patterns achievable with the strobe light.

Use the remote control or the unit's control panel to adjust the following:

• Jas: Upravte celkovou intenzitu světla.
• Výběr barvy: Vyberte si z široké škály barev RGB.
• Rychlost stroboskopu: Control the flash rate in strobe mode.
• Effect Patterns: Select from various dynamic effects such as Strobe, Jump, Fade, Pulse, and Chase.

Obrázek 6.2: Přamples of the strobe light used in various environments, demonstrating its versatility, along with a detailed view of the individual RGB LEDs.

7. Údržba

Proper maintenance ensures the longevity and optimal performance of your strobe light:

• Čištění: Regularly clean the exterior of the unit with a soft, dry cloth. For stubborn dirt, use a slightly damp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
• Větrání: Ensure the cooling fan and ventilation openings remain clear of dust and debris. Use compressed air to gently clear any blockages if necessary.
• Skladování: When not in use for extended periods, store the light in a cool, dry place, away from direct sunlight and extreme temperatures.
• Inspekce: Periodically check the power cable and DMX connections for any signs of damage. If any damage is found, discontinue use and contact customer support.

8. Řešení problémů

Pokud narazíte na problémy se stroboskopickým světlem, podívejte se na následující běžné problémy a jejich řešení:

9. Specifikace

Detailed technical specifications for the jindaaudio 288 LED Strobe Light:

Figure 9.1: Energy Label for the jindaaudio 288LED Strobe. For more details, visit eprel.ec.europa.eu/qr/1993226.

10. Záruka a podpora

Pro informace o záruce, technickou podporu nebo servisní dotazy se prosím obraťte na svého prodejce nebo přímo na výrobce. Uschovejte si účtenku jako doklad o koupi.