JJC EN-EL25 USB Dual Slot Battery Charger

Zavedení

This manual provides essential information for the safe and efficient operation of your JJC EN-EL25 USB Dual Slot Battery Charger. This charger is designed to charge Nikon EN-EL25 batteries, commonly used in Nikon Z50, Z30, and Zfc cameras. Please read these instructions carefully before use and retain them for future reference.

Vlastnosti produktu

• Napájení přes USB: Charges batteries using various USB power sources such as wall chargers, laptops, power banks, or car chargers.
• Dual Slot Charging: Allows simultaneous charging of two batteries.
• Integrovaný USB kabel: Features a built-in USB cable for convenient portability.
• LED indikátory: Dual LED indicators display the charging status for each battery.
• Bezpečnostní ochrany: Includes overheat and overcharge protection to safeguard your batteries.
• Kompatibilita: Designed for original Nikon EN-EL25 batteries and compatible third-party EN-EL25 batteries.

Nastavení

To begin using your JJC EN-EL25 USB Dual Slot Battery Charger, follow these steps:

1. Vybalte nabíječku: Vyjměte nabíječku z obalu.
2. Access the USB Cable: The charger features a built-in USB cable. Gently pull out the USB connector from its storage slot on the side of the charger.

3. Připojení ke zdroji napájení: Plug the USB connector into a compatible USB power source. This can be a USB wall charger, a laptop's USB port, a power bank, or a car charger.

Watch this video for a visual guide on connecting the charger:

Návod k obsluze

Follow these steps to charge your camera batteries:

1. Vložte baterie: Carefully insert one or two Nikon EN-EL25 batteries into the designated charging slots (CH1 and CH2) on the charger. Ensure the battery contacts align correctly with the charger's pins.

2. Sledovat stav nabíjení: The dual LED indicators on the charger will display the charging status for each battery. During charging, the indicator lamp will flash. Once a battery is fully charged, its corresponding indicator lamp will remain constant (solid).

3. Vyjměte baterie: Once charging is complete (solid indicator light), carefully remove the batteries from the charger.

Údržba

Pro zajištění dlouhé životnosti a optimálního výkonu vaší nabíječky:

• Čištění: Use a soft, dry cloth to clean the charger. Avoid using liquid cleaners or solvents.
• Skladování: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures. When not in use, retract the built-in USB cable into its storage slot.
• Zacházení: Zabraňte pádu nabíječky nebo jejímu vystavení silným nárazům.

Odstraňování problémů

Pokud narazíte na problémy s nabíječkou, podívejte se na následující běžná řešení:

• Baterie se nenabíjejí:
  • Ujistěte se, že je kabel USB bezpečně připojen k nabíječce i ke zdroji napájení.
  • Verify that the power source is active and providing sufficient power (e.g., wall outlet is working, power bank is charged).
  • Check if the batteries are inserted correctly with contacts aligned.
  • For new batteries, some may require an initial small charge directly in the camera before they can be recognized by external chargers. Try charging the new battery briefly in your camera first.
  • Confirm that the batteries are compatible with the EN-EL25 standard.
• Kontrolky nefungují:
  • Ujistěte se, že je nabíječka správně připojena ke zdroji napájení.
  • If the charger or batteries feel excessively hot, the overheat protection may have activated. Disconnect and allow them to cool before attempting to charge again.

Specifikace

Záruka a podpora

JJC products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation included with your purchase or visit the official JJC webUschovejte si doklad o koupi pro případné reklamace.