RAF R.1175

RAF Electric Heater R.1175 User Manual

Model: R.1175 | Brand: RAF

1. Důležité bezpečnostní pokyny

Please read all instructions carefully before using this electric heater. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Elektrická bezpečnost: Ensure the heater is connected to a 220V, 50Hz grounded outlet. Do not overload electrical circuits. Avoid using extension cords unless absolutely necessary and ensure they are rated for the heater's wattage (2400W).
  • Umístění: Place the heater on a stable, level surface. Maintain a minimum distance of 1 meter (3 feet) from walls, furniture, curtains, and other combustible materials. Do not place the heater in areas where it may be exposed to water or high humidity.
  • Větrání: Do not cover the heater or block its air inlets/outlets. Proper ventilation is essential to prevent overheating.
  • Dozor: Nenechávejte ohřívač během provozu bez dozoru. Udržujte děti a domácí zvířata v dostatečné vzdálenosti od ohřívače.
  • Údržba: Always unplug the heater from the power outlet before cleaning or performing any maintenance.
  • Poškození: Do not operate the heater with a damaged cord or plug, or if the heater has malfunctioned or been dropped. Contact qualified service personnel for repair.
  • Zamýšlené použití: This heater is designed for indoor use only, specifically for heating rooms. Do not use it for drying clothes or other purposes.

2. Konec produktuview

The RAF Electric Heater R.1175 is a 2400W radiant heater designed to provide efficient warmth for indoor spaces. It features an adjustable temperature control for personalized comfort and is built for floor mounting.

RAF Electric Heater R.1175 with packaging, showing features like 2400W power, high-speed hot, large firepower, overheating protection, and heat-wide angle heat reflectors.

Figure 2.1: RAF Electric Heater R.1175 and its packaging, highlighting key features.

RAF Electric Heater R.1175, front view, showing the heating elements and control knob.

Obrázek 2.2: Přední strana view of the RAF Electric Heater R.1175.

3. Technické specifikace

FunkceSpecifikace
ZnačkaRAF
Číslo modeluR.1175
BarvaČervený
Výkon (Wattage)2400W
svtage220V
Frekvence50 Hz
Speciální funkceNastavitelná teplota
Hmotnost položky2 kg
Zdroj napájeníElektrický kabel
Rozměry produktu (DxŠxV)40 cm x 40 cm x 35 cm
Typ montážeMontáž na podlahu
Typ pokojeIndoor Use (e.g., Study Room)
Pokrytí topeníAž 250 čtverečních stop
Topné tělesoZářivý

4. Pokyny k nastavení

  1. Vybalte ohřívač: Carefully remove the heater from its packaging. Retain packaging materials for future storage or transport.
  2. Kontrola poškození: Before first use, inspect the heater for any signs of damage. Do not use if damaged.
  3. Vyberte umístění: Place the heater on a firm, level, heat-resistant surface. Ensure there is at least 1 meter (3 feet) of clear space around the heater from all combustible materials (e.g., furniture, curtains, paper). Do not place it directly under a power outlet.
  4. Připojení napájení: Ensure the heater's power cord is fully extended and not tangled. Plug the heater directly into a suitable 220V, 50Hz grounded wall outlet. Avoid using extension cords or power strips if possible. If an extension cord is necessary, ensure it is rated for 2400W or higher.

5. Návod k obsluze

  1. Zapnutí: Once plugged in, locate the power switch or knob on the heater. Turn it to the "ON" position or desired heat setting.
  2. Adjust Temperature/Heat Settings: The RAF R.1175 features adjustable temperature control. Rotate the thermostat knob (if present) or select the desired heat level (e.g., Low, Medium, High) to achieve your preferred room temperature. The heater will cycle on and off to maintain the set temperature.
  3. Počáteční použití: During the first few minutes of operation, a slight odor may be detected. This is normal and will dissipate quickly.
  4. Vypnout: To turn off the heater, switch the power control to the "OFF" position. Unplug the heater from the wall outlet when not in use for extended periods.

6. Údržba a skladování

  • Čištění: Před čištěním vždy odpojte ohřívač ze zásuvky a nechte jej zcela vychladnout. Použijte měkký,amp hadříkem k otření vnějších povrchů. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla. Zajistěte, aby se do vnitřku ohřívače nedostala voda.
  • Odstranění prachu: Periodically use a vacuum cleaner with a brush attachment to remove dust from the grilles and heating elements.
  • Skladování: When not in use, store the heater in a cool, dry place, preferably in its original packaging. Ensure the power cord is neatly wrapped and not kinked.

7. Řešení problémů

If your heater is not operating correctly, please check the following before contacting customer support:

ProblémMožná příčinaŘešení
Ohřívač se nezapne.Not plugged in; Power outlet not working; Power switch is off; Overheat protection activated.Ensure the plug is securely inserted. Test the outlet with another appliance. Turn the power switch to "ON". Unplug the heater, wait 10-15 minutes for it to cool down, then plug it back in.
Topidlo produkuje nedostatečné teplo.Temperature setting is too low; Room is too large for the heater; Blocked air inlets/outlets.Increase the temperature setting. Ensure the heater is appropriate for the room size (up to 250 sq ft). Clear any obstructions from the heater's grilles.
Heater emits unusual noise or smell.First-time use odor (normal); Internal component issue; Dust accumulation.A slight odor is normal for initial use and will dissipate. If the noise or smell persists or is strong, unplug immediately and contact service. Clean dust from the heater.

8. Záruka a zákaznická podpora

For warranty information, please refer to the documentation provided with your purchase or contact the retailer. Keep your proof of purchase for warranty claims.

If you experience any issues not covered in the troubleshooting section, or require further assistance, please contact RAF customer support through their official channels or your point of purchase.

© 2024 RAF. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.