POPETPOP LED Aquarium Light Clip-on Fish Tank Lamp Uživatelská příručka

Zavedení

Thank you for choosing the POPETPOP LED Aquarium Light. This manual provides essential information for the safe and effective use of your new aquarium lampPřed instalací a uvedením do provozu si prosím pečlivě přečtěte tyto pokyny a uschovejte si je pro budoucí použití.

Image: The POPETPOP LED Aquarium Light, featuring a flexible gooseneck, a circular LED head, an inline power switch, and a USB power cable with a clip for attachment.

Bezpečnostní informace

• Ensure the power source is compatible with the device's USB input (3W).
• Do not immerse the light head or USB connector in water. This product is not submersible.
• Uchovávejte mimo dosah dětí.
• Před prováděním jakékoli údržby nebo čištění odpojte napájení.
• Nepokoušejte se jednotku rozebírat ani opravovat sami. Pro servis se obraťte na kvalifikovaný personál.
• Ensure the clip is securely attached to the aquarium wall to prevent accidental detachment.

Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• 1 x POPETPOP LED Aquarium Lamp

Obrázek: Podrobný view of the light's components, showing the LED array, the USB plug, and the inline power switch.

Vlastnosti produktu

• Odolná konstrukce: Made of plastic material, designed for wear resistance and safety in an aquatic environment.
• Flexibilní krk: Allows for easy adjustment of light angle and position.
• Bezpečný klip: Designed for stable attachment to aquarium walls with a thickness between 2-5mm (0.08-0.2 inches).
• Barevné LED světlo: Provides illumination that enhances fish colors and supports aquatic plant growth through comprehensive photosynthesis.
• Kompaktní design: Small and lightweight, minimizing space usage.

Obrázek: Detail views highlighting the safety of the materials and the practical design of the inline switch and LED light panel.

Pokyny pro nastavení

1. Rozbalte světlo: Carefully remove the LED aquarium light from its packaging.
2. Určete místo montáže: Choose a suitable location on the edge of your aquarium where the light can be securely clipped. Ensure the aquarium wall thickness is between 2-5mm.
3. Připojte klip: Align the light's clip with the aquarium wall and press down firmly to secure it in place. Ensure it is stable and does not wobble.
4. Umístěte světlo: Adjust the flexible neck to direct the light over your desired area of the aquarium.
5. Připojte napájení: Plug the USB connector into a compatible USB power adapter (not included) or a USB port on another device.

Image: The LED aquarium light securely clipped to the edge of a fish tank, demonstrating proper installation and illumination.

Návod k obsluze

1. Zapnutí: Once the USB cable is connected to a power source, press the inline switch located on the cable to turn the light on.
2. Upravit pozici: If needed, gently adjust the flexible neck to fine-tune the light's direction.
3. Vypnout: Press the inline switch again to turn the light off.

Údržba

• Čištění: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the light head and flexible neck. Do not use abrasive cleaners or immerse any part of the light in water.
• Pravidelná kontrola: Periodically check the USB cable for any signs of damage or wear. Ensure the clip remains securely attached to the aquarium.
• Skladování: If storing the light for an extended period, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight.

Odstraňování problémů

Specifikace

Image: A diagram illustrating the dimensions of the light, showing a length of 18cm (7.07in) and a head width of 4cm (1.57in).

Záruka a podpora

For warranty information or technical support, please refer to the retailer's policy or contact POPETPOP customer service through their official channels. Keep your purchase receipt as proof of purchase.

Pro další pomoc můžete navštívit POPETPOP Store on Amazon.