1. Úvod
This manual provides detailed instructions for the assembly, operation, and maintenance of your Rfiver Table Top TV Stand. Please read this manual thoroughly before installation and use to ensure proper setup and safe operation. This stand is designed to securely hold most 37 to 86 inch flat or curved TVs, with a maximum load capacity of 150 lbs.
2. Bezpečnostní informace
- Před montáží se ujistěte, že jsou všechny součásti přítomny a nepoškozené. Nepoužívejte, pokud některé součásti chybí nebo jsou vadné.
- Nepřekračujte maximální nosnost 68 kg (150 liber).
- Ověřte, zda je montážní vzor VESA vašeho televizoru kompatibilní se stojanem (200x200 mm až 800x600 mm).
- Always use two or more people to lift and position the TV onto the stand.
- Umístěte televizní stolek na stabilní a rovný povrch, aby se nepřevrátil.
- Udržujte děti a domácí zvířata mimo oblast montáže.
3. Obsah balení
Please check the package to ensure all the following parts are included:
- TV Stand Base (2 pieces)
- Vertical TV Brackets (2 pieces)
- Connecting Bars (2 pieces)
- Sada hardwaru (různé šrouby, podložky, distanční podložky pro montáž televizoru)
- Cable Fasteners
- Protiskluzové podložky
- Soundbar Isolation Pads
- Návod k použití
4. Nastavení a instalace
Follow these steps carefully for proper assembly. It is recommended to have a second person assist during the TV attachment phase.
4.1 Assemble Brackets
Begin by assembling the vertical TV brackets and connecting bars. Ensure all screws are tightened securely.
Image showing the first step of assembly: assembling the brackets.
4.2 Připevněte držáky k TV
Carefully place your TV face down on a soft, clean surface. Attach the assembled brackets to the VESA mounting holes on the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and level.
Image illustrating the process of attaching the TV stand brackets to the television's VESA mounting points.
4.3 Attach Feet to Brackets
Connect the TV stand bases (feet) to the vertical TV brackets. This design features a double T-shaped structure for enhanced stability. Ensure all connections are firm.
Image highlighting the T-shaped structural support for improved stability.
4.4 Final Placement and Cable Management
Carefully lift the TV with the attached stand and place it on your desired surface. Apply the non-slip pads to the bottom of the stand's feet to prevent scratches and ensure stability. Use the included cable fasteners to organize and secure cables behind the TV, creating a tidy setup.
Images showing the cable management clip and non-slip pad for organized and stable setup.
5. Návod k obsluze
5.1 Nastavení výšky
The Rfiver Table Top TV Stand features 6 levels of height adjustment, with each level providing approximately 1.8 inches of change. The total height can be adjusted up to 8.9 inches, allowing you to customize the viewing angle for optimal comfort. To adjust the height, carefully loosen the screws on the vertical brackets, slide the TV to the desired height, and then securely tighten the screws.
Image illustrating the various height adjustment levels of the TV stand.
5.2 Umístění soundbaru
The stand's design allows for placement of a soundbar on the feet of the stand. Utilize the provided shock-absorbing soundbar isolation pads to reduce vibration and enhance your audio-visual experience.
Image demonstrating a soundbar placed on the stand's feet, utilizing the isolation pads.
6. Údržba
Abyste zajistili dlouhou životnost a vzhled vašeho televizního stolku, dodržujte tyto jednoduché pokyny pro údržbu:
- Pravidelně kontrolujte všechny šrouby a spoje, zda jsou pevně utažené. V případě potřeby je dotáhněte.
- Stojan čistěte měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, která by mohla poškodit povrchovou úpravu.
- Keep the stand free from dust and debris.
- Avoid placing heavy objects on the stand's feet unless they are specifically designed for that purpose (e.g., soundbars with isolation pads).
7. Řešení problémů
If you encounter any issues with your Rfiver Table Top TV Stand, please refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| TV wobbles or feels unstable | Screws are loose; stand not on a level surface; weight capacity exceeded. | Check and tighten all screws. Move the stand to a level surface. Ensure TV weight is within 150 lbs limit. |
| Obtížné nastavení výšky | Screws are too tight; obstruction in adjustment slots. | Loosen adjustment screws sufficiently. Check for any debris in the adjustment slots. |
| Scratches on furniture surface | Non-slip pads not applied or misplaced. | Ensure non-slip pads are correctly applied to the bottom of the stand's feet. |
If the problem persists, please contact Rfiver customer service for assistance.
8. Specifikace
| Funkce | Detail |
|---|---|
| Značka | Rfiver |
| Model | B0CZ7X2W4B |
| Kompatibilní velikosti TV | 37 až 86 palců |
| Maximální nosnost | 150 lb (68 kg) |
| Kompatibilita VESA | 200x200mm až 800x600mm |
| Nastavení výšky | 6 levels, up to 8.9 inches total adjustment |
| Materiál | Legovaná ocel |
| Barva | Černý |
| Rozměry produktu | 17.3 x 14.4 x 37.9 palce (přibližně, sestaveno) |
| Hmotnost položky | 7.72 libry |
Image detailing the compatibility of the TV stand with various TV sizes and VESA mounting patterns.
9. Záruka a podpora
Rfiver products are manufactured with quality and durability in mind. For warranty information or technical support, please refer to the warranty card included with your product or visit the official Rfiver website. Our customer service team is available to assist you with any questions or concerns regarding your TV stand.