YANGHOPES 10LED StagNávod k obsluze světelné lišty e Wash

1. Úvod

Děkuji za nákupasing the YANGHOPES 10LED Stage Wash Light Bar. This professional lighting fixture is designed to create dynamic and vibrant effects for various events, including KTV, clubs, discos, weddings, and parties. Featuring 10 RGBW 4-in-1 high-brightness LED beads, it offers versatile color mixing and beam effects. This manual provides essential information for safe installation, operation, and maintenance of your device.

2. Bezpečnostní informace

Please read and understand all safety instructions before installing or operating this product. Failure to do so may result in electric shock, fire, or serious injury.

• Zajistěte napájení objtage matches the product's requirements (AC95V-245V/50Hz).
• Always connect the product to a grounded circuit to avoid electrical shock.
• Do not open the housing. There are no user-serviceable parts inside. Refer all servicing to qualified personnel.
• Avoid direct eye exposure to the light source. The intense light can cause eye damage.
• Keep the device away from rain, moisture, and liquids.
• Ensure adequate ventilation around the fixture to prevent overheating. Do not block ventilation openings.
• Mount the fixture securely using appropriate hardware and ensure it is stable.
• Před čištěním nebo prováděním jakékoli údržby odpojte zařízení od napájení.

3. Obsah balení

Po vybalení ověřte, zda jsou přítomny všechny komponenty:

• 1 x YANGHOPES 10LED Stage Wash Light Bar (Model: 2Mixing Beam Light-0807)
• 1 x napájecí kabel
• 2 x montážní držáky
• Šrouby pro montáž držáků
• 1 x Uživatelská příručka (tento dokument)

Image: The 10LED Stage Wash Light Bar with its included accessories: power cable, mounting brackets, and user manual.

4. Specifikace

Image: Technical drawing illustrating the dimensions of the light bar.

5. Nastavení

5.1 Montáž

The light bar can be installed in various orientations:

• Standing Installation: The unit features four foot pads on the bottom for stable placement on a flat surface.
• Overhead/Truss Mounting: Use the provided mounting brackets to securely attach the fixture to a truss or other suitable overhead structure. Ensure all connections are tight and secure to prevent accidental falls.

Obraz: Views of the light bar, including its rear panel with connections and mounting bracket attachment points.

5.2 Připojení napájení

Connect the included power cable to the power input on the rear of the fixture and then to a compatible power outlet. Ensure the power source meets the specified voltage požadavky.

5.3 DMX připojení (volitelné)

For DMX control, connect a DMX cable from your DMX controller to the DMX IN port on the first fixture. For multiple fixtures, daisy-chain them by connecting the DMX OUT of the first fixture to the DMX IN of the next, and so on. Ensure the last fixture in the chain has a DMX terminator connected to its DMX OUT port.

6. Návod k obsluze

The 10LED Stage Wash Light Bar offers four primary control modes:

6.1 Automatický režim

In Auto mode, the fixture cycles through pre-programmed light shows automatically. This mode is ideal for quick setup and dynamic effects without external control.

Video: Demonstration of the 10LED Stage Wash Light Bar operating in various automatic and DMX-controlled modes, showcasing color changes and beam movements.

6.2 Režim aktivace zvukem

In Sound Activated mode, the light bar responds to ambient sound and music, creating light patterns that synchronize with the beat. Adjust sensitivity if needed.

Video: A short demonstration of the 10LED Moving Head Bar light, highlighting its dynamic movement and color capabilities, likely in an automatic or sound-activated mode.

6.3 Režim Master/Slave

This mode allows multiple light bars to operate in synchronization without a DMX controller. Connect the DMX OUT of the "Master" unit to the DMX IN of the "Slave" unit. The Master unit controls all connected Slave units, replicating its light show. Ensure all units are set to the correct Master/Slave settings.

Image: Multiple light bars displaying synchronized light beams, demonstrating the Master/Slave capability.

6.4 DMX512 Control

For advanced control, use a DMX512 controller. The fixture supports 7, 13, 23, or 43 DMX channels, allowing precise control over individual LED colors (RGBW), dimming, strobe effects, gradient colors, jump changes, and 180° synchronized head shake. Refer to the DMX channel chart (usually provided separately or on the product display) for specific channel functions.

Image: The light bar showcasing a variety of colorful beam patterns, achievable through DMX control.

Video: A dynamic display of the 10LED Stage Wash Light Bar, demonstrating its RGBW color mixing and strip beam effects, suitable for various stage osvětlovací aplikace.

7. Údržba

Regular maintenance ensures optimal performance and extends the lifespan of your light bar.

• Čištění: Periodically clean the lenses and exterior housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
• Inspekce: Regularly check power cables, DMX cables, and mounting hardware for any signs of wear, damage, or loose connections.
• Skladování: Pokud svítidlo nepoužíváte, skladujte jej v suchém a bezprašném prostředí, nejlépe v originálním obalu nebo ochranném pouzdře.

8. Řešení problémů

Pokud narazíte na problémy, podívejte se na následující běžné problémy a jejich řešení:

Pokud problém přetrvává i po vyzkoušení těchto řešení, kontaktujte zákaznickou podporu.

9. Záruka a podpora

YANGHOPES is committed to providing quality products and customer satisfaction. For warranty information, technical support, or any questions regarding your 10LED Stage Wash Light Bar, please contact YANGHOPES customer service through the retailer where the product was purchased or visit the official YANGHOPES webmísto.

Kontaktní údaje:

• Značka: JANGHOPES
• Webmísto: YANGHOPES Store on Amazon
• E-mail/Telefon: Refer to your purchase documentation or the brand's official webstránky s nejaktuálnějšími kontaktními údaji.