1. Úvod
The Lumens VS-KB21 is an advanced IP camera controller designed for professional video production environments. It provides comprehensive control over up to 255 IP-connected cameras, supporting various communication interfaces including RS-232, RS-422, and Ethernet. Key features include a 4-axis joystick for precise Pan/Tilt/Zoom control, a 3-inch LCD for RTSP preview, and user-assignable keys for quick access to functions. This manual provides detailed instructions for setting up, operating, and maintaining your VS-KB21 controller.
2. Konec produktuview
Familiarize yourself with the components and controls of the VS-KB21 controller.
2.1 Ovládací prvky na předním panelu
Obrázek 1: Přední strana view of the Lumens VS-KB21 IP Camera Controller, showing the joystick, LCD screen, and various control buttons and knobs.
- joystick: 4-axis control for Pan, Tilt, and Zoom.
- LCD obrazovka: 3-inch display for RTSP video preview a navigaci v menu.
- Knoflíky: Dedicated controls for Iris, Shutter, Gain, White Balance, and Focus.
- Klávesnice: Numeric and function keys for camera selection, preset recall, and menu input.
- User-Assignable Keys (F1, F2): Přizpůsobitelná funkční tlačítka.
- Zoom Seesaw Lever: For precise zoom control (Tele/Wide).
2.2 Připojení zadního panelu
Obrázek 2: Zadní view of the Lumens VS-KB21 IP Camera Controller, highlighting the connectivity ports.
- Port RS-422: For serial communication with cameras.
- Port RS-232: For serial communication with cameras.
- SERVICE Port: USB port for firmware updates and service.
- ETHERNET port: RJ-45 connector for IP control and PoE (Power over Ethernet).
- DC IN 12V: Power input for the included DC adapter.
- Vypínač: Zapínací/vypínací vypínač jednotky.
- LOCK Slot: For security cable.
3. Nastavení
Follow these steps to set up your VS-KB21 controller.
- Připojení napájení:
- Connect the provided DC 12V power adapter to the 'DC IN 12V' port on the rear panel and plug it into a power outlet.
- Alternatively, if using a PoE-enabled network switch, connect an Ethernet cable from the switch to the 'ETHERNET' port. The unit will power on via PoE.
- Network Connection (for IP Control):
- Connect an Ethernet cable from the 'ETHERNET' port on the controller to your network switch or router. Ensure the controller and IP cameras are on the same network segment.
- Serial Connection (for RS-232/RS-422 Control):
- For RS-232 control, connect a serial cable from the 'RS-232' port on the controller to the camera's RS-232 port.
- For RS-422 control, connect a serial cable from the 'RS-422' port on the controller to the camera's RS-422 port.
- Počáteční zapnutí:
- Flip the 'POWER' switch to the ON position. The LCD screen will illuminate, and the controller will initialize.
- Konfigurace kamery:
- Access the controller's settings menu via the LCD to add and configure your IP or serial cameras. Refer to the on-screen prompts for IP address, port, and protocol settings (VISCA, VISCA Over IP).
4. Návod k obsluze
This section details the operation of the VS-KB21 controller for managing your cameras.
4.1 Výběr kamery
- Press the 'CAM LIST' button to view a list of configured cameras.
- Use the numeric keypad (CAM 1-7) or the joystick to select the desired camera.
- Press 'ENTER' to confirm your selection.
4.2 Ovládání otáčení, naklápění a zoomu (PTZ)
- Pan/Tilt: Move the 4-axis joystick left/right for pan and up/down for tilt.
- Lupa: Rotate the joystick head or use the 'TELE' (zoom in) and 'WIDE' (zoom out) buttons on the seesaw lever.
- PTZ Speed: Adjust the 'PTZ SPEED' knob to control the responsiveness of the joystick.
4.3 Ovládání ostření
- Press the 'AUTO FOCUS' button for automatic focus adjustment.
- For manual focus, use the 'FOCUS' knob: rotate 'NEAR' to focus on closer objects, 'FAR' for distant objects.
4.4 Expozice a vyvážení bílé
- Expoziční režim: Press 'EXPOSURE MODE' to cycle through auto, manual, and shutter priority modes.
- Iris/Shutter/Gain: Use the dedicated knobs to adjust these parameters in manual exposure mode.
- Vyvážení bílé: Press 'WB MODE' to select white balance presets or 'ONE PUSH WB' for automatic one-push white balance.
4.5 předvoleb
- Uložení předvolby: Position the camera as desired, then press 'SAVE' followed by a numeric key (0-9) to store the preset.
- Vyvolání presetu: Press 'CALL' followed by the numeric key corresponding to the saved preset.
4.6 RTSP Preview
- The 3-inch LCD screen supports RTSP video preview from the selected IP camera. Ensure the camera's RTSP stream is correctly configured in the controller's settings.
- Press 'PVW' to toggle the preview zapnuto/vypnuto.
5. Údržba
Proper maintenance ensures the longevity and optimal performance of your VS-KB21 controller.
- Čištění: Use a soft, dry cloth to clean the exterior of the controller. For stubborn marks, a slightly damp Lze použít hadřík s jemným čisticím prostředkem, přičemž se ujistěte, že do zařízení nevnikne žádná tekutina.
- Skladování: Pokud regulátor nepoužíváte, skladujte jej na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
- Aktualizace firmwaru: Periodically check the Lumens official website for firmware updates. Updates can be installed via the 'SERVICE' USB port.
- Vyhněte se tekutinám: Nevystavujte ovladač vodě ani jiným kapalinám.
- Vyhněte se dopadu: Protect the device from physical shocks and drops, especially the joystick.
6. Řešení problémů
Řešení běžných problémů naleznete v této části.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Ovladač se nezapne. | No power supply; Power switch off; Faulty power adapter/PoE. | Ensure power adapter is connected and outlet is active. Check PoE connection. Verify power switch is ON. |
| Cannot control camera via IP. | Incorrect IP settings; Network issue; Camera not configured; Firewall blocking. | Verify IP address, subnet mask, and gateway settings. Ensure controller and camera are on the same network. Check camera configuration in controller. Disable firewalls temporarily for testing. |
| No RTSP preview na LCD. | Incorrect RTSP stream URL; Network congestion; Camera not streaming. | Confirm the RTSP stream URL in the controller's settings matches the camera's output. Check network bandwidth. Ensure the camera is actively streaming. |
| Joystick control is unresponsive or erratic. | Loose cable connection; Joystick calibration needed; Physical damage. | Check all cable connections. Refer to the controller's menu for joystick calibration options. If issues persist, contact support. |
7. Specifikace
Detailed technical specifications for the Lumens VS-KB21 IP Camera Controller.
| Funkce | Popis |
|---|---|
| Komunikační rozhraní | RS-232 / RS-422 / IP (Ethernet) |
| Zobrazit | 3palcový LCD |
| Joystick | 4-axis (Pan / Tilt / Zoom) |
| Ovládání rychlosti | 1 Knoflík |
| Ovládání zoomu | 1 Seesaw Lever |
| Gain Control | R/B zisk |
| Ovládání zaostření | Auto / Manual |
| Přiřaditelná tlačítka | 2 (F1, F2) |
| Klávesnice | Podsvícený |
| Stream Preview | RTSP |
| Přenosová rychlost | 2400 / 4800 / 9600 / 38400 / 115200 bps |
| Camera Address Range | 1~255 |
| Předvolby | 255 |
| Moc | DC 12V / PoE |
| Rozměry (ŠxVxH) | 11.89 x 5.63 x 4.41 palce (30.2 x 14.3 x 11.2 cm) |
| Hmotnost | 2.8 libry (1.27 kg) |
| Barva | Černý |
| Název modelu | VS-KB21 |
8. Záruka a podpora
For warranty information, technical support, or service inquiries, please visit the official Lumens webnebo se obraťte na autorizovaného prodejce. Uschovejte si účtenku jako doklad o koupi pro případ reklamace.
Lumeny Webmísto: www.mylumens.com