Hyuduo 2.4G Wireless Barcode Scanner User Manual

Zavedení

This manual provides instructions for the proper setup, operation, and maintenance of your Hyuduo 2.4G Wireless Barcode Scanner. This device is designed for efficient and accurate barcode scanning in various environments such as grocery stores, distribution centers, restaurants, and small businesses.

The scanner features a durable ABS and PC material construction, a long-lasting 2000mAh lithium battery, and supports a wide range of 1D barcode types.

1. Nastavení

1.1 Vybalení

Opatrně vyjměte všechny součásti z obalu. Ujistěte se, že jsou přítomny následující položky:

• 1 x čtečka čárových kódů
• 1 x Connect Cable (USB)
• 1 x Receiver (2.4G Wireless Dongle)
• 1 x Uživatelská příručka (tento dokument)

1.2 Připojení přijímače

To use the scanner wirelessly, plug the 2.4G wireless receiver into an available USB port on your computer or host device. The system should automatically detect and install the necessary drivers.

Image: The Hyuduo barcode scanner shown with its USB receiver, ready for connection.

1.3 Nabíjení skeneru

The scanner comes with a built-in 2000mAh lithium battery. Before initial use, it is recommended to fully charge the scanner. Connect the scanner to a USB power source using the provided connect cable. The charging indicator light will show the charging status.

2. Návod k obsluze

2.1 Zapnutí/vypnutí

Press and hold the trigger button to power on the scanner. To power off, press and hold the trigger button again until the scanner indicates it is off (e.g., via a specific sound or light pattern).

Obrázek: Boční view of the scanner highlighting the orange trigger button for operation.

2.2 Skenování čárových kódů

Point the scanning head towards the barcode you wish to scan. Press the trigger button. A red LED light will emit from the scanning head. Position the scanner so the red light covers the entire barcode. A successful scan will be indicated by a buzzer sound and a light indicator.

Image: A hand holding the Hyuduo barcode scanner, demonstrating its use to scan a product.

2.3 Supported Barcode Types (1D)

The scanner supports the following 1D barcode symbologies:

• EAN13
• EAN 8
• UPC A
• UPC E0
• UPC E1
• Kód128
• Kód39
• Kód93
• Proložené 2 z 5
• Průmyslová 25
• Kód11
• CodeBar
• RSS 14
• RSS Ltd
• RSS Exp
• Standardní 2 z 5
• Plessey
• ChinaPost 25
• Kompozit GS1

2.4 Alarmy a indikátory

The scanner provides visual (light) and auditory (buzzer) feedback for various operational statuses, including successful scans and low battery warnings.

3. Údržba

3.1 Čištění

To maintain optimal performance, keep the scanning window clean. Use a soft, lint-free cloth, slightly dampened with water or a mild cleaning solution, to gently wipe the scanning window. Avoid abrasive materials or harsh chemicals that could scratch the surface.

3.2 Skladování

Skener skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot. Pokud jej delší dobu nepoužíváte, ujistěte se, že je baterie částečně nabitá (kolem 50 %), abyste prodloužili její životnost.

3.3 Péče o baterii

The built-in lithium battery is designed for long life. To maximize battery health, avoid fully discharging the battery frequently and do not leave it uncharged for prolonged periods.

4. Řešení problémů

4.1 Skener nereaguje

• Zkontrolujte připojení: Ensure the 2.4G receiver is securely plugged into a USB port and the scanner is powered on.
• Úroveň baterie: Verify the scanner has sufficient battery charge. Recharge if necessary.
• Opravit: If the scanner is not connecting, try re-pairing it with the receiver according to the instructions in the full manual (if applicable, usually involves scanning a specific barcode).

4.2 Čárové kódy se neskenují

• Typ čárového kódu: Confirm that the barcode type is supported by the scanner (refer to Section 2.3).
• Kvalita čárového kódu: Ensure the barcode is clear, undamaged, and not smudged.
• Vzdálenost a úhel: Adjust the distance and angle between the scanner and the barcode. The optimal scanning angle is 55 degrees.
• Okno skenování: Clean the scanning window for any obstructions or dirt.

4.3 No Buzzer Sound or Light Indicator

• Nastavení: Check if the buzzer or indicator lights have been disabled through configuration settings (refer to the full manual for advanced settings).
• Poškození: If the issue persists, the unit may be damaged. Contact customer support.

5. Specifikace

6. Záruka a podpora

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official Hyuduo webmísto. Uschovejte si doklad o koupi pro případ záručních reklamací.