Summer Infant Ingenuity Pop 'N Ride Lightweight Stroller Wagon

Důležité bezpečnostní informace

Read all instructions before assembly and use of the stroller wagon. Keep this manual for future reference. Failure to follow these instructions could result in serious injury or death.

• This product is designed for children aged 6 months and older.
• Maximum weight capacity: 50 pounds (22.7 kg) per seat. Do not exceed this limit.
• Always secure children with the 3-point safety harness.
• Ensure the wagon is fully open and locked before placing children inside.
• Never leave children unattended in the wagon.
• Do not use this product for purposes other than its intended use as a child transport wagon.
• Avoid placing heavy bags or items on the handles as this may cause the wagon to tip.
• The canopy provides UPF 50+ sun protection. Ensure it is properly positioned to shield children from direct sunlight.
• This product is not compatible with car seats.

Obrázek 1: Safety features including the 3-point harness, foot-activated brakes, and the UPF 50+ canopy. The product has undergone third-party safety testing.

Obsah balení

Před zahájením montáže ověřte, zda jsou všechny komponenty přítomny.

• Stroller Wagon Frame
• Kola (4)
• Odnímatelná stříška
• Rodič držák na pohár
• Návod k použití

Nastavení a montáž

1. Rozkládání vozu: Place the folded wagon on a flat surface. Release any locking mechanisms. Pull the frame upwards and outwards until it clicks into its fully open position. Ensure all frame joints are securely locked.
2. Uchycení kol: Insert each wheel into its designated slot on the wagon frame until it clicks securely into place. Pull on each wheel to confirm it is firmly attached.
3. Instalace Canopy: Attach the canopy support rods into the designated slots on the wagon frame. Extend the canopy fabric over the rods and secure it using any attached fasteners (e.g., Velcro, clips).
4. Attaching the Cupholder: Clip the parent cupholder onto the desired location on the handle or frame.

Obrázek 2: The fully assembled stroller wagon, ready for use.

Návod k obsluze

Pushing and Pulling

The Pop 'N Ride Stroller Wagon features height-adjustable handles for both pushing and pulling. To adjust the handle height, locate the adjustment buttons or levers on the handle and press/lift them while moving the handle to the desired position. Release to lock.

Obrázek 3: The wagon can be operated by pushing or pulling, utilizing the adjustable handles.

Securing Children

Each seat is equipped with a 3-point safety harness. Place the child in the seat, bring the harness straps over their shoulders and between their legs, then connect the buckles securely. Adjust the straps for a snug fit.

Obrázek 4: Detail of the 3-point safety harness being fastened.

Brzdový systém

The wagon is equipped with foot-activated brakes on the rear wheels. To engage the brakes, press down firmly on the brake levers located near the wheels. To release, lift the levers upwards.

Obrázek 5: Engaging the foot-activated brake on a wheel.

Skládání pro skladování a přepravu

To fold the wagon, ensure children and all items are removed. Release the canopy and any locking mechanisms on the frame. Follow the specific folding sequence (refer to diagrams on the product or quick-start guide if available) to collapse the wagon into a compact form. Secure with any integrated latches.

Obrázek 6: The wagon in its compact, folded state, suitable for storage or transport.

Obrázek 7: The compact folded size allows for easy placement in a vehicle trunk.

Storage Pockets and Cupholder

Utilize the integrated storage pockets for small items. The parent cupholder provides a convenient place for beverages.

Obrázek 8: The mesh storage pocket for carrying essentials.

Obrázek 9: The convenient parent cupholder.

Údržba a péče

• Čištění: The fabric components of the wagon should be hand washed only. Use mild soap and cold water. Do not bleach. Air dry thoroughly.
• Čištění rámu: Otřete kovové a plastové součásti rámu čisticím prostředkem.amp cloth and mild soap. Dry completely.
• Údržba kola: Periodically check wheels for debris and ensure they rotate freely. Clean as needed.
• Skladování: Store the wagon in a clean, dry place away from direct sunlight and extreme temperatures when not in use.
• Inspekce: Regularly inspect the wagon for loose fasteners, worn parts, or damaged materials. Do not use if any components are damaged.

Odstraňování problémů

• Wagon does not unfold/fold smoothly: Před skládáním nebo rozkládáním se ujistěte, že jsou všechny zajišťovací mechanismy uvolněné. Zkontrolujte, zda ve skládacích spojích nejsou nějaké překážky.
• Wheels are difficult to turn: Inspect wheels for trapped debris (e.g., dirt, hair). Clean the wheel axles if necessary. Ensure wheels are properly attached.
• Postroj není zajištěn: Check that the buckle components are aligned correctly and click firmly into place. Adjust straps for a snug fit.
• Canopy not staying in place: Ensure the canopy support rods are fully inserted and any fasteners are securely attached.

Pokud narazíte na problémy, které zde nejsou uvedeny, nebo potřebujete další pomoc, kontaktujte prosím zákaznickou podporu.

Specifikace

Obrázek 10: Key dimensions and weight capacity of the stroller wagon.

Informace o záruce

This Summer Infant Ingenuity Pop 'N Ride Lightweight Stroller Wagon is covered by a 90denní omezená záruka od data nákupu. Tato záruka se vztahuje na výrobní vady vzniklé běžným používáním. Nevztahuje se na škody způsobené nesprávným použitím, nehodami, neoprávněnými úpravami nebo běžným opotřebením.

Uschovejte si prosím doklad o koupi pro uplatnění záruky.

Zákaznická podpora

For further assistance, troubleshooting, or to inquire about warranty claims, please contact Summer Infant customer service. Refer to the product packaging or the official Summer Infant webstránky s nejaktuálnějšími kontaktními informacemi.

Při kontaktování podpory mějte prosím po ruce číslo modelu (32194) a doklad o koupi.