BN-LINK Countdown Timer Switch (Model CP-U211C) User Manual

Zavedení

Thank you for choosing the BN-LINK Countdown Timer Switch (Model CP-U211C). This device is designed to provide convenient, energy-saving control for your exhaust fans, bathroom fans, and various lighting types. By automating shut-off operations, it helps reduce energy consumption and improve convenience in your home or office.

Please read this manual thoroughly before installation and operation to ensure proper use and safety.

Důležité bezpečnostní informace

VAROVÁNÍ: RIZIKO ÚRAZU ELEKTRICKÝM PROUDEM.

• Installation must be performed by a qualified electrician or a person with a thorough understanding of electrical wiring and systems.
• Always turn off power at the circuit breaker or fuse box before installing or servicing the switch.
• This device requires a neutral wire for operation. If your existing switch box does not have a neutral wire, consult a qualified electrician.
• For single-pole applications only. Do not use with 3-way or multi-way switches.
• Ujistěte se, že všechna vodičová spojení jsou bezpečná a řádně izolovaná.
• Nepřekračujte maximální elektrické jmenovité hodnoty zařízení.
• Provozní svtage: 125V, 60 Hz.
• Current Rating: 15A/1875W Resistive or General Purpose, 10A/1250W Ballast or Tungsten, ½ HP, TV-5.

Nastavení a instalace

This section provides instructions for installing your BN-LINK Countdown Timer Switch. Ensure power is OFF before proceeding.

Obsah balení:

• BN-LINK Countdown Timer Switch
• Nástěnná deska
• Montážní šrouby
• Drátěné matice

Požadované nástroje (nejsou součástí dodávky):

• Šroubovák (Phillips a plochý)
• Odizolovače drátů
• Elektrická páska
• svtage Tester

Kroky instalace:

1. Vypnout napájení: Locate the circuit breaker controlling the switch you are replacing and turn it OFF. Verify power is off using a voltage tester.
2. Demontáž starého spínače: Carefully remove the existing wall plate and unscrew the old switch from the wall box. Disconnect the wires from the old switch, noting which wire was connected to which terminal.
3. Identifikace vodičů: Identify the following wires in your wall box:
   • Hot Wire (Line): Obvykle černá, přivádí napájení z jističe.
   • Zaváděcí drát: Typically black, sends power to the light/fan.
   • Neutrální vodič: Typically white. A neutral wire is REQUIRED for this switch.
   • Zemnící vodič: Typicky zelená nebo holá měď.
4. Zapojení nového přepínače: Connect the wires from your wall box to the BN-LINK timer switch using the provided wire nuts. Refer to the wiring diagram below.
   • Připojte Černý drát od časového spínače k Hot Wire (Line) z nástěnné krabice.
   • Připojte Červený drát od časového spínače k Načíst drát z nástěnné krabice.
   • Připojte Bílý drát od časového spínače k Neutrální drát z nástěnné krabice.
   • Připojte Zelený drát od časového spínače k Zemní vodič z nástěnné krabice.
5. Zajistěte přepínač: Carefully fold the wires and push the timer switch into the wall box. Secure it with the mounting screws.
6. Instalace nástěnné desky: Attach the provided wall plate over the switch.
7. Obnovit napájení: Znovu zapněte napájení jističem.
8. Testovací provoz: Test the timer switch to ensure it functions correctly.

Obraz: Wiring diagram for the BN-LINK Countdown Timer Switch. This diagram illustrates the connection points for the ground wire (green), load wire (red), hot wire (black), and neutral wire (white) to the timer switch. A clear warning states "Neutral Wire Must Required."

Návod k obsluze

The BN-LINK Countdown Timer Switch features intuitive touch controls for easy operation.

Obraz: Přední view of the BN-LINK Countdown Timer Switch, highlighting the "Touch ON/OFF Button" at the top and the six "Touch to select time" buttons (1 Min, 5 Min, 10 Min, 20 Min, 30 Min, 1 Hour). LED indicators are also shown, indicating which countdown is active.

Funkce tlačítek:

• Tlačítko napájení (horní): This is the main ON/OFF button.
  • Press once to turn the connected device (light/fan) ON indefinitely.
  • Press again to turn the connected device OFF.
  • This button can also override any active countdown timer, turning the device OFF immediately.
• Countdown Timer Buttons (1 Min, 5 Min, 10 Min, 20 Min, 30 Min, 1 Hour): These buttons activate a preset countdown.
  • Press any of these buttons to turn the connected device ON for the selected duration.
  • The device will automatically turn OFF once the countdown expires.
  • An LED indicator next to the selected time will illuminate to show the active countdown.

Example použití:

To turn on your bathroom fan for 10 minutes, simply press the "10 Min" button. The fan will run for 10 minutes and then automatically shut off. If you need to turn it off sooner, press the top Power button.

Všestranné aplikace

The BN-LINK Countdown Timer Switch is suitable for a wide range of applications, enhancing convenience and energy efficiency in various areas of your home or business.

Obraz: A collage of four images demonstrating common applications for the timer switch: a bathroom, a closet, a laundry room, and a garage. This illustrates the versatility of the product in different environments.

• Koupelny: Control exhaust fans to reduce humidity and prevent mold growth.
• Closets & Pantries: Automatically turn off lights after a set time, preventing wasted energy.
• Garáže: Manage lighting or ventilation systems.
• Prádelny: Control exhaust fans or lighting.
• Spas & Enclosed Patios: Conveniently manage lighting or small ventilation units.

This timer switch is compatible with incandescent, fluorescent, and LED lighting, as well as bathroom exhaust fans and heaters within its specified electrical ratings.

Údržba

The BN-LINK Countdown Timer Switch requires minimal maintenance.

• Čištění: To clean the surface of the switch, gently wipe with a soft, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky, rozpouštědla ani agresivní chemikálie, protože by mohly poškodit povrchovou úpravu nebo vnitřní součásti.
• Inspekce: Periodically inspect the switch and wall plate for any signs of damage or loose connections. If any issues are found, turn off power at the circuit breaker and consult a qualified electrician.
• Žádné díly opravitelné uživatelem: Uvnitř spínače nejsou žádné součásti, které by mohl uživatel opravit. Nepokoušejte se jednotku sami otevírat ani opravovat.

Odstraňování problémů

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact BN-LINK Customer Support.

Specifikace

Obraz: Detailed dimensions of the BN-LINK Countdown Timer Switch and its accompanying wall plate. The image shows the height (5 inches for plate, 2.76 inches for switch body), width (3.3 inches for plate, 1.57 inches for switch body), and depth (1.73 inches for switch body).

Záruka a podpora

BN-LINK products are designed to meet high-quality standards. For warranty information or technical support, please contact BN-LINK customer service.

Please have your model number (CP-U211C) and purchase date available when contacting support.

Kontaktní údaje:

• Refer to the BN-LINK official webNejnovější kontaktní údaje naleznete na webu nebo na obalu produktu.
• Online support may be available through the BN-LINK brand store on Amazon or their official webmísto.