Uživatelská příručka k nástěnnému držáku pro TV Pipishell Full Motion

Zavedení

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Pipishell Full Motion TV Wall Mount Brackets. These mounts are designed to securely hold your flat or curved screen television, offering flexible viewing angles. Please read this manual thoroughly before installation and keep it for future reference.

Obrázek: Overview of Pipishell Full Motion TV Wall Mounts, including models for both smaller and larger televisions.

Bezpečnostní informace

VAROVÁNÍ: Nepřečtení a nedodržení všech pokynů může vést ke zranění osob, poškození majetku nebo ke ztrátě záruky. Pokud těmto pokynům nerozumíte nebo máte pochybnosti o bezpečnosti instalace, obraťte se na kvalifikovaného instalatéra.

• Do not install on drywall alone. Ensure the mount is secured to a solid wood stud, concrete, or brick wall.
• Verify your TV's VESA pattern, weight, and size are within the mount's specifications.
• Use only the provided hardware. Do not use damaged or missing parts.
• Instalaci, zejména při zvedání televizoru, by měly provádět vždy alespoň dvě osoby.
• Ujistěte se, že všechny šrouby jsou bezpečně utažené, ale nepřetahujte je.

Seznam dílů

Before installation, ensure all parts are present and undamaged. Refer to your specific model's packaging for a complete list of included hardware.

Image: Included components for the PILF8 model, showing the main mount assembly, TV attachment rails, cable management ties, and a bubble level.

Image: Included components for the PIMF2 model, showing the main mount assembly and TV attachment rails.

Klíčové komponenty:

• Wall Plate Assembly (with articulating arms)
• TV Bracket Rails
• Various Screws, Washers, and Spacers for TV and Wall Attachment
• Concrete Anchors (for concrete/brick wall installation)
• Stahovací pásky
• Úroveň bublin
• Anti-Drop End Caps (PILF8)
• Security Screws (PILF8)

Specifikace

Image: Compatibility check points for your TV and wall type.

Nastavení a instalace

Požadované nástroje (nejsou součástí dodávky):

• Tužka
• Šroubovák s křížovou hlavou
• Elektrická vrtačka
• Vyhledávač trámů (pro dřevěné trámové stěny)
• Nástrčný klíč nebo nastavitelný klíč
• Kladivo (na betonové kotvy)

Kontrolní seznam před instalací:

1. Ověřte, zda hmotnost a uchycení televizoru VESA odpovídají specifikacím držáku.
2. Identify your wall type (wood stud, solid concrete, or brick). Nemontujte pouze na sádrokarton.
3. Locate the desired mounting position, ensuring it is at a comfortable viewing height and away from electrical wires or plumbing.

Kroky instalace:

Image: Simplified 3-step installation process.

1. Připevnění držáků televizoru k televizoru:

   Carefully place your TV face down on a soft, clean surface. Align the TV bracket rails with the VESA mounting holes on the back of your TV. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV. Secure the brackets to the TV, ensuring they are level and firmly attached.

   

   Obrázek: Podrobný view of the PIMF2 mount, highlighting the TV bracket attachment points.

2. Montáž nástěnné desky na zeď:

   Determine the exact mounting location. Use a stud finder to locate wood studs if applicable. For concrete or brick walls, mark drill holes directly. Use the wall plate as a template to mark the drill holes. Drill pilot holes according to the recommended drill bit size for your wall type. Secure the wall plate to the wall using the appropriate lag bolts and washers. For concrete/brick, insert concrete anchors before securing the lag bolts. Ensure the wall plate is level using the included bubble level.

   

   Image: Wall compatibility guide for installation.

3. Zavěšení televizoru na nástěnnou desku:

   With assistance, carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the TV brackets are securely seated on the wall plate's arms. Tighten any security screws or locking mechanisms on the TV brackets to prevent accidental dislodgement. Perform post-installation leveling if necessary (for PILF8 model, +/-3° adjustment is available).

   

   Image: Key safety features like security screws and anti-drop end caps.

Ovládání držáku televizoru

Your Pipishell full motion TV mount allows for various adjustments to achieve the optimal viewzkušenosti.

• Otočný: Gently push or pull the TV to swivel it left or right. The PILF8 offers +/-45° swivel, while the PIMF2 offers up to +/-90° (depending on TV size).
• Náklon: Loosen the tilt adjustment knobs or bolts on the TV brackets, adjust the TV to your desired tilt angle (+5° to -15°), and then re-tighten the knobs/bolts to secure the position.
• Vysunutí/zasunutí: Pull the TV away from the wall to extend the articulating arms, or push it back towards the wall to retract it. The PILF8 extends up to 15.4 inches and retracts to 3.2 inches. The PIMF2 extends up to 17 inches and retracts to 2.2 inches.

Image: Demonstrating the swivel function for comfortable viewing úhly.

Image: Demonstrating the extension and retraction capabilities of the mount.

Image: Full range of motion for the PIMF2 mount, including extension, tilt, and swivel.

Údržba

Pravidelná údržba zajistí dlouhou životnost a bezpečný provoz vašeho televizního držáku.

• Periodically check all screws and bolts to ensure they remain securely tightened.
• Držák čistěte měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
• If the mount's movement becomes stiff, a small amount of silicone-based lubricant can be applied to the articulating joints (avoiding contact with the TV or wall).

Odstraňování problémů

Záruka a podpora

For warranty information or technical support, please contact Pipishell customer service through their official website or the retailer where the product was purchased. Please have your product model (PILF8 or PIMF2) and purchase details ready when contacting support.

You can visit the Pipishell Store for more information: Obchod Pipishell na Amazonu