1. Úvod
The OMTech RYGEL-LSP0300 Fume Extractor is designed to provide a cleaner and safer working environment by effectively removing harmful fumes, smoke, and odors generated during various industrial and crafting processes. This unit features a robust 4-stage filtration system, a powerful 300W DC motor, and user-friendly controls, making it suitable for applications such as laser engraving, welding, and soldering.
Image 1.1: The OMTech RYGEL-LSP0300 Fume Extractor unit.
2. Bezpečnostní informace
Please read and understand all safety instructions before operating the fume extractor. Failure to follow these instructions may result in injury or damage to the unit.
- Ujistěte se, že je jednotka umístěna na stabilním rovném povrchu.
- Do not block the air intake or exhaust vents. Maintain adequate clearance around the unit for proper airflow.
- Připojte přístroj k uzemněné zásuvce se správným napětímtage.
- Do not operate the unit in wet conditions or expose it to liquids.
- Regularly inspect power cords and connections for damage. Discontinue use if any damage is found.
- Always turn off and unplug the unit before performing any maintenance, cleaning, or filter replacement.
- Udržujte děti a neoprávněné osoby v dostatečné vzdálenosti od provozované jednotky.
- Use appropriate personal protective equipment (PPE) when working with materials that produce hazardous fumes, even with the fume extractor in operation.
3. Komponenty produktu
The OMTech RYGEL-LSP0300 Fume Extractor comes with the following components:
Image 3.1: Comprehensive set of components.
- Fume Extractor Unit
- Extrakční trubice
- Odsávací digestoř
- Napájecí kabel
- Hadice Clamps
- Dálkové ovládání
- Tubing Adapters (3.2" to 4.7", 3.2" to 5.9", and 3.2" to 2.6")
- Exhaust Vent Collar
4. Nastavení
Follow these steps to set up your fume extractor:
- Rozbalení: Opatrně vyjměte všechny součásti z obalu. Uschovejte si obal pro budoucí skladování nebo přepravu.
- Umístění: Position the fume extractor on a flat, stable surface near your workspace. The unit is equipped with four caster wheels for easy mobility. Lock the wheels once positioned.
- Connect Extraction Tube: Attach the flexible extraction tube to the fume extractor's inlet port. Secure it with a tubing clamp.
- Attach Extraction Hood: Connect the extraction hood to the other end of the flexible tube. Position the hood near the source of fumes. The 360° swivel tube allows for precise positioning.
- Vyberte adaptér: Choose the appropriate tubing adapter (3.2" to 4.7", 3.2" to 5.9", or 3.2" to 2.6") for your specific cutting or engraving machine and connect it to the extraction hood if needed for a secure fit.
Image 4.1: User-friendly features including swivel tube, wheels, and handles.
Image 4.2: Tubing adapters for broad compatibility.
- Připojení napájení: Plug the power cord into the fume extractor and then into a suitable grounded electrical outlet.
5. Návod k obsluze
Operating the fume extractor is straightforward using the digital control panel or the included remote control.
Image 5.1: Digital control panel for customized operation.
- Zapnutí/vypnutí: Stisknutím tlačítka napájení na ovládacím panelu nebo dálkovém ovladači zapnete nebo vypnete jednotku.
- Adjusting Airflow Speed: Use the 'FLOW+' and 'FLOW-' buttons to select from 10 different speed levels. Higher speeds provide greater fume extraction.
- Nastavení časovače: Press the 'TIME SET' button to activate the timer function. Use the 'FLOW+' and 'FLOW-' buttons to set the operating duration from 1 to 300 minutes. The unit will automatically shut off after the set time.
- Dálkové ovládání: The included remote control allows for convenient adjustment of speed and timer settings from a distance.
The 300W DC motor generates a maximum airflow of 467 m³/h (275 cfm), ensuring efficient removal of fumes and purification of air with up to 99.97% efficiency.
Image 5.2: Visual demonstration of effective fume extraction.
The unit operates quietly, with noise levels typically below 60 dB, minimizing disruption in your workspace.
Image 5.3: Quiet operation of the fume extractor.
6. Údržba
Regular maintenance ensures optimal performance and longevity of your fume extractor. Always unplug the unit before performing any maintenance.
Obrázek 6.1: Trojkytagsystém elektronických filtrů.
6.1 Výměna filtru
The fume extractor utilizes a 4-stage filtrační systém:
- Primary Cotton Filter (PM10): Captures larger particles.
- Primary PP Filter (PM0.5): Filters finer particles.
- Filtr s aktivním uhlím: Traps harmful gases and odors.
- HEPA H13 Filter (PM0.3): Captures very fine particles with high efficiency.
Filters should be inspected regularly and replaced when they become visibly dirty or when you notice a decrease in extraction efficiency or an increase in odors. The lifespan of filters varies depending on usage and the type of fumes being extracted.
- Turn off and unplug the fume extractor.
- Open the filter compartment access panel.
- Carefully remove the old filters, noting their order and orientation.
- Použité filtry zlikvidujte v souladu s místními předpisy.
- Insert new filters in the correct order and orientation.
- Close the filter compartment access panel securely.
6.2 Čištění
- Otřete vnější část jednotky měkkým, damp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
- Periodically check the extraction tube and hood for any blockages and clean as necessary.
7. Řešení problémů
If you encounter issues with your fume extractor, refer to the following table:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Jednotka se nezapne | No power supply; Power cord loose; Unit switch off | Check power outlet; Ensure power cord is securely plugged in; Turn on the unit using the power button. |
| Low airflow or poor extraction | Clogged filters; Blocked extraction tube/hood; Fan speed too low | Inspect and replace filters if necessary; Clear any blockages in the tube or hood; Increase fan speed using the control panel or remote. |
| Neobvyklý hluk během provozu | Loose components; Obstruction in fan; Unit not on a level surface | Check for loose parts; Turn off and unplug, then inspect fan for obstructions; Ensure unit is on a stable, level surface. |
| Odors persist despite extraction | Activated carbon filter saturated; Filters not properly installed | Replace the activated carbon filter; Ensure all filters are correctly seated. |
8. Specifikace
| Číslo modelu | RYGEL-LSP0300 |
| Výrobce | OMTech |
| Rozměry produktu | 18.5 x 14.6 x 20.2 palce |
| Výkon motoru | 300W DC |
| Max Airflow | 467 m³/h (275 cfm) |
| Filtrační systém | 4-Stage (Primary Cotton, Primary PP, Activated Carbon, HEPA H13) |
| Účinnost filtrace | až 99.97 % |
| Úrovně rychlosti | 10 |
| Rozsah časovače | 1-300 minut |
| Úroveň hluku | Pod 60 dB |
| Kompatibilita | Various cutting and engraving machines (with included adapters) |
9. Záruka
OMTech products are covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official OMTech webPodrobné záruční podmínky naleznete na webových stránkách. Uschovejte si doklad o koupi pro případ reklamace.
10. Podpora
For technical assistance, troubleshooting, or spare parts, please contact OMTech customer support:
- Webmísto: www.omtechlaser.com
- E-mail: support@omtechlaser.com (example)
- Telefon: 1-800-XXX-XXXX (např.ample)
When contacting support, please have your model number (RYGEL-LSP0300) and purchase date available.