TECHTONICS MP3 Bluetooth 4.1 Decoder Board User Manual

Zavedení

This manual provides detailed instructions for the proper installation, operation, and maintenance of your TECHTONICS MP3 Bluetooth 4.1 Decoder Board. Please read this manual thoroughly before using the product to ensure safe and efficient operation.

Obrázek: Nahoře view of the TECHTONICS MP3 Bluetooth 4.1 Decoder Board, showing its compact design and various components.

Bezpečnostní informace

• Zajistěte napájení objtage is within the specified range (3.7V to 5V DC). Exceeding this range can damage the board.
• Avoid short-circuiting the power terminals or output connections.
• Do not expose the board to moisture, extreme temperatures, or static electricity.
• Handle the board with care to prevent damage to components.
• This product is intended for use by individuals with basic electronics knowledge.

Konec produktuview a Komponenty

The TECHTONICS MP3 Bluetooth 4.1 Decoder Board integrates MP3 decoding and Bluetooth 4.1 reception capabilities into a compact module. It features multiple power input options and audio output methods for versatile application.

Obrázek: Podrobný view of the decoder board with key components labeled, including the Bluetooth decoder IC, USB input power port, LED indicator, 3.5mm stereo audio output, and power input terminals (DC 3.7-5V, BAT).

Klíčové komponenty:

• Bluetooth Decoder IC: Main chip responsible for Bluetooth communication and audio decoding.
• Micro USB port: For 5V DC power input.
• Battery Terminals (BAT+, BAT-): For 3.7V to 5V DC battery power input.
• 3.5mm audio jack: Stereo audio output for headphones or speakers.
• Audio Output Solder Pads (L, R, GND): Alternative stereo audio output connections.
• LED indikátor: Provides status feedback (e.g., power, Bluetooth pairing).

Specifikace

Pokyny pro nastavení

1. Připojení napájení

The board can be powered using one of two methods:

• Micro USB port: Connect a standard Micro USB cable to the board's Micro USB port and a 5V DC power source (e.g., USB charger, power bank).
• Svorky baterie: Connect a 3.7V to 5V DC battery to the BAT+ (positive) and BAT- (negative) solder pads. Ensure correct polarity to prevent damage.

Poznámka: Do not connect both Micro USB and battery power simultaneously unless the battery charging circuit is designed for it. Typically, only one power source should be used at a time.

2. Připojení audio výstupu

Choose one of the following methods to connect your audio output device:

• 3.5mm audio jack: Plug your headphones or speakers directly into the 3.5mm stereo audio jack on the board.
• Solder Pads: Solder the Left (L), Right (R), and Ground (GND) wires of your speakers or amplifier to the corresponding solder pads on the board.

Návod k obsluze

1. Zapnutí

Once power is supplied to the board (via Micro USB or battery), the LED indicator will illuminate, indicating the board is powered on and ready for operation.

2. Párování Bluetooth

1. Ensure the Bluetooth decoder board is powered on. The LED indicator will typically blink, signifying it is in pairing mode.
2. Na smartphonu nebo jiném zařízení s podporou Bluetooth přejděte do nastavení Bluetooth.
3. Scan for available devices. The board should appear as a device named similar to "BT-MINI" or a generic Bluetooth audio device.
4. Select the device to pair. Once successfully paired, the LED indicator on the board may change its blinking pattern or become solid.
5. You may hear an audible confirmation tone from your connected speakers/headphones.

3. Přehrávání zvuku

After successful pairing, any audio played on your connected Bluetooth device will be streamed to the decoder board and output through the connected speakers or headphones.

Údržba

• Keep the board clean and free from dust. Use a soft, dry brush or compressed air for cleaning.
• Store the board in a dry environment, away from direct sunlight and extreme temperatures.
• Avoid physical shock or excessive vibration.

Odstraňování problémů

Záruka a podpora

For technical assistance, warranty information, or product support, please contact TECHTONICS customer service through the retailer where the product was purchased or visit the official TECHTONICS website. Please have your model number (TECH2135-000) and purchase details ready.

TECHTONICS Store Link: Visit the TECHTONICS Store on Amazon