Zavedení
The TELESIN A10 Smart Wireless Bluetooth Remote Control is designed to provide convenient and efficient control over your GoPro camera. This remote allows you to manage various camera functions, including power on/off, shooting modes, and quick access to preset sub-modes. It is compatible with GoPro Hero 8, Hero 9, Hero 10, Hero 11, Hero 12, Hero 13, and GoPro Max cameras. When paired with mobile phones, it supports photographing functions only.
Image: The TELESIN A10 Smart Wireless Bluetooth Remote Control, showing its compact design and display screen.
Obsah balení
Prosím, ověřte, zda jsou v balení přítomny všechny položky:
- 1 x Smart Bluetooth Remote
- 1 x řemínek na zápěstí
- 1 x Uživatelská příručka
- 1 x nabíjecí kabel
Nastavení a nabíjení
Nabíjení dálkového ovladače
The remote control features a Type-C charging port. A full charge takes approximately 2.5 hours and provides over 10 hours of battery life. The magnetic charging point is designed to be life waterproof and dust-proof, eliminating the need for additional protective covers during charging.
Image: Illustration of the TELESIN A10 remote charging, highlighting its 10-hour battery life.
Pairing with Your GoPro Camera
Follow these steps to pair your TELESIN A10 remote with your GoPro camera:
- Stiskněte a podržte Tlačítko nastavení on the remote for 3 seconds to enter pairing mode. All indicators on the remote will blink.
- On your GoPro camera, navigate to the pairing mode settings. This is typically found under Spojení > Připojte zařízení > Vzdálený.
- Wait for the pairing success notification to appear on your camera's screen.
- Stiskněte tlačítko Tlačítko nastavení on the remote again to exit pairing mode.
The remote is compatible with GoPro Hero 8, Hero 9, Hero 10, Hero 11, Hero 12, Hero 13, and GoPro Max. When pairing with a mobile phone, the remote only supports the photographing function.
Image: Visual representation of the TELESIN A10 remote's compatibility with various GoPro Hero models (Hero 8, 9, 10, 11, 12, MAX) and mobile phones.
Ovládání dálkového ovladače
Funkce tlačítek
The TELESIN A10 remote features four primary function buttons for easy control:
- Photo/Video Capture Button: Zahájí pořizování fotografií nebo nahrávání videa.
- Pairing and Preset Sub-mode Switching Button: Used for entering pairing mode and cycling through preset sub-modes.
- Mode Saving Button: Saves your most frequently used sub-mode as a shortcut for quick access.
- Power On/Off and Major Mode Switching Button: Powers the camera on or off and switches between major camera modes.
Image: Diagram illustrating the four function buttons on the TELESIN A10 remote control and their respective actions.
Controlling Multiple Cameras
The remote supports controlling up to five cameras simultaneously. This allows for synchronized operation across multiple GoPro devices. Poznámka: GoPro Hero 13 can only be controlled individually.
Image: Visual demonstrating the TELESIN A10 remote's ability to control up to five cameras simultaneously.
Režim zkratek
You can set your most frequently used sub-mode as a shortcut mode. This allows for quick activation with a single button press, enhancing efficiency during use.
Video ukázka
Video: This video demonstrates the TELESIN A10 remote control's functionality, including large mode switching, pattern collection, responsive low-latency control, and click-to-record actions with a GoPro camera.
Údržba
Voděodolnost
The TELESIN A10 remote control has an IP54 water resistance rating. This means it is resistant to splashes and light rain. It is not waterproof for underwater diving or prolonged submersion. Avoid immersing the remote completely in water to prevent damage.
Aktualizace firmwaru
The firmware of the remote control can be upgraded. Please refer to the official TELESIN website or support channels for information on available updates and instructions for performing upgrades.
Odstraňování problémů
- Remote not pairing with GoPro:
Ensure both the remote and the GoPro are in pairing mode. Check that the GoPro's Bluetooth is enabled. If issues persist, try restarting both devices and repeating the pairing process.
- Poor battery life in cold weather:
Lithium-ion batteries can experience reduced performance in cold temperatures. Keep the remote warm when not in use, or consider carrying a portable power bank for recharging in cold environments.
- GoPro not reconnecting after remote is out of range:
If the remote loses connection due to distance, the GoPro may not automatically reconnect. You may need to power cycle the GoPro (remove and reinsert the battery) to re-establish the connection.
- Dálkové ovládání nereaguje:
Check the remote's battery level. If the battery is low, recharge it. If fully charged, try restarting the remote by holding the power button or allowing the battery to drain completely and then recharging.
Specifikace
| Značka | TELESÍN |
| Název modelu | A10 |
| Technologie připojení | Bluetooth |
| Kompatibilní zařízení | GoPro Hero 8, 9, 10, 11, 12, 13, Max; Cell Phones (photographing function only) |
| Maximální počet podporovaných zařízení | 5 (GoPro Hero 13 supports individual control only) |
| Maximální dosah | 80 metrů |
| Kapacita baterie | 800 XNUMX mAh |
| Pracovní doba | 10 hodin |
| Doba nabíjení | 2.5 hodin |
| Voděodolnost | IP54 (splash and dust resistant, not for diving) |
Záruka a podpora
TELESIN provides customer support for any issues you may encounter with your A10 Smart Wireless Bluetooth Remote Control. If you are unhappy with your purchase for any reason, please contact their online customer support for assistance. They are committed to resolving problems quickly and efficiently.
For warranty claims or technical support, please visit the official TELESIN webwebu nebo se podívejte na kontaktní informace uvedené na obalu produktu.