Tyenaza ETCR2100A+ Digital Clamp Resistance Tester User Manual

1. Úvod

This manual provides essential instructions for the safe and effective operation of the Tyenaza ETCR2100A+ Digital Clamp Resistance Tester. This device is designed for accurate measurement of grounding resistance and circuit resistance, featuring a dustproof and shockproof structure for reliable performance in various industrial and departmental settings.

Please read this manual thoroughly before using the instrument to ensure proper handling and to prevent damage or injury.

Image 1.1: The Tyenaza ETCR2100A+ Digital Clamp Resistance Tester, showing its overall design with the clamp jaw and control panel.

2. Bezpečnostní informace

Always observe the following safety precautions to avoid electric shock, injury, or damage to the instrument:

• Nepoužívejte přístroj, pokud se jeví poškozený nebo pokud nefunguje abnormálně.
• Před použitím se ujistěte, že je přihrádka na baterie bezpečně uzavřena.
• Nepokoušejte se měřit napětí v obvodech nad stanovenou mezní hodnotou.tage limits (CAT III 150V).
• Avoid using the instrument in wet environments or during thunderstorms.
• Refer to qualified personnel for any repairs or servicing.
• Keep the instrument away from strong magnetic fields and electric fields exceeding specified limits.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• 1 x ETCR2100A+ Digital Clamp Odporový tester
• 1 x Accessory (likely a test ring or similar calibration aid)
• 1 x Uživatelská příručka (tento dokument)
• 1 x úložný box

Note: 1.5V AA batteries (x4) are required and are not included in the package.

Image 3.1: The ETCR2100A+ tester shown with a standard test ring, which is typically included as an accessory for calibration or verification.

4. Vlastnosti produktu

The ETCR2100A+ Digital Clamp Resistance Tester offers the following key features:

• Multifunkční displej: Resistance and current values are displayed simultaneously on a new black luxury screen.
• Vysoká přesnost: Microprocessor-controlled for precise grounding resistance detection, utilizing fast filtering technology to minimize interference.
• Správa dat: Features real-time clock, data storage for up to 99 sets, and data retrieval capabilities.
• Zvukový a vizuální alarm: "Beep beep beep" alarm sound with adjustable threshold settings for resistance (1-199 Ω) and current (1-499mA).
• Automatické funkce: Automatic shutdown and fully automatic gear shifting for ease of use.
• Robustní design: Shockproof and dustproof structure, suitable for demanding industrial environments.
• Široká aplikace: Ideal for telecommunications, power, meteorology, computer rooms, oil fields, power distribution lines, tower transmission lines, gas stations, factory grounding grids, and lightning rod systems.

Obrázek 4.1: Detailní záběr view of the robust clamp jaws, highlighting the double insulation and structural features designed for durability and safety.

5. Nastavení

5.1 Instalace baterie

The ETCR2100A+ requires four (4) 1.5V AA batteries (not included).

1. Locate the battery compartment cover on the back of the instrument.
2. Use a suitable tool (if necessary) to open the battery compartment.
3. Insert four 1.5V AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Bezpečně zavřete kryt bateriového prostoru.

5.2 Počáteční zapnutí

Po vložení baterie stiskněte tlačítko ON/OFF button to power on the device. The LCD display will illuminate, indicating the device is ready for use.

6. Návod k obsluze

6.1 Základní měření

To perform a grounding resistance test:

1. Ujistěte se, že je přístroj zapnutý.
2. Otevřete třamp čelisti stisknutím spouště.
3. Umístěte třamp around the grounding conductor or circuit to be measured. Ensure the jaws are fully closed around the conductor.
4. The resistance value will be displayed on the LCD screen. The device features fully automatic shifting.
5. The single measurement time is approximately 0.5 seconds.

Image 6.1: The ETCR2100A+ tester shown clamping an insulated ground wire, demonstrating its capability to accurately test even insulated conductors.

6.2 Single Point Grounding System, Auxiliary Measurement

For single point grounding systems where direct clamp measurement of the lead wire is not feasible, auxiliary methods can be used. The two-point method is illustrated below:

Image 6.2: Diagram showing the two-point method for auxiliary grounding resistance measurement. It depicts a grounding rod (RA) connected to a single point, with a wire extending to a natural grounding point (e.g., water pipe, buried metal) for measurement.

Chcete-li použít tuto metodu:

• Identify a natural grounding point with a low resistance value near the grounding point to be measured. Examples include a water pipe, fire hydrant, or other deeply buried metal structure.
• Connect a wire from the point to be measured to this auxiliary grounding point.
• Clamp the ETCR2100A+ around the connecting wire to perform the measurement.

Image 6.3: The ETCR2100A+ tester positioned in an industrial substation, illustrating a typical application environment for grounding resistance measurement.

6.3 Data Storage and Retrieval

The instrument can store up to 99 sets of measurement data.

• To store data: After a measurement, press the MEM button to save the current reading.
• To retrieve data: Press the MEM button repeatedly to cycle through stored data.

6.4 Funkce alarmu

The ETCR2100A+ features an audible and visual alarm for out-of-range measurements.

• To activate/deactivate the alarm: Press the AL tlačítko.
• To set alarm thresholds: Refer to the device's on-screen menu or specific instructions for setting resistance (1-199 Ω) and current (1-499mA) alarm limits.

Image 6.4: A hand holding the ETCR2100A+ tester, demonstrating its ergonomic design and ease of handling during operation.

7. Údržba

7.1 Čištění

Wipe the instrument's exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the device is powered off before cleaning.

7.2 Skladování

When not in use for extended periods, remove the batteries to prevent leakage. Store the instrument in its provided storage box in a cool, dry place, away from direct sunlight and extreme temperatures.

7.3 Kalibrace

Regular calibration by qualified personnel is recommended to maintain measurement accuracy, especially after prolonged use or if accuracy is suspected to be compromised.

8. Řešení problémů

9. Specifikace

10. Záruka a podpora

Pro informace o záruce, technickou podporu nebo servisní dotazy se prosím obraťte na svého prodejce nebo přímo na výrobce. Uschovejte si účtenku jako doklad o koupi.

Manufacturer: Tyenaza