Manuál pro výměnu LED pásku pro podsvícení televizoru DIREBECA 48"

Zavedení

This manual provides essential information for the replacement of LED backlight strips in compatible 48-inch televisions. These replacement strips are designed to restore the display's illumination, ensuring optimal viewing experience. Please read all instructions carefully before proceeding with installation.

Bezpečnostní informace

• Elektrické nebezpečí: Always disconnect the television from the power outlet before beginning any repair or replacement work.
• Doporučená profesionální instalace: Replacing TV backlight strips involves working with delicate electronic components and can be complex. It is highly recommended that this procedure be performed by a qualified technician.
• Zacházejte opatrně: LED strips are fragile. Avoid bending, twisting, or applying excessive pressure to the strips or individual LED beads.
• Statická elektřina: Take precautions against electrostatic discharge (ESD). Use an anti-static wrist strap and work on an anti-static mat if possible.
• Kompatibilita komponent: Ensure the replacement strips are compatible with your specific TV model. Refer to the model numbers provided.

Konec produktuview

The DIREBECA 48" TV LED backlight replacement set consists of multiple LED strips designed to illuminate the LCD panel from behind. Each strip contains multiple LED beads that emit light when powered.

Figure 1: Complete set of 8 LED backlight strips. These strips are typically installed horizontally across the back of the TV's LCD panel.

Obrázek 2: Detailní view of the individual LED beads on a single strip. Each strip features 5 LED beads, providing uniform illumination.

Figure 3: The reverse side of the LED strips, displaying model and part numbers such as TOT-48D2700-8X5-3030C-V3, crucial for compatibility verification.

Figure 4: An individual LED backlight strip, demonstrating its slender profile and connection points. The length of each strip is approximately 490mm.

Nastavení a instalace

Vyloučení odpovědnosti: This section provides general guidance. Specific disassembly and reassembly procedures vary significantly between TV models. Always consult your TV's service manual or seek professional assistance.

1. Příprava:
   • Odpojte televizor od všech zdrojů napájení a externích zařízení.
   • Place the TV face down on a soft, clean, and stable surface to prevent screen damage.
   • Gather necessary tools: screwdrivers, plastic prying tools, anti-static wrist strap.
2. Demontáž:
   • Carefully remove the TV's back cover.
   • Disconnect all cables and ribbons connected to the main board and power supply board.
   • Remove the internal components (main board, power supply, speakers, etc.) to access the LCD panel.
   • Extreme caution is required when removing the LCD panel and diffuser layers. These components are very fragile.
3. Výměna LED pásku:
   • Locate the old LED backlight strips. They are usually adhered to the metal chassis.
   • Gently peel off the old strips, ensuring no residue is left behind.
   • Vyčistěte povrch, na který budou umístěny nové pásky.
   • Carefully align and adhere the new LED strips (1 set = 8 pieces) in their correct positions. Ensure all connectors are properly aligned.
   • Connect the new LED strips to the power supply board.
4. Testování:
   • Before reassembling the entire TV, temporarily connect the power supply and main board.
   • Plug in the TV and power it on briefly to confirm the new LED strips illuminate correctly and uniformly. Immediately power off and disconnect.
5. Opětovná montáž:
   • Carefully reassemble the diffuser layers and LCD panel, ensuring no dust or fingerprints are trapped.
   • Reinstall all internal components and reconnect all cables.
   • Replace the TV's back cover and secure all screws.

Provozní

Once the DIREBECA LED backlight strips are correctly installed and the television is fully reassembled, the operation of the backlight system is integrated with the TV's normal functions. The backlight will illuminate automatically when the TV is powered on, providing the necessary light for the display. No separate operation or control is required for the backlight strips themselves.

Údržba

These LED backlight strips are designed to be maintenance-free once installed. However, proper handling during installation and general care for your television will prolong their lifespan:

• Prevence prachu: Keep the TV's internal components free from dust accumulation, which can lead to overheating. Ensure the TV's ventilation openings are clear.
• Ovládání teploty: Avoid exposing the TV to extreme temperatures or direct sunlight, which can degrade electronic components over time.
• Jemné zacházení: If the TV needs to be moved, do so carefully to avoid internal component shifts or damage.

Odstraňování problémů

If you encounter issues after replacing the LED backlight strips, consider the following:

• No Backlight / Dark Screen:
  • Verify all LED strip connectors are securely seated on the power supply board.
  • Check for any visible damage to the new LED strips (e.g., bent or broken LEDs).
  • Ensure the power supply board is functioning correctly. A faulty power supply board can prevent the backlights from illuminating.
  • Confirm the TV's main board is sending the correct signals to the power supply board.
• Nerovnoměrný jas / tmavé skvrny:
  • Check if all LED strips are properly aligned and fully adhered to the chassis.
  • Inspect individual LED beads for any non-illuminating or dim LEDs.
  • Ensure the diffuser sheets and LCD panel are reinstalled correctly and without any foreign objects or misalignment.
• Blikající podsvícení:
  • This could indicate a loose connection or a faulty LED strip. Recheck all connections.
  • A failing power supply board or LED driver circuit can also cause flickering.

Pokud kroky k řešení problému nepomohou vyřešit, doporučuje se profesionální diagnostika a oprava.

Specifikace

Záruka a podpora

As these are replacement components, warranty terms may vary depending on the retailer and specific purchase conditions. Please refer to your purchase receipt or contact the seller directly for information regarding warranty coverage and return policies.

For technical support or complex installation queries, it is advisable to consult with a professional TV repair technician or contact the original TV manufacturer's support channels, as this product is a component for repair rather than a standalone device.