Waveshare Solar Power Manager (D)

Waveshare Solar Power Manager Module (D) Instruction Manual

Model: Solar Power Manager (D)

1. Konec produktuview

The Waveshare Solar Power Manager Module (D) is a compact and efficient solar charge controller designed for various low-power applications. It facilitates the charging of 3.7V rechargeable Li-ion batteries using either a 6V-24V solar panel or a Type-C power adapter. The module provides a stable 5V/3A regulated output, making it suitable for powering microcontrollers, development boards, and IoT devices.

Equipped with MPPT (Maximum Power Point Tracking) functionality, it optimizes the power extraction from solar panels under varying light conditions. It also integrates multiple protection circuits to ensure safe and reliable operation, including safeguards against over-charge, over-discharge, overheat, and over-current conditions.

Waveshare Solar Power Manager Module (D) with green screw terminals and Type-C port

Image: Waveshare Solar Power Manager Module (D) highlighting its compact design and various connection points.

2. Obsah balení

Ověřte prosím, zda jsou ve vašem balení obsaženy všechny níže uvedené položky:

  • 1x Solar Power Manager (D) module
  • 1x Screws pack
Package contents showing the Solar Power Manager (D) module and a pack of screws

Image: Contents of the package, including the Solar Power Manager (D) module and mounting screws.

3. Klíčové vlastnosti

  • Funkce MPPT: Supports Maximum Power Point Tracking to maximize solar panel efficiency.
  • Dual Charging Input: Compatible with 6V~24V solar panels and Type-C power adapters for battery charging.
  • Self-Adaptive Input Voltage: Automatically adjusts to input voltage from 6V~24V solar panels via DC-002 jack or screw terminal.
  • Ochrana proti zpětnému chodu vstupu: Prevents damage from incorrect solar panel input polarity.
  • Regulovaný výstup: Provides a stable 5V/3A output for connected devices.
  • Multi LED Indicators: Visual feedback for monitoring solar panel and battery status.
  • Komplexní ochranné obvody: Includes safeguards against over-charge, over-discharge, overheat, and over-current to ensure stable and safe operation.

4. Nastavení a připojení

Before connecting any components, ensure the module is placed on a stable, non-conductive surface. Refer to the diagram below for connection points.

Detailed diagram of the Solar Power Manager (D) module showing numbered components and their functions

Image: Detailed component layout and connection points of the Solar Power Manager (D) module.

4.1 Identifikace součásti

  1. Solar panel charging input: Connect your 6V-24V solar panel here via DC-002 jack or screw terminal.
  2. Nabíjecí vstup typu C: Connect a 5V power adapter via Type-C connector for charging or use as a 5V output for external devices.
  3. Výkon: 5V/3A output via screw terminal for powering external devices.
  4. BATT interfaces: Connect a 3.7V rechargeable Li-ion battery via screw terminal or PH2.0 4P connector.
  5. SW6106: USB power management chip for USB charging and 5V/3A boost output.
  6. CN3791: Solar power management chip for solar panel charging and buck input.
  7. XB8886A: Li-ion battery over-charge / over-discharge protection chip.
  8. BATT capacity indicators: LEDs indicating battery charge level.
  9. Indikátory nabíjení solárních panelů: LEDs indicating solar charging status.
  10. Anti-reverse MOS tube: Prevents reverse battery connection damage.

4.2 Postup připojení

  1. Připojte baterii: Connect a 3.7V rechargeable Li-ion battery to the BATT interfaces (4). Ensure correct polarity. The module does not include a battery holder, so batteries must be purchased separately.
  2. Connect Solar Panel (Optional): Connect a 6V-24V solar panel to the Solar panel charging input (1). The module supports self-adaptive input voltage.
  3. Connect Type-C Power Adapter (Optional): Alternatively, or in addition to solar, connect a 5V Type-C power adapter to the Type-C charging input (2) for battery charging.
  4. Připojení zátěže: Connect your 5V device to the Power output (3) screw terminal. Ensure the device's current draw does not exceed 3A.

Důležité: Always ensure correct polarity for all connections to prevent damage to the module and connected devices.

5. Návod k obsluze

5.1 Nabíjení baterie

  • Solární nabíjení: When a solar panel is connected and exposed to sufficient sunlight, the module will automatically begin charging the connected 3.7V Li-ion battery. The "Charge" LED (part of Solar panel charging indicators, 9) will illuminate. Once the battery is fully charged, the "Done" LED will light up.
  • Nabíjení typu C: Connect a 5V Type-C power adapter to the Type-C input (2). The module will charge the battery. The BATT capacity indicators (8) will show the charging progress.

5.2 Powering External Devices

  • The module provides a regulated 5V/3A output via the screw terminal (3). Connect your 5V device to this output.
  • The Type-C port (2) can also function as a 5V output for external devices when not used for charging.

5.3 LED indikátory

  • BATT Capacity Indicators (8): These LEDs light up when the battery is charging or under load. They will turn off approximately 30 seconds after the load is removed.
  • Solar Panel Charging Indicators (9):
    • Účtovat: Illuminates when the solar panel is actively charging the battery.
    • Hotovo: Illuminates when the battery is fully charged by the solar panel.

6. Údržba

  • Čištění: Udržujte modul čistý a bez prachu a nečistot. K čištění používejte měkký, suchý hadřík. Nepoužívejte tekutiny ani abrazivní čisticí prostředky.
  • Spojení: Periodically check all screw terminal connections to ensure they are secure. Loose connections can lead to poor performance or damage.
  • Prostředí: Operate the module within its specified temperature range. Avoid exposure to extreme heat, cold, or high humidity.
  • Stav baterie: If using rechargeable batteries, follow the manufacturer's guidelines for battery care to maximize lifespan.

7. Řešení problémů

ProblémMožná příčinaŘešení
No power output (5V/3A)
  • No battery connected or battery discharged.
  • Solar panel not connected or insufficient light.
  • Type-C power adapter not connected or faulty.
  • Load exceeds 3A.
  • Ensure a charged 3.7V Li-ion battery is connected.
  • Verify solar panel connection and expose to direct sunlight.
  • Check Type-C power adapter connection and functionality.
  • Reduce the load connected to the 5V output.
Baterie se nenabíjí
  • Nesprávná polarita baterie.
  • Solární panel objtage outside 6V-24V range.
  • Insufficient solar light or faulty solar panel.
  • Faulty Type-C power adapter.
  • Znovu zkontrolujte polaritu baterie.
  • Ensure solar panel output voltage je v rozmezí 6V-24V.
  • Place solar panel in direct sunlight; test with another panel if possible.
  • Test Type-C power adapter with another device.
LED indikátory nefungují
  • No power input (solar or Type-C).
  • Není připojena baterie.
  • Verify power input from solar panel or Type-C adapter.
  • Ensure a 3.7V Li-ion battery is properly connected.

8. Specifikace

FunkceSpecifikace
Solární vstup Voltage6V ~ 24V (self-adaptive)
Vstupní objem typu Ctage5V
Regulovaný výstup5V / 3A
Typ baterie3.7V rechargeable Li-ion battery (not included)
Recharging Cutoff Voltage4.2 V ± 1%
Over Discharging Protection Voltage3.0 V ± 1%
Speciální funkceMPPT function, self-adaptive input voltage, multiple protection circuits
Rozměry (D x Š x V)45.0 mm x 40.0 mm x 10.1 mm
Quiescent Current (Max)<30 mA

Poznámka: Specifikace se mohou změnit bez předchozího upozornění.

9. Informace o záruce

Waveshare products are typically covered by a limited warranty. For detailed information regarding the warranty period, terms, and conditions applicable to your Solar Power Manager Module (D), please refer to the official Waveshare webnebo se obraťte na prodejce, od kterého jste produkt zakoupili. Uschovejte si doklad o koupi pro případ reklamace.

10. Podpora

For technical assistance, product documentation, or further inquiries, please visit the official Waveshare support resources:

  • Oficiální web Waveshare Webmísto: www.waveshare.com (Check for product-specific documentation, forums, and contact information.)
  • Podpora prodejců: Contact the vendor or online store where you purchased the module for direct support.

When contacting support, please have your product model (Solar Power Manager (D)) and any relevant purchase details ready.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.