FREDEES Smart LED Night Stand

1. Důležité bezpečnostní pokyny

Před montáží a použitím si prosím přečtěte a pochopte všechny pokyny. Uschovejte si tento návod pro budoucí použití.

• Před montáží se ujistěte, že jsou všechny součásti přítomny a nepoškozené.
• Do not overtighten screws during assembly to prevent damage to the material.
• Place the night stand on a flat, stable surface to prevent tipping.
• Do not exceed the weight capacity of the tabletop (50 lbs) or drawers/shelf (30 lbs).
• Keep liquids away from the charging station and power outlets to prevent electrical hazards.
• Unplug the power cord from the wall outlet before cleaning or moving the unit.
• Do not attempt to modify or repair the electrical components. Contact customer support for assistance.

2. Obsah balení

Verify that all parts listed below are included in your package. If any parts are missing or damaged, please contact customer service.

• Horní panel
• Boční panely (2)
• zadní panel
• Čela zásuvek (2)
• Drawer Sides & Backs
• Dna zásuvek
• Panel police
• Nohy (4)
• Charging Station Unit (pre-installed or separate)
• LED Light Strip with Human Sensor
• Hardware Kit (screws, dowels, drawer slides, handles, etc.)
• Návod k použití

3. Montážní návod

Follow these steps carefully for proper assembly. Each part is labeled with a number for easy identification.

1. Rozbalte a identifikujte: Lay out all components on a clean, soft surface. Identify each part using the labels and the parts list.
2. Sestavte rám: Attach the side panels to the bottom panel and back panel using the provided screws and dowels.
3. Instalovat poličku: Insert the shelf panel into the designated slots or attach with screws.
4. Sestavení zásuvek: Construct the two drawers by attaching the sides, back, and bottom to the drawer front. Install drawer slides.
5. Vložte zásuvky: Carefully slide the assembled drawers into the frame.
6. Připevněte horní panel: Připevněte horní panel k sestavenému rámu.
7. Instalace nohou: Attach the four legs to the bottom of the night stand.
8. Připojení elektrických komponent: If the charging station and LED light strip are not pre-installed, follow the specific instructions provided in the hardware kit to secure them and connect the necessary wiring. Ensure all connections are firm.
9. Závěrečná kontrola: Ensure all screws are tightened and the night stand is stable.

Obrázek 3.1: Product dimensions and weight capacities for tabletop, shelf, and drawers. Dimensions are 15.75"D x 17.72"W x 23.62"H. Tabletop capacity is 50 lbs, shelf/drawer capacity is 30 lbs.

4. Návod k obsluze

4.1 LED osvětlovací systém

The night stand features an integrated LED light strip with three color modes and a human sensor.

• Zapnutí/vypnutí: Locate the control button for the LED lights. A short press typically turns the lights on or off.
• Změnit barevný režim: With the lights on, short press the control button repeatedly to cycle through the three available color modes: White light, Warm light, and Cold light.
• Upravit jas: To adjust brightness (0-100%), press and hold the control button. The brightness will cycle up or down. Release the button when the desired brightness is reached.
• Human Sensor Function: The integrated human body sensor automatically activates the LED lights when motion is detected within 2-3 meters. The lights will turn off after a period of inactivity. This feature provides convenient illumination without manual operation.

Obrázek 4.1: Illustration of the three LED light modes (White, Warm, Cold) and the brightness adjustment range from 0% to 100% by pressing and holding the control button.

Obrázek 4.2: Depiction of the human sensor's operation, showing it detects movement within a 2-3 meter range to automatically illuminate the night stand.

Nabíjecí stanice 4.2

Integrovaná nabíjecí stanice poskytuje pohodlný přístup k napájení vašich elektronických zařízení.

• Připojení napájení: Ensure the night stand's main power cord is securely plugged into a standard 120V/12A wall outlet.
• USB porty: Use the 1 x USB-A port (5V/2A) to charge compatible devices such as smartphones, tablets, or other USB-powered accessories.
• Port typu C: Use the 1 x Type-C port (5V/2A) for devices that utilize a USB-C connection.
• AC zásuvky: The 2 x standard AC power outlets (120V/12A) can be used for larger electronics like laptops, lamps, or other appliances.
• Správa kabelů: Route charging cables neatly to avoid clutter and potential hazards.

Obrázek 4.3: Detailní view of the charging station, highlighting the 1 USB port, 1 Type-C port, and 2 AC power outlets, along with their respective power specifications.

5. Údržba

Proper care will extend the life and appearance of your night stand.

• Čištění: Otřete povrchy měkkým, damp hadříkem. Nepoužívejte agresivní chemikálie nebo abrazivní čisticí prostředky, které mohou poškodit povrchovou úpravu.
• Utírat prach: Regularly dust the night stand, especially around the charging ports and LED light area, to prevent dust buildup.
• Rozlití: Immediately wipe up any spills to prevent moisture damage to the wood and electrical components.
• Elektrické komponenty: Ensure the charging station and LED lights remain dry. Do not immerse in water.
• Utáhněte upevňovací prvky: Pravidelně kontrolujte a utahujte všechny šrouby a upevňovací prvky, abyste zachovali strukturální integritu.

6. Řešení problémů

V této části naleznete běžné problémy a jejich řešení.

7. Specifikace

• Značka: FREDEES
• Model: Smart LED Night Stand
• Rozměry produktu: 15.74"H x 17.71"Š x 23.62"V
• Barva: White (Farmhouse Style)
• Tabletop Weight Capacity: 50 liber
• Shelf/Drawer Weight Capacity: 30 liber
• LED světla: 3 Color Modes (White, Warm, Cold), 0-100% Brightness Adjustable
• Human Sensor Range: 2-3 metry
• Nabíjecí stanice:
  • 1 x USB Port (5V/2A)
  • 1 x Type-C Port (5V/2A)
  • 2 x AC Power Outlets (120V/12A)
• Délka napájecího kabelu: 4.92 FT

8. Záruka a podpora

For warranty information, product support, or to report missing/damaged parts, please contact FREDEES customer service through the retailer where the product was purchased. Please have your purchase receipt and product model number (B0CSPDVKVP) available when contacting support.