DCH CS-CNS990VX
DCH 2600mAh Battery Replacement User Manual
Model: CS-CNS990VX
Zavedení
This manual provides essential information for the safe and effective use of your DCH 2600mAh Li-ion battery replacement. This battery is specifically designed for use with CECOTEC Conga 950 Excellence and Conga 990 robotic vacuum cleaners. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your battery.
Důležité bezpečnostní informace
Always observe the following safety precautions to prevent injury or damage to the battery and device:
- POZOR: Nepokoušejte se bateriový blok rozebírat, otevírat ani opravovat.
- Replace only with the battery pack designated for this product (Part No: CONG1002).
- Nedrťte, nepropichujte, nezkratujte vnější kontakty a nevhazujte do ohně nebo vody.
- Neskladujte při teplotě nad 60 °C (140 °F).
- Udržujte baterii mimo dosah dětí.
- Použité baterie zlikvidujte v souladu s místními předpisy.
Konec produktuview

Obrázek 1: Přední strana view of the DCH replacement battery, highlighting its compact design and connector.

Obrázek 2: Nahoře view of the battery, displaying the detailed product label with specifications and safety warnings.

Figure 3: Detail of the battery's connector, ensuring proper fit with compatible devices.
Kompatibilita
This DCH replacement battery is compatible with the following CECOTEC Conga robotic vacuum cleaner models:
- CECOTEC Conga 950 Excellence
- CECOTEC Conga 990
The compatible battery part number is CONG1002.
Please verify your device model and existing battery part number before installation to ensure compatibility.
Nastavení a instalace
Replacing the battery in your robotic vacuum cleaner typically involves the following steps. Always refer to your specific vacuum cleaner's user manual for detailed, model-specific instructions.
- Vypnout: Ensure your robotic vacuum cleaner is completely powered off and disconnected from its charging base or power adapter.
- Přístup k bateriovému prostoru: Locate the battery compartment on the underside of your vacuum cleaner. This usually requires removing a cover or a few screws.
- Vyjměte starou baterii: Carefully disconnect the old battery's connector from the vacuum cleaner's port. Remove the old battery from its compartment.
- Nainstalujte novou baterii: Insert the new DCH replacement battery into the compartment, ensuring it fits securely. Connect the battery's plug firmly into the vacuum cleaner's port.
- Bezpečná přihrádka: Replace the battery compartment cover and secure any screws that were removed.
- Počáteční poplatek: Place the vacuum cleaner back on its charging base or connect it to its power adapter. Allow the new battery to fully charge before its first use. This may take several hours.
Poznámka: For optimal performance, it is recommended to fully charge and discharge the new battery 2-3 times after installation.
Provozní směrnice
Once installed, the DCH replacement battery operates seamlessly with your compatible CECOTEC Conga robotic vacuum cleaner. The vacuum cleaner's internal system will manage the battery's charging and discharging cycles.
- Nabíjení: Always charge the battery using the original charging base or power adapter provided with your robotic vacuum cleaner.
- Vybíjení: Allow the vacuum cleaner to operate until the battery is low or depleted before recharging, especially during the initial cycles.
- Skladování: If the vacuum cleaner will not be used for an extended period, it is recommended to fully charge the battery and then store the device in a cool, dry place. Recharge the battery every 3-6 months to maintain its health.
Údržba
Proper maintenance can extend the lifespan of your DCH replacement battery:
- Pravidelné používání: Use your robotic vacuum cleaner regularly to keep the battery active.
- Vyhněte se extrémním teplotám: Do not expose the battery or the vacuum cleaner to extreme heat or cold.
- Vyčistit kontakty: Periodically check and clean the charging contacts on both the vacuum cleaner and the charging base to ensure a good connection.
- Správná likvidace: When the battery reaches the end of its life, dispose of it responsibly according to local regulations for Li-ion batteries. Do not dispose of in household waste.
Odstraňování problémů
If you encounter issues with your DCH replacement battery, consider the following common solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Baterie se nenabíjí | Loose connection, dirty charging contacts, faulty charger/base | Ensure battery is properly connected. Clean charging contacts on vacuum and base. Test with a known good charger/base if possible. |
| Krátká doba běhu | Battery not fully charged, battery degradation, high power consumption by vacuum | Ensure full charge cycles. Perform 2-3 full charge/discharge cycles. Check vacuum for blockages or issues increasing power draw. |
| Vysavač se nezapíná | Battery not installed correctly, battery completely depleted, vacuum fault | Re-install battery, ensuring secure connection. Place on charger for several hours. Consult your vacuum cleaner's manual for device-specific troubleshooting. |
If problems persist, please contact customer support as detailed in the "Warranty and Support" section.
Specifikace
| Atribut | Detail |
|---|---|
| Číslo modelu | CS-CNS990VX |
| Číslo dílu baterie | CONG1002 |
| Typ baterie | Li-ion (lithium-iontová) |
| Kapacita | 2600 XNUMX mAh |
| Watt-hodiny (Wh) | 37.44 Wh |
| svtage | 14.4V |
| Rozměry (D x Š x V) | 69.5 x 37.0 x 37.0mm (2.74 x 1.46 x 1.46 palce) |
| Hmotnost | 270.0 g (9.5 uncí) |
| Výrobce | DCH |
| Doporučená použití | Indoor/Outdoor (for compatible robotic vacuums) |
Záruka a podpora
For any questions regarding your DCH 2600mAh replacement battery, including pre-sales inquiries or after-sales service, please feel free to contact us.
You may also find additional information and support resources on the manufacturer's related webmísto: www.cameronsino.com
Uschovejte si prosím doklad o koupi pro uplatnění záruky.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.