Nilfisk Advance SC450

Nilfisk Advance SC450 Walk-Behind Automatic Scrubber Instruction Manual

Model: SC450 | Manufacturer: Nilfisk Advance

1. Úvod

This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of the Nilfisk Advance SC450 Walk-Behind Automatic Scrubber. The SC450 is a compact, battery-powered machine designed for daily cleaning tasks in various environments, including hospitals, schools, manufacturing plants, and warehouses. Its design prioritizes productivity, reliable operation, and ease of maintenance.

Nilfisk Advance SC450 Walk-Behind Automatic Scrubber

Obrázek 1: Přesview of the Nilfisk Advance SC450 Automatic Scrubber. This image displays the complete unit from a front-side angle, highlighting its compact design and the scrubbing brush assembly.

2. Bezpečnostní informace

Always read and understand all safety warnings and instructions before operating the Nilfisk Advance SC450. Failure to follow these instructions may result in serious injury or damage to the equipment.

  • Školení operátorů: Tento stroj by měl obsluhovat pouze vyškolený a autorizovaný personál.
  • Osobní ochranné prostředky (OOP): Wear appropriate PPE, such as non-slip footwear and eye protection, when operating or maintaining the scrubber.
  • Elektrická bezpečnost: Ensure the battery charger is connected to a grounded outlet. Do not operate the machine with damaged electrical components.
  • Manipulace s chemikáliemi: Use only recommended cleaning solutions. Follow manufacturer's instructions for chemical dilution and handling.
  • Stabilita stroje: Do not operate on excessively steep inclines. Ensure the machine is stable before performing any maintenance.
  • Nouzové zastavení: Seznamte se s umístěním a obsluhou ovladače nouzového zastavení.
  • Hladina hluku: The machine operates at 68 dB(A). While designed for low noise, prolonged exposure may require hearing protection in certain environments.

3. Nastavení a počáteční příprava

3.1 Vybalení a kontrola

Carefully remove the scrubber from its packaging. Inspect the machine for any signs of shipping damage. Report any damage to your supplier immediately.

3.2 Instalace a nabíjení baterie

The SC450 uses two 105 Ah wet batteries (part number 56206962).

  1. Otevřete přihrádku na baterie.
  2. Carefully place the batteries into the compartment, ensuring correct polarity when connecting the terminals.
  3. Bezpečně uzavřete přihrádku na baterie.
  4. Connect the onboard battery charger (115 VAC / 24 VDC) to a suitable power outlet. Allow the batteries to fully charge before first use. Refer to the battery manufacturer's instructions for specific charging guidelines.

3.3 Instalace kartáče

The scrubber is equipped with a 20-inch (51 cm) disc brush, typically a Prolene brush (part number L08837025).

  1. Ensure the machine is turned off and the key is removed.
  2. Tilt the machine back to access the brush deck.
  3. Align the brush with the drive hub and push upwards until it locks into place.
  4. Gently lower the machine.
Zadní view of Nilfisk Advance SC450 showing controls and squeegee assembly

Obrázek 2: Zadní view of the SC450. This image shows the control panel, handle, and the squeegee assembly at the back of the machine, which is crucial for water recovery.

4. Návod k obsluze

4.1 Plnění nádrže na roztok

The solution tank has a capacity of 10.5 gallons (39.75 liters).

  1. Open the solution tank fill port.
  2. Pour the recommended cleaning solution, diluted according to the manufacturer's instructions, into the tank. Do not overfill.
  3. Securely close the fill port.

4.2 Spuštění stroje

  1. Vložte klíč do zapalování a otočte jím do polohy „ON“.
  2. Engage the brush motor and solution flow controls as needed for the cleaning task.
  3. Lower the squeegee assembly to ensure proper water recovery.
Operator pushing Nilfisk Advance SC450 scrubber

Figure 3: Operator demonstrating the walk-behind operation of the SC450. This image illustrates the ergonomic handle and the machine's maneuverability during use.

4.3 Scrubbing Process

Walk behind the machine at a steady pace, guiding it over the area to be cleaned. The SC450's low noise level (68 dB(A)) allows for daytime cleaning without significant disruption. The automatic squeegee release mechanism helps prevent damage if the squeegee encounters obstacles, extending its lifespan.

4.4 Vyprázdnění sběrné nádrže

The recovery tank has a capacity of 11.9 gallons (45.05 liters). Empty the recovery tank after each use or when it is full.

  1. Vypněte stroj a vyjměte klíč.
  2. Locate the drain hose at the rear of the machine.
  3. Direct the drain hose into a suitable drain or disposal area.
  4. Remove the cap from the drain hose to allow the dirty water to flow out.
  5. Once empty, replace the cap and secure the drain hose.
Hand holding drain hose from Nilfisk Advance SC450

Figure 4: Detail of the recovery tank drain hose. This image shows a hand holding the drain hose, illustrating the process of emptying the dirty water from the recovery tank.

5. Údržba

Regular maintenance ensures the longevity and optimal performance of your Nilfisk Advance SC450.

5.1 Denní údržba

  • Clean Recovery Tank: After emptying, rinse the recovery tank thoroughly. The large recovery tank and removable lid facilitate easy cleaning.
  • Clean Solution Tank: Rinse the solution tank to prevent chemical buildup.
  • Inspect Squeegee Blades: Check for wear or damage. Clean any debris from the blades.
  • Inspect Brush/Pad: Remove any debris from the brush or pad. Replace if worn.
  • Otřete stroj: Vyčistěte vnější část stroje reklamouamp cloth. The polyethylene corrosion-proof rotomolded tank is designed for durability and easy cleaning.

5.2 Péče o baterii

  • Dobíjení: Always recharge batteries after each use to maximize their lifespan.
  • Water Levels (Wet Batteries): Periodically check the water levels in the wet batteries and top up with distilled water as needed, following battery manufacturer guidelines.
  • Čisté terminály: Udržujte kontakty baterie čisté a bez koroze.

6. Řešení problémů

Tato část obsahuje řešení běžných provozních problémů. V případě problémů, které zde nejsou uvedeny, kontaktujte zákaznickou podporu.

ProblémMožná příčinaŘešení
Stroj se nespustí
  • Baterie je vybitá
  • Key not fully inserted/turned
  • Nouzové zastavení zapnuto
  • Nabijte baterie
  • Ensure key is in "ON" position
  • Disengage emergency stop button
Špatné nasávání vody
  • Squeegee blades worn or damaged
  • Sběrná nádrž je plná
  • Hadice vysavače je ucpaná
  • Vyměňte stěrače
  • Vyprázdněte sběrnou nádrž
  • Clear vacuum hose obstruction
No solution flow
  • Prázdná nádrž na roztok
  • Solution filter clogged
  • Naplňte nádrž na roztok
  • Vyčistěte filtr roztoku

7. Technické specifikace

FunkceSpecifikace
ModelSC450
Číslo dílu56383128
svtage24 V
Motor kartáče480 W
Výkon vakuového motoru330 W
Scrubbing Width20 palců (50.8 cm)
Rychlost štětce154 ot./min
Tlak štětce66 lb (29.94 kg)
Šířka stěrky30 palců (76.2 cm)
Kapacita nádrže na roztok10.5 litrů
Kapacita regenerační nádrže11.9 litrů
Maximální doba provozu140 min
Hladina akustického tlaku68 dB(A)
Maximální rychlost3 mph (4.83 km/h)
Hmotnost s bateriemi285 lb (129.27 kg)
Rozměry (D x Š x V)46.2 palců x 22 palců x 38.6 palců (117.35 cm x 55.88 cm x 98.04 cm)
Třída ochrany IPIPX4
Zahrnuté komponenty105 Ah Wet Batteries, Prolene Brush

8. Zákaznická podpora a záruka

For technical assistance, spare parts, or warranty inquiries, please contact your authorized Nilfisk Advance dealer or customer support.

While specific warranty details are not provided in this manual, it is recommended to retain your purchase receipt and consult with the seller or manufacturer for warranty terms and conditions. Extended protection plans may also be available from your retailer.

© 2024 Nilfisk Advance. All rights reserved.

Související dokumenty - SC450

Předview Nilfisk-Advance SC450 Service Manual
This official service manual for the Nilfisk-Advance SC450 industrial floor scrubber provides detailed instructions for maintenance, repair, troubleshooting, and technical specifications to ensure optimal performance and longevity.
Předview Nilfisk-Advance Adgressor BR 850S/1050S Service Manual
This comprehensive service manual provides in-depth technical guidance, maintenance procedures, and troubleshooting information for the Nilfisk-Advance Adgressor BR 850S and BR 1050S rider scrubbers, including AXP, EDS, and EcoFlex variants.
Předview Nilfisk Advance SC500 Floor Scrubber Service Manual
Comprehensive service manual for the Nilfisk Advance SC500 floor scrubber. Includes technical specifications, maintenance procedures, wiring diagrams, and troubleshooting guides for service technicians.
Předview Nilfisk-Advance SC500 Service Manual: Industrial Floor Scrubber Maintenance and Repair
Comprehensive service manual for the Nilfisk-Advance SC500 industrial floor scrubber. Covers maintenance, repair, technical specifications, and troubleshooting for models including 9087361020, 9087353020, 9087350020, and 9087351020.
Předview Podlahové čističe Nilfisk-Advance Pacesetter: Návod k použití, bezpečnost a specifikace
Komplexní uživatelská příručka pro podlahové vysavače Nilfisk-Advance Pacesetter (modely 13, 17, 20, 17HD, 20HD, 20TS, 20SD). Obsahuje bezpečnostní pokyny, návod k obsluze, pokyny k řešení problémů, postupy uzemnění a technické specifikace.
Předview Servisní manuál k Advance 7765 / Nilfisk CR1500: Průvodce údržbou a opravami
Komplexní servisní manuál pro průmyslové zametací/podrývací stroje Advance 7765 a Nilfisk CR1500. Zahrnuje údržbu, řešení problémů, technické specifikace a postupy oprav.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.