Fractal Design Meshify 3 Ambience Pro RGB Computer Case Instruction Manual

1. Úvod

The Fractal Design Meshify 3 Ambience Pro RGB is a high-performance PC case designed for optimal cooling and a fluid, aerodynamic aesthetic. This model features advanced ARGB Gen 2 integrated atmospheric lighting and powerful Momentum fans, all controllable via the intuitive web-based Adjust Pro Hub. This manual provides detailed instructions for setting up, operating, and maintaining your computer case to ensure the best possible experience.

Obrázek 1: Přední strana view of the Fractal Design Meshify 3 Ambience Pro RGB computer case.

2. Nastavení

2.1 Rozměry pouzdra

The Meshify 3 Ambience Pro RGB has dimensions of 423mm (height) x 229mm (width) x 507mm (depth). It is classified as a compact mid-tower case, designed to offer ample internal space without occupying excessive desk area.

2.2 Panel Removal and Access

2.2.1 Přední panel

To remove the front mesh panel, gently pull it upwards from the bottom. The panel detaches easily, allowing access to the front fans. The RGB lighting on the front panel is connected via pogo-style pins, which automatically disconnect when the panel is removed and reconnect when reattached.

Obrázek 2: Přední strana view of the Meshify 3 case, highlighting the iconic mesh design and RGB fans.

2.2.2 Horní panel

The top panel is ventilated and can be removed by pulling the tab located at the rear. This provides access to the top cooling bracket for installation or cleaning. The top cooling bracket is fully removable by unscrewing two thumb screws, supporting up to 2x 120mm or 140mm fans, or radiators up to 280mm.

Obrázek 3: Shora dolů view showing the front I/O ports and the ventilated top panel of the Meshify 3.

2.2.3 boční panely

The main side panel features tempered glass, allowing visibility of internal components. It is removed by pulling a tab at the top, and it will detach completely, so ensure a firm grip. The opposite side panel is a solid white steel panel, removed using the same locking mechanism.

Obrázek 4: Strana view of the Meshify 3 case with its tempered glass panel, showcasinvnitřní součásti.

2.3 Instalace komponent

2.3.1 Motherboard Compatibility

The Meshify 3 supports Mini-ITX, Micro-ATX, ATX, and Extended ATX motherboards up to 277mm in width.

2.3.2 Graphics Card (GPU)

This case supports graphics cards up to 349mm in length. An internal air guide directs airflow directly towards the GPU for improved cooling.

Obrázek 5: Interiér view of the Meshify 3, showing the installed GPU and the air guide for enhanced cooling.

2.3.3 Napájecí jednotka (PSU)

The PSU is mounted at the bottom of the case. The maximum supported PSU length is 180mm.

2.3.4 Úložné jednotky

The case includes two 2.5"/3.5" storage brackets and two additional 2.5" SSD mounts near the power supply, allowing for a total of six storage drives. The brackets are two-piece designs, allowing for flexible configuration to accommodate either 2.5" SSDs or 3.5" HDDs.

Obrázek 6: Zadní interiér view of the Meshify 3, detailing the storage drive mounts and cable management features.

2.4 Správa kabelů

The Meshify 3 features new cable aligners and Velcro ties on the backside of the motherboard tray to simplify cable routing and ensure a clean build. Built-in cable covers towards the front of the case also contribute to a tidy interior.

3. Návod k obsluze

3.1 Přední I/O porty

The top front of the case provides convenient access to:

• Large Power Button
• 2x porty USB 3.0 typu A
• 1x USB 3.2 Gen 2x2 Type-C Port
• 1x Combination Headphone and Microphone Jack

3.2 Chladicí systém

The Meshify 3 Ambience Pro RGB comes with three pre-installed 140mm Momentum RGB PWM fans in the front. These fans feature low-noise LCP blades and a true FDB bearing for quiet and efficient operation.

• Přední: Supports 3x 120mm or 140mm fans, or radiators up to 360mm.
• Nahoře: Supports 2x 120mm or 140mm fans, or radiators up to 280mm.
• Zadní: Supports 1x 120mm fan.

3.3 Ovládání RGB osvětlení

The integrated ARGB Gen 2 atmospheric lighting and fans are controlled via the included Adjust Pro Hub, which is pre-wired and mounted on the backside of the motherboard tray. Simply connect the hub to power and the PWM cable to your motherboard. The Adjust Pro Hub uses proprietary Type-C connectors for Momentum fans. A breakout cable is included for direct motherboard connection of PWM and ARGB if the hub is not desired.

4. Údržba

4.1 Čištění prachového filtru

Regular cleaning of dust filters is essential for maintaining optimal airflow and cooling performance.

• Front Mesh: The front mesh panel can be easily removed for cleaning by pulling it upwards from the bottom.
• Horní filtr: The top filter is integrated into the top panel, which can be removed by pulling the rear tab.
• PSU Filter: A convenient pull-out filter for the power supply is located on the side of the case, making it easy to access and clean without moving the entire system.

5. Řešení problémů

If you encounter any issues with your Meshify 3 Ambience Pro RGB case, please consider the following general troubleshooting steps:

• Bez napájení: Ensure all power connections, including the PSU and motherboard cables, are securely seated. Check the power button connection to the motherboard.
• Problémy s ventilátorem/RGB: Verify that the Adjust Pro Hub is correctly powered and connected to the motherboard. If using the breakout cable, ensure proper connections to the motherboard's PWM and ARGB headers.
• Přehřívání: Confirm that all fans are spinning correctly and that dust filters are clean to ensure unrestricted airflow. Check component temperatures using monitoring software.
• Volné panely: Ensure all side, front, and top panels are securely latched into place after installation or maintenance.

For persistent issues or advanced troubleshooting, please refer to the official Fractal Design support resources.

6. Specifikace

7. Záruka a podpora

For warranty information, technical support, or to access additional resources, please visit the official Fractal Design webnebo se obraťte na jejich zákaznický servis. Uschovejte si doklad o koupi pro případ reklamace.

• Fractal Design Official Webmísto: www.fractal-design.com
• Amazon Store: Fractal Design Store on Amazon