TONOR T40LP

TONOR T40LP Low Profile Mic Arm Desk Mount Instruction Manual

Zavedení

This manual provides comprehensive instructions for the setup, operation, and maintenance of your TONOR T40LP Low Profile Mic Arm Desk Mount. Please read these instructions carefully before use to ensure proper functionality and longevity of the product.

Obsah balení

Ověřte, zda jsou v balení přítomny všechny komponenty:

  • Rameno mikrofonu
  • Držák na stůl Clamp
  • 3/8'' to 5/8'' Screw Adapter
  • Four Cable Ties
Included components: microphone boom arm, desk mount clamp, screw adapter, and four cable ties.
Image: Included components of the TONOR T40LP Mic Arm.

Pokyny pro nastavení

  1. Attach the Desk Mount Clamp: Securely fasten the desk mount clamp k okraji stolu. Ujistěte se, že jeamp je pevně utažen, aby se zabránilo pohybu.amp supports desks up to 2.76 inches (7cm) thick.
    2. Desk mount clamp attached to a wooden desk, showing 360-degree rotation and maximum desk thickness of 2.76 inches.
    Image: Desk clamp installation and rotation capability.
  2. Vložte rameno výložníku: Insert the base of the microphone boom arm into the hole on the desk mount clamp. Tighten the knob on the clamp to secure the arm in place.
  3. Attach Your Microphone:
    • The boom arm features a standard 3/8'' screw.
    • If your microphone requires a 5/8'' screw, use the included 3/8'' to 5/8'' screw adapter.
    • Screw your microphone or microphone shock mount onto the boom arm's screw or adapter.
    4. Diagram showing a 3/8 inch screw and a 5/8 inch adapter, with various microphones compatible with the boom arm.
    Image: Microphone compatibility with 3/8'' screw and 5/8'' adapter.
  4. Správa kabelů: Použijte dodané stahovací pásky k upevnění kabelu mikrofonu podél ramene. Pomůže to udržovat uklizený pracovní prostor a zabrání rušení kabelů.
A white low-profile microphone boom arm mounted on a desk, positioned below a computer monitor, with a microphone attached.
Image: TONOR T40LP Mic Arm in a low-profile setup, providing an unobstructed view.

Návod k obsluze

The TONOR T40LP mic arm offers flexible adjustment for optimal microphone positioning.

  • Horizontální rotace: The arm can rotate 360 degrees horizontally at its base, allowing you to swing the microphone into position or out of the way.
  • Vertikální nastavení: The arm features 90-degree vertical adjustment, enabling you to raise or lower the microphone to your desired height.
  • Nastavení dosahu: The arm extends up to 30.3 inches (77cm) in width and 19.1 inches (48.5cm) in height, accommodating various desk sizes and user preferences.
  • Kapacita zatížení: The sturdy metal construction supports microphones weighing up to 1.5kg (3.3lbs).
Diagram illustrating the flexible adjustment capabilities of the mic arm, including 360-degree rotation, 90-degree vertical adjustment, and arm extension measurements.
Image: Flexible adjustment ranges for the mic arm.
A microphone boom arm with a 3.3 lbs (1.5 kg) weight hanging from its end, demonstrating its excellent load capacity.
Image: Demonstration of the mic arm's load capacity.

Video Guide: TONOR Microphone Boom Arm Overview

Video: This official TONOR video provides a visual overview of the microphone boom arm's features and adjustments.

Údržba

  • Čištění: Wipe the mic arm with a soft, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents.
  • Společná inspekce: Periodically check all joints and knobs to ensure they are securely tightened. This maintains stability and prevents unwanted movement.
  • Pružinový mechanismus: The T40LP features a hidden spring design. Avoid disassembling the arm to access internal springs, as this may damage the product and void the warranty.

Odstraňování problémů

  • Paže nedrží pozici: Ensure all adjustment knobs and the desk clamp are tightened securely. Over time, heavy microphones may require re-tightening.
  • Noise during adjustment: The T40LP's hidden spring design minimizes noise. If you experience unusual noise, check for any loose components or obstructions.
  • Microphone not fitting: Verify that your microphone's screw thread size is either 3/8'' or 5/8''. Use the provided adapter if necessary.

Specifikace

Název modeluT40LP
ZnačkaTONOR
BarvaBílý
MateriálLegovaná ocel, akrylonitrilbutadienstyren (ABS)
StylInvisible Spring
Základní typClamp
Maximální výška19.1 palce (48.5 cm)
Microphone Thread Size3/8 inch, 5/8 Inch
Doporučená maximální hmotnost1.5 kilogramů (3.3 liber)
Zahrnuté komponentyMicrophone Boom Arm, Desk Mount Clamp, Screw Adapter, Four Cable Ties

Informace o záruce

Tento produkt je dodáván s a 2-letá záruka. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official TONOR webwebu nebo kontaktujte zákaznickou podporu.

Zákaznická podpora

For further assistance, technical support, or inquiries regarding your TONOR T40LP Mic Arm, please visit the official TONOR store or contact their customer service department.

Oficiální obchod TONOR: TONOR Amazon Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.