Important Compatibility Information
This replacement remote control is specifically designed for certain MLily adjustable bed base models. To ensure proper functionality, please verify the following:
- This remote only fits for the control box made by Richmat, model number HJC9.
- It is compatible with the Richmat HJC25Z-0-0 NLP200 127780C250059 Control Box.
- Your existing remote control must be identické to this one in appearance and button layout for successful pairing.
- Tento dálkový ovladač je není univerzální. If you are unsure about compatibility, it is recommended to send details of your control box (under the bed) for verification before ordering.
Note: Batteries are not included. This remote requires 2 AAA batteries.
Pokyny k nastavení a párování
Follow these steps carefully to pair your new remote control with your adjustable bed base.
1. Nainstalujte baterie
Open the battery compartment on the back of the remote control. Insert 2 AAA batteries, ensuring correct polarity (+/-). Close the battery compartment securely.
Obrázek: Zadní view of the remote control with the battery cover open, illustrating where to insert the two AAA batteries.
2. Prepare the Bed Base
- Unplug and disconnect the power from the adjustable bed base.
- Čekat na 5 sekund.
- Připojte napájecí kabel zpět do zásuvky.
3. Initiate Pairing on Control Box
Locate the control box under the bed. This box often contains a battery backup. Double-click the "reset" button on the control box twice. This button may also be labeled "Learn" or "Reset Coding".
Image: A diagram illustrating the connection points of the bed base control box, along with a magnified view of the control box's identification label.
Important: Pairings must be completed within 15 seconds of initiating the reset on the control box. If 15 seconds pass, you must unplug the power again and restart from step 2. Ensure to pair when the light on the control box is on, as it will go out if not paired within 15 seconds.
4. Pair the Remote Control
- On the remote control, simultaneously press and hold the "head up" button and the "foot up" button for 10 sekund.
- While still holding these two buttons, press and release the "Learn" or "Reset Coding" button on the side of the control box under the bed. Do not press and hold this button.
- Once you hear beeps, this indicates that the remote control has successfully synced with the bed base.
Image: The remote control with the "head up" and "foot up" buttons outlined in red, illustrating the buttons to press and hold during the pairing process.
Obsluha dálkového ovládání
Once paired, your remote control allows you to adjust your MLily adjustable bed base. The remote features intuitive buttons for various positions.
Obrázek: Jasný view of the remote control's front face, displaying all functional buttons for bed adjustment.
| Ikona tlačítka | Funkce | Popis |
|---|---|---|
| ↰ (Head Up) | Head Section Up | Zvedne hlavovou část postele. |
| ↱ (Head Down) | Head Section Down | Snižuje hlavovou část postele. |
| ↲ (Foot Up) | Nožní část nahoru | Zvedne nožní část postele. |
| ↳ (Foot Down) | Nožní část dolů | Snižuje nožní část postele. |
| BYT | Plochá poloha | Vrací postel do zcela vodorovné polohy. |
| M | Pozice paměti | Activates a pre-set memory position (if configured on your bed base). |
Údržba
Abyste zajistili dlouhou životnost a správnou funkci dálkového ovladače, dodržujte tyto pokyny pro údržbu:
- Výměna baterie: Replace batteries when the remote's response becomes sluggish or stops working. Always use 2 new AAA batteries.
- Čištění: Dálkový ovladač otírejte měkkým, suchým hadříkem. Nepoužívejte tekuté čisticí prostředky ani abrazivní materiály.
- Skladování: Dálkový ovladač skladujte na suchém místě, mimo dosah extrémních teplot a přímého slunečního záření.
- Vyhněte se kapkám: Chraňte dálkový ovladač před fyzickými nárazy, protože pády mohou poškodit vnitřní součásti.
Odstraňování problémů
Pokud máte problémy s dálkovým ovladačem, zkuste následující kroky pro řešení potíží:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Dálkový ovladač nereaguje. | Vybité nebo nesprávně vložené baterie. | Vyměňte baterie za nové baterie AAA a dbejte na správnou polaritu. |
| Remote not controlling the bed. | Dálkový ovladač není spárován s roštem postele. | Follow the "Setup and Pairing Instructions" carefully to re-pair the remote. |
| Bed only responds intermittently. | Weak batteries or interference. | Vyměňte baterie. Ujistěte se, že v blízkosti základny postele nezpůsobují rušení žádná silná elektronická zařízení. |
| Remote does not look like the original. | Incorrect remote model purchased. | Verify your original remote and control box model number against the compatibility information. This remote is specifically for Richmat HJC9 control boxes and MLily NL200. |
Specifikace
- Model: For MLily NL200 Adjustable Bed Base
- Kompatibilní ovládací jednotka: Richmat HJC9, Richmat HJC25Z-0-0 NLP200 127780C250059
- Zdroj napájení: 2 x AAA baterie (nejsou součástí balení)
- Barva: Bílý
- Maximální počet podporovaných zařízení: 1
- Výrobce: SZHKHXD
Záruka a podpora
For any issues not covered in this manual or for warranty inquiries, please contact the seller or manufacturer directly.
- Výrobce: SZHKHXD
- Refer to your purchase documentation for specific warranty terms and contact information.