Zavedení
This manual provides detailed instructions for the assembly, operation, and maintenance of your HOSTACK King Bed Frame. Please read this manual thoroughly before beginning assembly to ensure safe and correct usage. This bed frame features a 55-inch headboard, upholstered in velvet with handmade pleats and deep button tufting, and a wingback design. It is designed for use without a box spring and includes wood slat support.
Důležité bezpečnostní informace
VAROVÁNÍ: Keep away from young children and pets to prevent choking hazards from small parts. Always follow assembly instructions precisely to prevent injury. Do not exceed the maximum weight capacity of 1200 pounds. Ensure all connections are securely fastened before use. Periodically check and re-tighten all bolts and screws.
Seznam komponent
Před montáží ověřte, zda jsou všechny níže uvedené díly přítomny a nepoškozené. Pokud některé díly chybí nebo jsou poškozené, kontaktujte zákaznickou podporu.
| Část | Popis | Množství |
|---|---|---|
| A | Čelo | 1 |
| B | Stupačka | 1 |
| C | Boční kolejnice | 2 |
| D | Středový nosník | 1 |
| E | Dřevěné lamely | Násobek |
| F | Sada hardwaru (šrouby, podložky, imbusový klíč) | 1 |
Nastavení a montáž
This bed frame is designed for straightforward assembly. All necessary tools are included. It is recommended to assemble with two people.
- Krok 1: Rozbalení a identifikace součástí
Carefully unpack all components from the single box. Lay them out on a clean, soft surface to prevent scratches. Refer to the Components List (Table 1) to identify each part.
Obrázek 1: Přesview of King Bed Frame components and dimensions. Dimensions are 85.1"L x 81.5"W x 55.1"H. Recommended mattress thickness is 10-12 inches. Weight capacity is 1000 lbs.
- Krok 2: Připevnění bočnic k čelu postele a nohám postele
Align the side rails (C) with the pre-drilled holes on the headboard (A) and footboard (B). Secure them using the bolts and washers from the hardware pack (F). Do not fully tighten the bolts until all major components are connected.
Obrázek 2: Přední strana view of the assembled bed frame, showcasing the tufted headboard and footboard with nailhead trim.
- Step 3: Install Center Support Beam
Attach the center support beam (D) to the designated brackets on the headboard and footboard. Ensure it is centered and level. Tighten the bolts securely.
- Krok 4: Umístění dřevěných lamel
Evenly space the wood slats (E) across the side rails and center support beam. Secure them in place using the provided fasteners or by pressing them into the pre-fitted slots. Ensure all slats are firmly seated to provide adequate mattress support.
- Krok 5: Konečné utažení
Once all components are in place, go back and fully tighten all bolts and screws using the Allen wrench. Do not overtighten.
Návod k obsluze
The HOSTACK King Bed Frame is designed for immediate use after proper assembly. Simply place your mattress directly onto the wood slats. No box spring is required.
- Ensure the mattress is centered on the frame to prevent shifting.
- The tall headboard provides comfortable backrest support for reading or watching television.
- The 5.2-inch clearance beneath the frame allows for easy access for robot vacuum cleaners.
Figure 3: Detail of the 55.1" deep diamond tufting headboard, designed for comfortable back support.
Figure 4: The 5.2-inch clearance under the bed frame facilitates easy cleaning with robot vacuum cleaners.
Údržba
Správná péče prodlouží životnost a vzhled rámu vaší postele.
- Čištění: For the velvet upholstery, gently vacuum with a soft brush attachment to remove dust and debris. For spills, blot immediately with a clean, dry cloth. For stubborn stains, a mild fabric cleaner designed for velvet can be used, testing on an inconspicuous area first.
- Kontrola hardwaru: Periodically (every 3-6 months) check all bolts and screws to ensure they remain tight. Re-tighten if necessary to maintain stability and prevent squeaks.
- Vyhněte se přímému slunečnímu záření: Prolonged exposure to direct sunlight may cause the velvet fabric to fade.
- Rozložení hmotnosti: Distribute weight evenly on the bed frame. Avoid standing or jumping on the bed.
Figure 5: Key design elements of the bed frame include a double nail design, handmade pleats, and a curved wingback headboard.
Odstraňování problémů
If you encounter any issues with your bed frame, refer to the common problems and solutions below.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Skřípavé zvuky | Loose bolts or slats; friction between parts. | Tighten all bolts. Ensure wood slats are properly seated. The EVA mute bars are designed to minimize friction. |
| Posuvná matrace | Improper mattress placement; uneven floor. | Ensure mattress is centered. If floor is uneven, use furniture levelers under the bed legs. The tall footboard and high side rails are designed to hold the mattress in place. |
| Rám postele se zdá nestabilní | Incomplete assembly; loose connections. | Review assembly steps and ensure all bolts are fully tightened. Check that the center support beam is correctly installed. |
Specifikace
- Značka: HOSTACK
- Model: Rám postele King
- Velikost: Král
- Barva: Černý
- Rozměry produktu: 85.1 cm D x 81.5 cm Š x 55.1 cm V
- Materiál: Upholstered Velvet, Steel Frame, Wood Slats
- Nosnost: Až 1200 liber
- Kompatibilita s matracemi: No Box Spring Required, Wood Slat Support
- Speciální vlastnosti: Adjustable (implied by no box spring), Fade Resistant (fabric property), Squeak Resistant (EVA mute bars), Sturdy (steel frame, wood slats)
- Požadovaná montáž: Ano
Záruka a podpora
For any questions, missing parts, or issues with your HOSTACK King Bed Frame, please contact our customer support team. We offer 7/24 service and are always ready to help you.
- Služby zákazníkům: Please message us via "Contact Seller" on Amazon.
- Zásady vrácení: 30denní lhůta pro vrácení peněz/výměnu.
- Plány ochrany: K dispozici je volitelné dvouleté a tříleté ochranné plány.