Uživatelská příručka k solárnímu pouličnímu osvětlení OKPRO S-2000A 20000W

1. Úvod

This manual provides essential instructions for the installation, operation, and maintenance of your OKPRO S-2000A 20000W Solar Street Light. Please read this manual thoroughly before installation and retain it for future reference.

2. Bezpečnostní informace

• Ujistěte se, že všechna elektrická připojení jsou bezpečná a řádně izolovaná.
• Nepokoušejte se produkt rozebírat ani upravovat, mohlo by to vést ke zrušení záruky a ohrozit bezpečnost.
• Install the solar panel in a location that receives direct sunlight for optimal charging performance.
• Avoid installing the light near heat sources or flammable materials.
• Handle the product with care to prevent damage to the solar panel or LED array.

3. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• 1 x Solar Powered Street Light
• 1 x Solární panel
• 1 x montážní držák
• 1 x Set of Mounting Accessories (screws, anchors, etc.)
• 1 x Dálkové ovládání

Image: The solar street light, solar panel, mounting bracket, remote control, and various mounting accessories are shown, along with illustrations of pole mount and wall mount installation options.

4. Specifikace

Image: A diagram illustrating the 320° wide-angle illumination pattern and the coverage area of 3500 square feet, with a recommended installation height range of 16-26 feet.

Image: Demonstrates the IP66 waterproof rating and the light's resilience to various weather conditions, including heavy rain, strong winds (hurricane level), extreme cold (-76°F), and high temperatures (140°F).

5. Nastavení a instalace

5.1 Výběr místa instalace

Select a location that receives maximum direct sunlight throughout the day. Avoid areas shaded by buildings, trees, or other obstructions. The recommended installation height is between 16 to 26 feet (5 to 8 meters) for optimal light distribution.

5.2 Možnosti montáže

The OKPRO S-2000A supports two primary installation methods:

• Pole Mount: Attach the light fixture and solar panel to a pole with a diameter of 1.5 to 4 inches.
• Montáž na stěnu: Secure the light fixture and solar panel directly to a sturdy wall surface.

5.3 kroky instalace

1. Sestavte montážní držák: Attach the mounting bracket to the light fixture using the provided screws.
2. Montáž svítidla: Secure the assembled light fixture to your chosen pole or wall using the appropriate mounting accessories. Ensure it is firmly attached.
3. Instalace solárního panelu: Attach the solar panel to the separate mounting arm. Connect the solar panel cable to the light fixture.
4. Nastavení úhlů: Adjust the angle of both the solar panel and the light fixture to maximize sun exposure and desired light coverage. The solar panel should ideally face south at a 45-degree angle for optimal charging.

Obrázek: Detail views demonstrating the horizontal and vertical adjustment mechanisms for both the solar panel and the light fixture, allowing for precise positioning to optimize sunlight absorption and light direction.

Image: A visual comparison highlighting the superior charging efficiency of the single crystal silicon solar panel (used in this product) compared to a polysilicon panel, showing a full charge for the 40000mAh battery.

6. Návod k obsluze

6.1 Automatic Dusk-to-Dawn Operation

The solar street light is equipped with a light sensor that automatically turns the light ON at dusk and OFF at dawn, provided the AUTO mode is activated via the remote control.

Image: Illustrates the solar street light's automatic operation, showing the solar panel absorbing sunlight during the day for 6-8 hours of fast charging, and the light illuminating for up to 12 hours at night.

6.2 Funkce dálkového ovládání

Use the included remote control to manage the light's settings:

• NA: Turns the light on at 100% brightness. The brightness can be adjusted. The light will automatically turn on at dusk and off at dawn if AUTO mode is active.
• OFF: Turns the light off. The light will not automatically turn on the next day unless turned on again with the remote control.
• +/- (Brightness Adjustment): Short press to adjust brightness in steps (e.g., 50%, 100%). Long press for continuous 10%-100% brightness adjustment.
• AUTO: Activates the dusk-to-dawn automatic operation.
• 3H/5H/8H: Sets a timer for the light to stay on for 3, 5, or 8 hours after activation, then automatically turns off.

Image: A detailed diagram of the remote control, explaining the function of each button including ON/OFF, brightness adjustment, AUTO mode, and timer settings (3H, 5H, 8H).

7. Údržba

7.1 Čištění solárního panelu

Regularly clean the surface of the solar panel to ensure maximum sunlight absorption. Dust, dirt, and debris can reduce charging efficiency. Use a soft, damp cloth to wipe the panel. Avoid abrasive cleaners or harsh chemicals.

7.2 Obecná kontrola

Periodically check all mounting hardware to ensure it remains secure. Inspect cables for any signs of wear or damage. If any damage is found, contact customer support for assistance.

8. Řešení problémů

9. Záruka a podpora

9.1 Informace o záruce

The OKPRO S-2000A Solar Street Light comes with a 2-year after-sales service and support. This warranty covers manufacturing defects and ensures stable operation under normal use conditions.

9.2 Zákaznická podpora

For any questions, technical assistance, or warranty claims, please contact our professional support team. We are committed to ensuring your satisfaction and providing timely assistance.

Contact information can typically be found on the product packaging or the official OKPRO webmísto.