OKPRO Solar Lights Outdoor (2 Pack) - 168LED 6500K Flood Light Instruction Manual

1. Úvod

Thank you for choosing the OKPRO Solar Lights Outdoor. This product is designed to provide efficient and reliable outdoor illumination using solar power, featuring motion sensing capabilities and multiple lighting modes. This manual will guide you through the installation, operation, and maintenance of your new solar lights.

Obrázek 1: Přední strana view of the OKPRO Solar Light, showcasing jeho octagonal design and LED arrangement.

2. Co je v krabici

Zkontrolujte prosím obsah balení, abyste se ujistili, že jsou přítomny všechny položky:

• Lamp body (2 units)
• Lamp post/Mounting bracket (2 units)
• Screw accessories (for installation)
• Dálkové ovládání (2 jednotky)
• Návod k použití (tento dokument)

Video 1: Overview of the OKPRO Solar Light, demonstrating its features and components.

3. Klíčové vlastnosti

• Upgraded Octagální design: Equipped with 168 super LED beads for 360° wide-angle illumination without blind spots.
• Vysoce účinný solární panel: Features polycrystalline silicon photovoltaic panels with a 20% increased photoelectricity conversion rate.
• 180° nastavitelný držák: Allows for optimal positioning of the solar panel to maximize daylight charging.
• Odolný a voděodolný: Constructed from high-impact resistant ABS material with an IP66 waterproof rating, suitable for various outdoor environments.
• Intelligent Radar Motion Sensor: Offers three distinct lighting modes for customizable operation.
• Dálkové ovládání: Conveniently adjust settings and modes from a distance.

Figure 2: Illustration of the light's octagonal design providing 360-degree illumination.

Obrázek 3: Detail view of the 168 super bright LED lamp korálky.

Figure 4: Depiction of the upgraded solar panel with improved efficiency.

Figure 5: Visual representation of the IP66 waterproof rating, ensuring durability in various weather conditions.

4. Nastavení a instalace

Follow these steps to properly set up and install your OKPRO Solar Lights:

1. Počáteční poplatek: Before first use, ensure the solar panel is exposed to direct sunlight for 8-12 hours to fully charge the internal batteries. This allows the light to function normally.
2. Vyberte umístění: Select an outdoor location where the solar panel can receive direct sunlight for most of the day. Avoid areas with overhead obstructions like trees or buildings that might reduce charging efficiency.
3. Sestavte držák: Připojte lamp body to the mounting bracket using the provided screws. The bracket allows for 180° adjustment to optimize solar panel angle and light direction.
4. Upevněte světlo: Use the included screw accessories to securely mount the light to a wall or lamp post. Ensure the mounting surface is stable.
5. Upravit úhel: Once mounted, adjust the angle of the solar panel to face the sun for maximum exposure. Adjust the light head to illuminate the desired area.

Figure 6: The solar light with its adjustable mounting bracket, ready for installation.

Figure 7: The remote control for adjusting light modes and settings.

5. Návod k obsluze

Your OKPRO Solar Light features an intelligent radar motion sensor and can be controlled via the included remote. It offers three distinct lighting modes:

• Mode 1 (Motion Activated Full Brightness, then OFF): The light remains off until motion is detected. When motion is detected, the light turns on at 100% brightness. It automatically turns off when no motion is detected for a period.
• Mode 2 (Motion Activated Full Brightness, then Dim): The light stays at 30% brightness at night. When motion is detected, it brightens to 100%. After 30 seconds of no motion, it returns to 30% brightness.
• Mode 3 (Constant 50% Brightness): The light automatically turns on at night at a constant 50% brightness and stays on until dawn or battery depletion.

Use the remote control to select your desired mode (Mode 1, Mode 2, Mode 3 buttons). The remote also has ON/OFF buttons and timer settings (e.g., 3hrs/5hrs to sensor, 4hrs constant light).

Figure 8: Visual explanation of the three available lighting control modes.

6. Údržba

To ensure optimal performance and longevity of your solar lights, consider the following maintenance tips:

• Čistý solární panel: Solární panel pravidelně otírejte měkkým hadříkemamp hadříkem, abyste odstranili prach, nečistoty nebo úlomky. Čistý panel zajišťuje maximální absorpci slunečního záření a účinnost nabíjení.
• Jasné překážky: Periodically check for any new obstructions (e.g., growing branches, new structures) that might block sunlight from reaching the solar panel.
• Péče o baterie: The integrated lithium-ion batteries are designed for long-term use. Avoid fully discharging the batteries frequently to prolong their lifespan.

7. Řešení problémů

If your solar light is not functioning as expected, try the following:

• Světlo se v noci nezapíná:
  • Ensure the light has received sufficient direct sunlight for charging (8-12 hours recommended for initial use).
  • Verify that the solar panel is not obstructed by dirt, leaves, or shadows.
  • Check if the light is set to the correct operating mode using the remote control.
• Nefunkční pohybový senzor:
  • Confirm the light is in Mode 1 or Mode 2, which utilize the motion sensor.
  • Ujistěte se, že je snímač čistý a bez překážek.
  • Test the sensor by moving within its detection range after dark.
• Světlo je slabé nebo krátkodobé:
  • The solar panel may not be receiving enough direct sunlight. Relocate the light or clear any obstructions.
  • The battery may not be fully charged. Allow for several days of full sun exposure.
  • Extrémní teploty mohou ovlivnit výkon baterie.

8. Specifikace

9. Záruka a podpora

OKPRO street lights are warranted for 2 years. This is a limited warranty. Our solar street lights are FCC, CE, and RoHS certified, ensuring product quality and safety.

If you have any questions or require support regarding your LED solar street lights, please feel free to contact us.