Rfiver Universal Floor Speaker Stands (Model SK1001MAW)

Zavedení

Thank you for choosing the Rfiver Universal Floor Speaker Stands. These stands are designed to elevate your satellite or bookshelf speakers to an optimal listening height, enhancing your audio experience by creating a listening "sweet spot" and reducing unwanted reflections. This manual provides essential information for the safe and correct assembly, operation, and maintenance of your speaker stands.

Image: Speakers on stands in a living room, demonstrating optimal sound positioning.

Image: Various speaker types on stands, highlighting universal fit.

Bezpečnostní informace

• Před montáží a použitím si pečlivě přečtěte všechny pokyny.
• Do not exceed the maximum weight capacity of 10 kg (22 lbs) per stand.
• Ensure all screws and connections are securely tightened before placing speakers on the stands.
• Stojany umístěte na stabilní, rovný povrch, aby se nepřevrátily.
• Udržujte malé části mimo dosah dětí, abyste předešli nebezpečí udušení.
• Avoid placing stands in high-traffic areas where they could be easily knocked over.

Obsah balení

Před zahájením montáže ověřte, zda jsou přítomny všechny součásti. Pokud některé součásti chybí nebo jsou poškozené, kontaktujte zákaznickou podporu.

• Top Plates (2) - Marbled Glass
• Support Poles (2) - Metal
• Base Plates (2) - Marbled Glass
• Montážní materiál (šrouby, podložky)
• Non-slip Shockproof Pads (for top plates)
• Adjustable Feet (for carpeted floors)
• Rubber Pads (for hard floors)

Nastavení a montáž

The Rfiver speaker stands feature a tool-free assembly process. Follow these steps for quick and secure setup:

1. Attach the Support Pole to the Base Plate: Align the bottom end of a support pole with the center of a base plate. Secure it by hand-tightening the pre-attached screw mechanism. Ensure it is firm and stable.
2. Attach the Top Plate to the Support Pole: Align the top end of the support pole with the center of a top plate. Secure it by hand-tightening the pre-attached screw mechanism.
3. Install Floor Protection: Depending on your flooring, choose either the adjustable feet (for carpet) or the rubber pads (for wooden, cement, or tiled floors). Screw these into the designated holes on the underside of the base plate. The adjustable feet can be used to level the stand on uneven surfaces.
4. Apply Non-Slip Pads: Peel and stick the provided non-slip shockproof pads onto the top surface of the top plate. These pads prevent your speakers from sliding and absorb vibrations.
5. Správa kabelů: The support poles feature large holes (40mm H x 20mm W) for routing speaker cables. Thread your speaker cables through the top hole, down the pole, and out the bottom hole for a clean and organized appearance.

Image: Applying non-slip pads and tool-free installation.

Image: Options for floor protection (spikes for carpet, rubber for hard floors).

Image: Cable management system through the stand pole.

Návod k obsluze

Proper placement of your speaker stands is crucial for achieving the best sound quality.

• Umístění reproduktorů: Carefully place your satellite or bookshelf speakers onto the top plates of the stands. Ensure they are centered and stable on the non-slip pads.
• Optimal Listening Height: The 28-inch (840mm) height of these stands is designed to position your speakers at ear level when seated, creating an ideal listening "sweet spot." Adjust your seating position if necessary to align with the speaker height.
• Akustika místnosti: Experiment with the distance of the stands from walls and corners to optimize bass response and soundstage. Generally, pulling speakers slightly away from walls can improve clarity.
• Správa kabelů: Utilize the integrated cable management system to keep speaker wires tidy and prevent tripping hazards. This also contributes to a cleaner aesthetic.

Údržba

• Čištění: Wipe the glass and metal surfaces with a soft, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, která by mohla poškodit povrchovou úpravu.
• Pravidelné kontroly: Periodically check all connections and screws to ensure they remain tight and secure.
• Kontrola podložky: Inspect the non-slip pads and floor protection feet for wear and tear. Replace if necessary to maintain stability and speaker protection.

Odstraňování problémů

Problém: Stojan se kymácí nebo je nestabilní.

Řešení: Ensure all assembly screws are fully tightened. If using adjustable feet, verify they are properly leveled on the floor. Check that the stand is on a flat, even surface.

Issue: Speakers slide on the top plate.

Řešení: Confirm that the non-slip shockproof pads are correctly applied to the top plate. If pads are worn, consider replacing them.

Issue: Cables are not neatly managed.

Řešení: Reroute cables through the designated holes in the support pole. Ensure cables are not excessively thick or numerous to fit comfortably within the channel.

Specifikace

Image: Detailed product measurements.

Informace o záruce

Rfiver products are manufactured to high-quality standards. This product comes with a limited warranty against defects in materials and workmanship under normal use. Please refer to the warranty card included with your purchase or visit the official Rfiver website for specific terms and conditions. Keep your proof of purchase for warranty claims.

Zákaznická podpora

If you have any questions, encounter issues, or require assistance with your Rfiver Universal Floor Speaker Stands, please do not hesitate to contact our customer support team. Our experts are available to help you.

• E-mail: support@rfiver.com (Napřample email, please refer to actual product documentation for correct contact information)
• Webmísto: Visit the Rfiver Store on Amazon