1. Bezpečnostní pokyny
Vždy si přečtěte a pochopte všechna bezpečnostní varování, pokyny, ilustrace a specifikace dodané s tímto elektrickým nářadím. Nedodržení všech níže uvedených pokynů může vést k úrazu elektrickým proudem, požáru a/nebo vážnému zranění.
- Elektrická bezpečnost: Ujistěte se, že napájecí zdroj odpovídá objtage specified on the dust extractor. Do not operate in wet conditions or near flammable liquids/gases.
- Osobní ochranné prostředky (OOP): Always wear appropriate PPE, including safety glasses, hearing protection, and a dust mask, especially when working with fine dust.
- Správné použití: Use the dust extractor only for its intended purpose. Do not use it to pick up hot ashes, sharp objects, or hazardous materials without proper precautions.
- Údržba: Disconnect from power before performing any maintenance or cleaning. Regularly inspect the hose, filters, and power cord for damage.
2. Konec produktuview
The Fein Turbo II X AC PRO is a high-performance wet/dry dust extractor designed for professional use. It features a powerful motor, automatic filter cleaning, and HEPA filtration for efficient dust and liquid collection. Its robust construction and thoughtful design ensure durability and ease of use in demanding environments.
A worker uses the Fein Turbo II X AC PRO wet/dry dust extractor to clean a tiled floor, demonstrating its powerful suction for general cleanup.
3. Nastavení a montáž
Follow these steps to set up your Fein Turbo II X AC PRO dust extractor:
- Rozbalení: Opatrně vyjměte všechny součásti z obalu. Zkontrolujte, zda nejsou poškozené.
- Instalace filtru: Ensure the HEPA filter is correctly installed. For dry vacuuming, a filter bag is recommended.
- Připojení hadice: Attach the anti-static suction hose to the inlet port on the front of the unit. Ensure a secure connection.
- Příslušenství: Connect the desired accessory (e.g., extension tubes, floor nozzle) to the end of the suction hose.
- Připojení napájení: Zapojte napájecí kabel do vhodné elektrické zásuvky.
This image highlights the premium HEPA filter feature of the Fein Turbo II X AC PRO, essential for capturing fine dust particles and maintaining air quality.
This video demonstrates the setup process for the Fein Turbo I (similar to Turbo II X AC PRO), including filter installation, hose connection, and power tool integration. It also showcases the unit's high suction power, low noise level, and mobility.
4. Návod k obsluze
The Fein Turbo II X AC PRO offers versatile operation for various cleaning tasks:
- Zapnutí/vypnutí: K zapnutí nebo vypnutí jednotky použijte hlavní vypínač.
- Autostart Function: For synchronized operation with power tools, plug your tool into the integrated autostart outlet. The dust extractor will activate automatically when the power tool is switched on, with a slight delay to prevent current overload.
- Mokré vysávání: When vacuuming liquids, ensure the filter bag is removed and the HEPA filter is suitable for wet use or replaced with a wet filter. Monitor the liquid level to prevent overfilling.
- Suché vysávání: For dry debris, use the HEPA filter and a disposal bag for optimal collection and easy disposal.
- Ovládání sání: Adjust the suction power using the rotary knob on the control panel to match the task requirements.
The Fein Turbo II X AC PRO dust extractor is connected to a power tool, actively collecting dust during a woodworking task, highlighting its integration with other tools.
This video demonstrates the setup process for the Fein Turbo I (similar to Turbo II X AC PRO), including filter installation, hose connection, and power tool integration. It also showcases the unit's high suction power, low noise level, and mobility.
5. Údržba
Regular maintenance ensures optimal performance and longevity of your dust extractor:
- Automatic Filter Cleaning (AC): The unit features a fully automatic filter cleaning system. This system periodically pulses to dislodge dust from the filter, maintaining consistent suction.
- Výměna filtru: Replace the HEPA filter periodically or when suction significantly decreases despite automatic cleaning. Refer to the filter type for specific replacement intervals.
- Disposal Bag: For dry vacuuming, use disposal bags. Replace them when full to prevent loss of suction and maintain hygiene.
- Čištění nádoby: Empty and clean the collection container regularly, especially after wet vacuuming, to prevent odors and bacterial growth.
- Úložiště příslušenství: Utilize the practical accessory storage on the unit to keep tools organized and protected.
The image shows the Fein Turbo II X AC PRO dust extractor, emphasizing its fully automatic filter cleaning system, which helps maintain optimal suction and extends filter life.
The dust extractor features practical on-board storage for accessories, keeping them organized and readily accessible during use.
6. Řešení problémů
If you encounter issues with your Fein Turbo II X AC PRO, refer to the following common troubleshooting steps:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žádná síla | Power cord unplugged, tripped circuit breaker, faulty outlet. | Check power connection, reset circuit breaker, try a different outlet. |
| Ztráta sání | Clogged hose/nozzle, full filter bag, dirty HEPA filter, container full (wet vacuuming). | Clear obstructions, replace filter bag, clean/replace HEPA filter, empty container. |
| Neobvyklý hluk | Foreign object in impeller, loose components, motor issue. | Disconnect power and inspect for foreign objects. If noise persists, contact customer support. |
| Prach uniká | Improperly installed filter, damaged filter, loose hose connection. | Ensure filter is seated correctly, replace damaged filter, tighten hose connections. |
7. Specifikace
Key technical specifications for the Fein Turbo II X AC PRO:
| Funkce | Specifikace |
|---|---|
| Značka | Fein |
| Název modelu | Turbo II X AC PRO |
| Kapacita | 9.2 galony (přibližně 34.8 litrů) |
| Průtok vzduchu (CFM) | 153 CFM |
| Static Water Lift (PSI) | 98 PSI (approx. 245 mbar) |
| Výkon motoru | 1.47 HP |
| Typ filtru | HEPA filtr |
| Délka hadice | 13 stop |
| Délka napájecího kabelu | 25 stop |
| Úroveň hluku | 70 decibelů |
| Rozměry produktu | 10"L x 10"W x 10"H (Note: These dimensions seem generic and may not reflect the actual product size accurately.) |
| Hmotnost položky | 25 libry |
| Zahrnuté komponenty | Accessory Kit (HEPA filter, anti-static suction hose, metal extension tubes, disposal bag, crevice nozzle, dusting brush, combination tool with inserts, elbow) |
This graphic illustrates the key benefits of the Fein Turbo II X AC PRO: powerful suction (153 CFM, 98.4 Static Waterlift), easy 360-degree rotation, and a large 9.2-gallon container volume.
A visual representation of the comprehensive accessory kit provided with the dust extractor, including metal extension tubes, a combination nozzle, crevice nozzle, elbow, and dusting brush for diverse cleaning needs.
Podrobný diagram ukazujeasing a range of additional accessories available for Fein Turbo dust extractors, including different filter bags, hoses, and specialized nozzles, all sold separately.
8. Záruka a podpora
Fein products are manufactured to the highest quality standards. For warranty information and customer support, please refer to the official Fein webnebo kontaktujte jejich oddělení zákaznických služeb.
Záruka: This product typically comes with a manufacturer's warranty covering defects in materials and workmanship. Specific terms and duration may vary by region and purchase date. Please retain your proof of purchase for warranty claims.
Zákaznická podpora: For technical assistance, spare parts, or service, please visit the Fein Store on Amazon or the official Fein website. You can also find contact information for your local service center there.