Zavedení
Thank you for choosing the Generic KL22G-64T TV Mount. This mount is designed to securely hold flat-panel televisions ranging from 37 to 70 inches, supporting VESA patterns up to 600x400mm, and features a tilt function for optimal viewing angles. Please read this manual thoroughly before installation to ensure safe and correct setup.
Obsah balení
Verify that all components are present and undamaged. If any parts are missing or defective, please contact customer support.
- Wall Plate (A)
- TV Brackets (B x2)
- Mounting Hardware Kit (C) - Includes various screws, washers, spacers, and anchors.
- Návod k použití (tento dokument)
Image: All components included in the KL22G-64T TV Mount package.
Důležité bezpečnostní informace
VAROVÁNÍ: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer.
- Do not install this product on a wall that is not structurally sound.
- Ensure the mounting surface can safely support the combined weight of the mount and your television.
- Always use a stud finder to locate wood studs or consult a professional for concrete/brick wall installations.
- Nepřekračujte maximální nosnost 45 kg (99 liber).
- Tento výrobek je určen pouze pro vnitřní použití.
- Během instalace držte děti a domácí zvířata mimo dosah.
Nastavení a instalace
Požadované nástroje (nejsou součástí dodávky)
- Šroubovák s křížovou hlavou
- Drill with appropriate drill bits (e.g., 10mm for concrete/brick, 5.5mm for wood studs)
- Vyhledávač cvočků
- Úroveň
- Měřicí páska
- Tužka
- Kladivo (na betonové kotvy)
Step 1: Attaching TV Brackets to Your TV
Opatrně položte televizor displejem dolů na měkký, čistý povrch, abyste zabránili poškození obrazovky.
- Identifikujte montážní otvory VESA na zadní straně televizoru.
- Select the correct diameter and length of screws (M4, M6, or M8) from the hardware kit (C) that fit your TV's mounting holes. Use washers and spacers if necessary to ensure a snug fit without overtightening.
- Attach the two TV Brackets (B) to the back of your TV using the selected screws. Ensure the brackets are centered and level, with the hooks facing downwards.
Image: Attaching the TV brackets to the rear of the television.
Step 2: Mounting the Wall Plate to the Wall
Determine the desired height for your TV. Use a level and pencil to mark the drilling locations.
- Pro instalaci dřevěných sloupků: Use a stud finder to locate the center of two adjacent wood studs. Position the Wall Plate (A) against the wall, ensuring it is level, and mark the drilling points within the studs. Drill pilot holes (approx. 5.5mm diameter) into the studs. Secure the Wall Plate (A) using the lag bolts and washers provided in hardware kit (C).
- For Concrete/Brick Wall Installation: Position the Wall Plate (A) against the wall, ensuring it is level, and mark the drilling points. Drill pilot holes (approx. 10mm diameter) to a depth of at least 50mm. Insert the concrete anchors into the drilled holes, tapping gently with a hammer if needed. Secure the Wall Plate (A) using the lag bolts and washers into the anchors.
Image: Securing the wall plate to the chosen mounting surface.
Step 3: Mounting the TV to the Wall Plate
This step typically requires two people for safety.
- Carefully lift the TV with the attached brackets.
- Align the hooks on the TV Brackets (B) with the top edge of the Wall Plate (A).
- Gently lower the TV, ensuring the brackets engage securely with the wall plate. You should hear a click or feel the TV settle into place.
- Locate the safety screws or locking mechanisms on the bottom of the TV Brackets. Tighten these screws to prevent the TV from accidentally lifting off the wall plate.
Image: Hanging the television onto the wall plate and securing it.
Návod k obsluze
Nastavení úhlu náklonu
The KL22G-64T mount allows for easy tilt adjustment to reduce glare and optimize your viewzkušenosti.
- To adjust the tilt, gently push the bottom of the TV forward or pull it back to achieve the desired angle.
- Some models may have knobs or levers on the side of the TV brackets that need to be loosened before tilting and tightened afterward to secure the angle. Refer to the specific design of your TV brackets.
Údržba
Pravidelná údržba zajistí dlouhou životnost a bezpečnost vašeho televizního držáku.
- Periodically check all screws and bolts to ensure they are tight and secure. Do not overtighten.
- Zkontrolujte držák, zda nevykazuje známky opotřebení, poškození nebo koroze.
- Držák čistěte měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- If you notice any issues, discontinue use and contact customer support.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Televizor není vodorovně | Nástěnná deska nebo držáky televizoru nejsou v rovině. | Remove TV, re-level wall plate or adjust TV brackets if possible. Ensure all screws are tightened evenly. |
| TV feels unstable | Mounting screws are loose; incorrect anchors used; wall not strong enough. | Check all mounting screws for tightness. Verify correct anchors were used for your wall type. Consult a professional if wall strength is a concern. |
| Cannot tilt TV | Tilt mechanism is too tight or locked. | Loosen any tilt adjustment knobs or bolts on the TV brackets. Refer to operating instructions. |
Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | KL22G-64T (Mfr Part Number: BSL502688BK) |
| Typ montáže | Držák na zeď |
| Typ pohybu | Náklon |
| Značka | Obecný |
| Materiál | Kov |
| Kompatibilní zařízení | Televize |
| Minimum Supported Screen Size | 37 palce |
| Maximum Supported Screen Size | 70 palce |
| Kompatibilita VESA | Up to 600x400mm (Max) |
| Hmotnostní kapacita | 45 kg (99 lb) |
Záruka a podpora
This Generic TV Mount comes with a limited warranty against defects in materials and workmanship. Please refer to the warranty card included in your package or visit our webPodrobné obchodní podmínky naleznete na webových stránkách. Uschovejte si účtenku jako doklad o koupi.
For technical assistance, missing parts, or warranty claims, please contact our customer support team:
- E-mail: support@genericmounts.com
- Telefon: 1-800-XXX-XXXX (Monday-Friday, 9 AM - 5 PM EST)
- Webmísto: www.genericmounts.com/support
Note: As no specific warranty or support information was provided, generic contact details are used as placeholders.
