HiKOKI AC100V Multi-Tool CV350V2 Instruction Manual

1. Úvod

Thank you for choosing the HiKOKI AC100V Multi-Tool CV350V2. This versatile tool is designed for a wide range of applications, offering efficiency and ease of use for various tasks. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your multi-tool. Please read it thoroughly before use and keep it for future reference.

2. Bezpečnostní informace

Vždy dodržujte základní bezpečnostní opatření, abyste snížili riziko požáru, úrazu elektrickým proudem a zranění osob. Nedodržení těchto pokynů může vést k vážnému zranění.

• Přečtěte si všechny pokyny: Seznamte se s funkcemi a provozními postupy nástroje.
• Používejte vhodné osobní ochranné prostředky (OOP): Always wear safety glasses, hearing protection, and gloves when operating the tool.
• Udržujte pracovní prostor čistý a dobře osvětlený: Nepořádek nebo tmavé prostory vedou k nehodám.
• Vyhněte se náhodnému spuštění: Ensure the switch is in the off-position before plugging in the tool or picking it up.
• Zajištění obrobku: Vždy třamp or secure the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.
• Udržujte správný postoj a rovnováhu: Do not overreach. Proper footing and balance enable better control of the tool in unexpected situations.
• Odpojení napájení: Před prováděním jakýchkoli úprav, výměnou příslušenství nebo uložením nářadí jej vždy odpojte od zdroje napájení.

3. Konec produktuview

The HiKOKI AC100V Multi-Tool CV350V2 is a powerful and lightweight oscillating tool designed for precision work. Its slim body ensures comfortable handling and ease of use in various applications.

Dodávané příslušenství:

• Blade (MSD 32PBC)
• Sandpaper attachment pad (MU 93D)
• Sandpapers (6 sheets: #60 x 2, #120 x 2, #240 x 2)
• Pouzdro na příslušenství
• Main carrying case

Figure 1: HiKOKI AC100V Multi-Tool CV350V2 and its standard accessories.

4. Nastavení

4.1 Blade and Accessory Installation/Removal

The CV350V2 features an easy blade exchange system, with lever operation approximately 70% lighter than previous models, allowing for quick and secure attachment of accessories.

1. Ujistěte se, že je nástroj odpojen od zdroje napájení.
2. Lift the lever on the tool head to release the accessory.
3. Align the desired accessory (blade or sanding pad) with the tool shaft and insert it. The tool's temporary holding mechanism ensures secure placement.
4. Push the lever back down firmly to lock the accessory in place. Ensure the accessory is securely fastened before operation.

Figure 2: Easy blade exchange using the lever mechanism.

5. Návod k obsluze

5.1 Zapnutí/vypnutí

To turn the tool ON, slide the power switch to the 'ON' position. To turn it OFF, slide the switch to the 'OFF' position.

5.2 Mode Selection and Speed Adjustment

The CV350V2 offers both Auto Mode and Normal Mode (1-5 stages) for optimal performance across different tasks. The oscillation speed can be adjusted from 6,000 to 20,000 min-1.

• Normální režim: Use the dial to select a speed setting from 1 to 5, corresponding to 6,000 to 20,000 oscillations per minute.
• Automatický režim: In Auto Mode, the tool automatically adjusts the oscillation speed based on the load, reducing noise and vibration during no-load operation and increasing speed when cutting. This allows for easier alignment of the blade at the start of a cut.

Figure 3: Speed adjustment dial for selecting operating modes.

5.3 Applications and Usage Examples

With 37 types of interchangeable accessories (sold separately), the multi-tool can handle a wide variety of tasks including flush cutting, pocket cutting, scraping, and sanding.

• Cutting Finishing Materials (e.g., Floor Materials): Ideal for precise cuts in tight spaces.

Figure 4: Cutting carpet with the multi-tool.

• Drilling Holes (e.g., Floors, Plasterboard): Create precise openings for outlets or other installations.

Figure 5: Performing a pocket cut for an electrical outlet.

• Cutting Copper Pipes/Metal Pipes: Use appropriate blades for metal cutting.
• Řezání dlaždic: Efficiently remove grout or cut tiles for repairs or installations.

Figure 6: Cutting tile grout with the multi-tool.

• Removing Hardened Adhesives/Bonds: Scrape away old adhesives from surfaces.
• Removing Sealants/Caulking: Easily remove old caulk or sealant.
• Sanding Wood: Use the sanding pad for finishing wood surfaces.
• Cutting Insulation/Soft Resins: Make clean cuts in various soft materials.

Note: Depending on the type of workpiece and accessory, cutting thick copper pipes (metal pipes) or baked-in nails may not be possible.

6. Údržba

Pravidelná údržba zajistí dlouhou životnost a bezpečný provoz vašeho multifunkčního nástroje.

• Čištění: Udržujte větrací otvory nástroje čisté, abyste zabránili přehřátí. Používejte měkký,amp cloth to wipe down the exterior. Do not use solvents.
• Kontrola příslušenství: Regularly inspect accessories for wear or damage. Replace worn or damaged accessories immediately.
• Kontrola kabelu: Check the power cord for any damage. If damaged, have it repaired by a qualified service technician.
• Skladování: Store the tool and accessories in the provided case in a dry, secure location out of reach of children.

7. Řešení problémů

If you encounter issues with your multi-tool, refer to the following common troubleshooting steps:

• Nástroj se nespustí:
  • Zkontrolujte, zda je napájecí kabel bezpečně zapojený do funkční zásuvky.
  • Ujistěte se, že je vypínač v poloze „ON“.
• Reduced performance or excessive vibration:
  • Check if the accessory is securely attached and not worn or damaged.
  • Ensure the correct accessory is being used for the material.
  • Clean any debris from the tool head and accessory.
• Přehřívání:
  • Ujistěte se, že větrací otvory jsou zbavené prachu a nečistot.
  • Vyhněte se nepřetržitému provozu s vysokou zátěží bez přestávek.

If the problem persists after attempting these steps, please contact HiKOKI customer service or an authorized service center.

8. Specifikace

9. Záruka a podpora

Your HiKOKI AC100V Multi-Tool CV350V2 comes with a standard manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions. For technical support, service, or replacement parts, please contact your local HiKOKI dealer or visit the official HiKOKI webmísto.

Online zdroje: For additional information, product updates, and a full range of accessories, please visit the official HiKOKI webmísto: www.hikoki-powertools.jp