Varmilo VPE87
Varmilo VPE87 Chang'e TKL Mechanical Keyboard User Manual
Model: VPE87
Zavedení
The Varmilo VPE87 TKL mechanical keyboard is designed for versatility and a premium typing experience. It features triple-mode connectivity (wired, Bluetooth, and 2.4 GHz wireless), hotswap sockets for switch customization, and a white LED backlight. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal use of your keyboard.
Obsah balení
- Varmilo VPE87 Mechanical Keyboard
- USB-C kabel
- 2.4 GHz Wireless Receiver (typically stored in keyboard)
- Stahovák kláves (může být součástí balení)
- Stahovák spínačů (může být součástí balení)
Nastavení
Before using your Varmilo VPE87 keyboard, please follow these steps to set it up.
1. Physical Connection and Initial Charge

Image: USB-C port and 3-way cord channel. The USB-C port is located on the back of the keyboard, designed to allow the cable to exit from the left, right, or center for tidy cable management.
- Připojte dodaný kabel USB-C k portu USB-C na klávesnici.
- Connect the other end of the USB-C cable to an available USB port on your computer or a USB power adapter.
- For wireless use, ensure the keyboard is sufficiently charged. The white LED backlight will indicate charging status (specific indicator behavior may vary, refer to LED section).
2. Nastavení úhlu klávesnice

Obrázek: Side profile with kickstand extended. The keyboard features a 2-step kickstand on the underside, allowing users to adjust the typing angle for ergonomic comfort.
The VPE87 features a 2-step kickstand on its underside. Gently flip out the kickstands to adjust the keyboard's angle to your preferred typing position.
Návod k obsluze
Režimy připojení
The Varmilo VPE87 supports three connectivity modes: Wired, Bluetooth, and 2.4 GHz Wireless. You can switch between modes using the dedicated switch or key combinations, typically located on the back or side of the keyboard.
Kabelový režim
- Připojte kabel USB-C z klávesnice k počítači.
- Klávesnice bude automaticky rozpoznána vaším operačním systémem.
- This mode also charges the keyboard's internal battery.
Režim Bluetooth
- Ensure the keyboard is in Bluetooth mode (check the switch on the back/side).
- Na svém zařízení (počítači, tabletu, chytrém telefonu) povolte Bluetooth a vyhledejte nová zařízení.
- Select "Varmilo VPE87" (or similar name) from the list of available devices.
- Follow any on-screen prompts to complete pairing. The keyboard may support multiple Bluetooth profiles (e.g., Fn + 1, 2, 3 for different devices). Refer to specific key combinations for your model.
Bezdrátový režim 2.4 GHz
- Locate the 2.4 GHz USB receiver (often stored in a compartment on the keyboard's underside).
- Zapojte USB přijímač do volného USB portu na vašem počítači.
- Ensure the keyboard is in 2.4 GHz wireless mode (check the switch on the back/side).
- Klávesnice by se měla automaticky připojit k přijímači.
Ovládání podsvícení

Image: Keyboard with white LED backlight. The white LED backlight enhances visibility of the keycaps, especially in low-light conditions.
The VPE87 features a white LED backlight. Use the following key combinations to control the backlight:
- Fn + Arrow Up: Zvyšte jas podsvícení.
- Fn + Arrow Down: Decrease backlight brightness / Turn off backlight.
- Fn + Other Keys: (Specific to model) May control backlight effects or modes. Refer to the keyboard's keycap legends for additional functions.
Hotswap Sockets (Switch Customization)

Obrázek: Nahoře view of the Varmilo VPE87 keyboard. This image displays the keyboard's layout and the artistic design on its keycaps and case, highlighting its aesthetic appeal.
The VPE87 is equipped with hotswap sockets, allowing you to change mechanical switches without soldering. This enables customization of your typing feel.
- Odstranění krytky kláves: Pomocí stahováku na klávesy jemně odstraňte požadovanou klávesu.
- Odstraňte přepínač: Pomocí stahováku na spínače opatrně uchopte horní a spodní klipsny spínače a vytáhněte jej přímo nahoru.
- Vložit nový přepínač: Align the pins of the new switch with the holes in the hotswap socket. Gently push the switch straight down until it clicks into place. Ensure pins are not bent.
- Výměna krytky kláves: Nasaďte krytku kláves zpět na nový spínač.
Note: Ensure the keyboard is disconnected or powered off before swapping switches. Use compatible 3-pin or 5-pin mechanical switches.
Další funkce
- Double-layer Silicone Sound Absorption: This design minimizes typing noise for a quieter experience.
- 3-Way Cord Channel: The USB-C cable can be routed from the left, right, or center of the keyboard's underside for neat cable management.
Údržba
Proper maintenance ensures the longevity and performance of your Varmilo VPE87 keyboard.
- Čištění kláves:
- Use a keycap puller to remove keycaps.
- Wipe keycaps with a damp hadříkem a jemným mýdlovým roztokem. Vyhněte se agresivním chemikáliím.
- Ensure keycaps are completely dry before reattaching.
- Čištění těla klávesnice:
- K otření povrchu klávesnice použijte měkký, suchý hadřík.
- Pro odstranění prachu a nečistot mezi klávesami použijte stlačený vzduch.
- Skladování: Klávesnici skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
- Rozlití kapaliny: In case of a liquid spill, immediately disconnect the keyboard, turn it upside down to drain, and allow it to dry completely for at least 24-48 hours before attempting to use it again. Do not use a hairdryer or heat gun.
Odstraňování problémů
If you encounter issues with your Varmilo VPE87 keyboard, try the following solutions:
| Problém | Řešení |
|---|---|
| Keyboard not responding in Wired Mode. |
|
| Nelze se připojit přes Bluetooth. |
|
| 2.4 GHz wireless connection is unstable or not working. |
|
| Backlight is not working or dim. |
|
| A specific key is not registering. |
|
Specifikace
| Funkce | Detail |
|---|---|
| Značka | Varmilo |
| Model | VPE87 |
| Popis klávesnice | Mechanické |
| Technologie připojení | Bluetooth, USB-C (Wired), 2.4 GHz Wireless |
| Počet klíčů | 87 |
| Podsvícení | White LED (Single Color) |
| Speciální funkce | Backlit, Wireless connectivity, Hotswap Sockets, 2-step Kickstand, Double-layer Silicone Sound Absorption, 3-way Cord Channel |
| Kompatibilní zařízení | Notebook, PC, Smartphone, Tablet |
| Color (Switches) | Kailh Prestige Clicky (as per product listing) |
Záruka a podpora
Varmilo products are designed for quality and durability. For specific warranty information, please refer to the warranty card included with your product or visit the official Varmilo webmísto.
For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Varmilo customer service through their official channels. You can often find support contact information on the brand's official webwebu nebo prostřednictvím prodejce, u kterého jste produkt zakoupili.
Visit the official Varmilo Store for more information: Obchod Varmilo na Amazonu
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.