Peg Perego IKAC0038--IN34

Návod k obsluze stavebnice Peg Perego Tatamia

Model: IKAC0038--IN34

Zavedení

The Peg Perego Tatamia Kit is designed to enhance the comfort and entertainment for your child when using the Tatamia high chair. This accessory kit includes a soft-touch seat cover and an engaging play center, making meal times and play times more enjoyable.

This manual provides essential information for the proper assembly, use, maintenance, and troubleshooting of your Tatamia Kit.

Peg Perego Tatamia Kit with green seat cover and colorful play bar attached to a high chair.

Image: The Peg Perego Tatamia Kit, featuring a light green soft seat cover and a vibrant play bar with hanging toys, installed on a high chair.

Obsah balení

Před zahájením montáže se ujistěte, že jsou k dispozici všechny komponenty:

  • 1 x Soft-Touch Seat Cover (Verde - Light Green)
  • 1 x Play Bar with attached toys

Bezpečnostní informace

Always prioritize your child's safety. Read and understand all instructions before use.

  • Ensure the kit is securely attached to the Peg Perego Tatamia high chair before placing your child in it.
  • Nikdy nenechávejte dítě bez dozoru v dětské jídelní židličce.
  • Regularly inspect the seat cover and play bar for any signs of wear, damage, or loose parts. Discontinue use if any damage is found.
  • Udržujte malé části a obalové materiály mimo dosah dětí, abyste předešli nebezpečí udušení.
  • The play bar is for entertainment only and should not be used as a handle or for lifting the high chair.

Pokyny pro nastavení

  1. Rozbalte komponenty: Carefully remove the seat cover and play bar from their packaging.
  2. Install Soft-Touch Seat Cover:
    • Ensure your Tatamia high chair is clean and dry.
    • Drape the seat cover over the high chair seat, aligning the openings for the harness straps and the seat belt buckle.
    • Thread the high chair's harness straps and buckle through the corresponding openings in the seat cover. Ensure the cover fits snugly and smoothly over the entire seat.
  3. Attach Play Bar:
    • Locate the attachment points on the sides of your Tatamia high chair, typically near the armrests.
    • Align the ends of the play bar with these attachment points.
    • Press firmly until you hear a click, indicating the play bar is securely locked into place. Gently pull on the play bar to confirm it is stable and cannot be easily dislodged.
Close-up of the Peg Perego Tatamia Kit's play bar with hanging toys, showing the attachment mechanism on a high chair.

Obrázek: Podrobný view of the play bar, highlighting its colorful design and the secure attachment points to the high chair frame.

Návod k obsluze

  • Using the Seat Cover: The soft-touch seat cover provides additional comfort for your child. It is designed to be used with the high chair's existing harness system. Always secure your child with the high chair's harness when using the seat cover.
  • Using the Play Bar: The play bar is designed to entertain your child. The hanging toys can be moved and interacted with. Ensure the play bar is always securely attached before allowing your child to play with it.

Údržba

  • Seat Cover Cleaning: The seat cover is made of 100% Polyester. It can be spot cleaned with a damp cloth and mild soap. For deeper cleaning, refer to the care label on the seat cover for specific washing instructions. Allow to air dry completely before reattaching to the high chair.
  • Play Bar Cleaning: Wipe the play bar and toys with a damp cloth and mild soap. Do not immerse the play bar in water.
  • Skladování: Pokud sadu nepoužíváte, skladujte ji na čistém a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.

Odstraňování problémů

  • Play Bar Not Attaching Securely:
    • Ensure the high chair's attachment points are clear of obstructions.
    • Verify that the play bar is correctly aligned with the attachment points. Apply firm, even pressure until it clicks into place.
  • Seat Cover Does Not Fit:
    • This kit is specifically designed for the Peg Perego Tatamia high chair. Ensure you are using the correct high chair model.
    • Adjust the cover to ensure all edges are properly aligned and smoothed out.

Specifikace

FunkceDetail
Číslo modeluIKAC0038--IN34
Rozměry produktu8 x 12.5 x 29 palce
Hmotnost položky1.89 libry
Typ materiáluPolyester
Materiálové složení100% Polyester
Doporučená maximální hmotnost45 Pounds (for high chair, not kit itself)
BarvaVerde (Light Green)
Je přenosnýAno

Záruka a podpora

For warranty information, product support, or to purchase replacement parts, please contact Peg Perego customer service directly. Refer to the official Peg Perego webNejnovější kontaktní údaje naleznete na webu nebo na obalu produktu.

Webmísto: www.pegperego.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.