BIWIBON Fingerprint Door Lock User Manual

Zavedení

Thank you for choosing the BIWIBON Fingerprint Door Lock. This smart door knob offers advanced security and convenience with multiple unlocking methods, including fingerprint, mobile app, IC cards, password, and traditional keys. This manual provides detailed instructions for installation, setup, operation, and maintenance to ensure optimal performance and security.

Bezpečnostní informace

• Nepokoušejte se zámek rozebírat ani opravovat sami. O servis se obraťte na kvalifikovaný personál.
• Keep mechanical backup keys in a secure location outside the property.
• Ensure the door is properly aligned and closes smoothly before installation to prevent damage to the lock mechanism.
• Use only specified AAA alkaline batteries. Do not mix old and new batteries or different types of batteries.
• Nevystavujte zámek přímému slunečnímu záření, dešti nebo korozivním látkám.

Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• Front Handle Assembly (with fingerprint sensor and keypad)
• Back Handle Assembly (with battery compartment)
• Jedna západka
• Úderová deska
• 2 Mechanical Backup Keys
• 2 IC karty
• Square Cotter
• 2 Spiral Tubes
• Šrouby (různé velikosti)
• Uživatelská příručka (tento dokument)

Průvodce instalací

The BIWIBON Fingerprint Door Lock is designed for easy installation on most standard US doors. No additional drilling is typically required for standard door preparations.

1. Připravte dveře

Ujistěte se, že vaše dveře splňují následující specifikace:

• Tloušťka dveří: 35 mm–55 mm (1.38"–2.17")
• Zadní část: 60mm-70mm (2-3/8"-2-3/4")
• Průměr příčného otvoru: 54 mm (2-1/8")

2. Nainstalujte západku

1. Insert the single latch into the door edge. Ensure the latch bolt faces the correct direction (beveled edge towards the door frame).
2. Secure the latch with the provided screws.

3. Install the Front Handle

1. Feed the cable from the front handle through the cross bore hole.
2. Align the square cotter with the latch mechanism.
3. Position the front handle assembly on the exterior side of the door.

4. Install the Back Handle

1. Connect the cable from the front handle to the port on the back handle assembly.
2. Align the back handle with the square cotter and the mounting holes.
3. Secure the back handle to the front handle using the spiral tubes and screws. Do not overtighten.

5. Nainstalujte baterie

1. Open the battery cover on the back handle.
2. Insert 4 new AAA alkaline batteries, ensuring correct polarity.
3. Close the battery cover. The lock will emit a sound indicating it is powered on.

6. Nainstalujte protiplech

1. Align the strike plate with the latch bolt on the door frame.
2. Secure the strike plate with the provided screws.

Nastavení a programování

After installation, configure your lock using the mobile application.

1. Download and Pair the App

1. Stáhněte si aplikaci „Tuya Smart“ nebo „Smart Life“ z obchodu s aplikacemi ve vašem chytrém telefonu.
2. Vytvořte si účet nebo se přihlaste.
3. Follow the in-app instructions to add your new door lock. Ensure Bluetooth is enabled on your phone and you are near the lock.

2. Add Fingerprints

1. In the app, navigate to the lock settings and select "Fingerprint Management."
2. Follow the prompts to register new fingerprints. You will be asked to place your finger on the sensor multiple times from different angles.

3. Set Passcodes

1. From the app, select "Password Management."
2. You can create permanent, timed, or one-time passcodes.
3. Enter your desired passcode on the lock's keypad to test it after creation.

4. Register IC Cards

1. In the app, go to "IC Card Management."
2. Select "Add Card" and then tap the IC card against the designated area on the lock (usually near the keypad or fingerprint sensor).

Návod k obsluze

Metody odemykání

• otisk: Place your registered finger on the sensor. The lock will unlock if recognized.
• přístupový kód: Enter your 6-8 digit passcode on the keypad, followed by '#'.
• IC karta: Tap a registered IC card against the sensor area.
• Mobilní aplikace: Otevřete aplikaci, vyberte zámek a klepněte na ikonu odemknutí.
• Záložní klíč: Vložte mechanický klíč do klíčové dírky a otočením odemkněte.

Pokročilé funkce

• Heslo proti odposlouchávání: When entering your passcode, you can input random digits before and after your actual code to obscure it from onlookers. Example: [Random Digits] + [Your Passcode] + [Random Digits].
• Režim průchodu: Activate this mode via the app to keep the door unlocked for a specified period, useful for gatherings or when frequent entry/exit is needed.
• Automatický zámek: The lock can be configured via the app to automatically lock after a set period (e.g., 5-30 seconds) once the door is closed.
• Remote Access (BIWIBON Gateway Required): With the optional BIWIBON Gateway (sold separately), you can remotely lock/unlock your door, generate temporary codes, and monitor access records from anywhere via Wi-Fi.

Údržba

• Výměna baterie: When the low battery alert sounds or is indicated in the app, replace all 4 AAA batteries promptly.
• Nouzové napájení: If batteries die completely, connect a power bank to the micro-USB port on the front handle for temporary power to unlock the door. This port is for emergency power only, not for charging internal batteries.
• Čištění: Wipe the lock surface and fingerprint sensor with a soft, dry cloth. Avoid abrasive cleaners or solvents.

Odstraňování problémů

Specifikace

Záruka a podpora

For warranty information, technical support, or assistance with your BIWIBON Fingerprint Door Lock, please refer to the contact information provided with your purchase or visit the official BIWIBON website. Additional protection plans may be available for purchase separately.