1. Úvod
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Pyhodi Electric Bike Lithium Modification Kit. This kit is designed to convert or upgrade electric bicycles with 36V or 48V systems, supporting 750W to 1000W motors. It includes a 30A 3-mode motor controller, an LCD M5 display panel, and a thumb throttle.
Před instalací a použitím si prosím pečlivě přečtěte tento návod k obsluze, abyste zajistili správnou funkci a bezpečnost.
2. Bezpečnostní pokyny
- Always disconnect the battery before performing any installation, maintenance, or repair work on the electric bike system.
- Ujistěte se, že všechna připojení jsou bezpečná a řádně izolovaná, aby se zabránilo zkratu.
- Do not attempt to modify the controller or display unit. Unauthorized modifications can lead to system failure or injury.
- Keep all electrical components away from water and moisture.
- Během instalace používejte vhodné ochranné pomůcky, včetně rukavic a ochrany očí.
- Pokud si nejste jisti jakoukoli částí instalačního procesu, poraďte se s kvalifikovaným technikem.
3. Obsah balení
Ověřte, zda jsou v balení přítomny všechny níže uvedené položky:
- 1 x 30A 3-Mode Motor Controller
- 1 x LCD M5 Display Panel
- 1 x Thumb Throttle
- 1 x Pedal Assist Sensor (PAS)
- Kabelové svazky a konektory
Image: All components of the Pyhodi Electric Bike Lithium Modification Kit, including the controller, LCD M5 display, thumb throttle, and pedal assist sensor.
4. Specifikace
| Komponent | Specifikace |
|---|---|
| Ovladač motoru | 30A, 3 Modes (Sine Wave), 36V/48V Universal, Supports 750W-1000W Motors |
| Zobrazovací panel | LCD M5 Display |
| Plyn | Thumb Throttle |
| Senzor pomocného pedálu (PAS) | V ceně |
| Hmotnost položky | Přibližně 1.81 libry (0.82 kg) |
| Rozměry balení | 8.27 x 5.51 x 4.33 palce (21 x 14 x 11 cm) |
5. Nastavení a instalace
Installation of this kit requires basic electrical knowledge and mechanical skills. If you are not confident in your ability to install these components, it is recommended to seek professional assistance.
5.1 Obecné zapojeníview
The controller acts as the central hub for the electric bike system. It connects to the battery, motor, display, throttle, and PAS sensor. Ensure each connector is matched correctly and securely fastened.
Image: The brushless DC motor controller showing its multiple color-coded wiring harnesses for various connections.
5.2 kroky instalace
- Montáž ovladače: Securely mount the motor controller to the bicycle frame in a location protected from water and physical damage.
- Připojení motoru: Connect the motor phase wires (usually three thick wires) and Hall sensor wires (usually five thin wires) from your motor to the corresponding connectors on the controller. Match colors carefully.
- Připojte baterii: Connect the battery power cables (red for positive, black for negative) to the main power input on the controller. Ensure correct polarity.
- Install and Connect the Display: Mount the LCD M5 display panel on the handlebars. Connect its wiring harness to the designated display port on the controller.
- Install and Connect the Throttle: Mount the thumb throttle on the handlebars. Connect its wiring harness to the throttle port on the controller.
- Install and Connect the PAS Sensor: Install the pedal assist sensor on the crank arm according to its specific instructions. Connect its wiring harness to the PAS port on the controller.
- Connect Brake Levers (if applicable): If your brake levers have cut-off sensors, connect them to the brake sensor ports on the controller.
- Zabezpečení všech připojení: Dvakrát zkontrolujte těsnost a správnou izolaci všech spojů. Použijte stahovací pásky nebo kabelové omotávky, abyste úhledně uspořádali vodiče a zabránili jejich zachycení.
6. Návod k obsluze
6.1 Zapnutí/vypnutí
To power on the system, press and hold the power button on the LCD M5 display for a few seconds. To power off, repeat the action.
Image: The LCD M5 display panel, showing the screen and control buttons for operating the electric bike system.
6.2 LCD M5 Display Functions
- Zobrazení rychlosti: Shows current speed, average speed, and max speed.
- Úroveň baterie: Zobrazuje zbývající nabití baterie.
- Úroveň pomoci: Displays the current pedal assist level (usually 0-5). Use the '+' and '-' buttons to adjust.
- Počítadlo kilometrů/cestná vzdálenost: Shows total distance traveled or current trip distance.
- Kódy chyb: Displays specific codes if a system fault occurs. Refer to the troubleshooting section.
- Nabídka nastavení: Access various parameters like wheel size, speed limit, and battery voltage through the settings menu (refer to the display's specific manual for detailed navigation).
6.3 Používání škrticí klapky
The thumb throttle provides on-demand power from the motor, allowing you to accelerate without pedaling. Gently press the lever with your thumb to engage the motor. Release the lever to disengage. Use the throttle responsibly and be aware of your surroundings.
Obrázek: Detailní záběr view of the thumb throttle, designed for easy control of motor power.
7. Údržba
- Pravidelná kontrola: Periodically check all wiring connections for looseness or damage. Ensure connectors are clean and dry.
- Čištění součástí: Wipe down the controller, display, and throttle with a soft, damp tkanina. Nepoužívejte agresivní chemikálie nebo abrazivní čisticí prostředky.
- Ochrana vody: While components are generally splash-proof, avoid submerging them in water or exposing them to heavy rain for extended periods.
- Správa kabelů: Ensure all cables are neatly routed and secured to prevent them from getting caught or damaged during riding.
- Péče o baterie: Although the battery is not part of this kit, proper battery maintenance (charging, storage) is crucial for the overall system's longevity. Refer to your battery's specific manual.
8. Řešení problémů
If you encounter issues, perform the following basic checks before seeking further assistance:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Systém se nezapne | Battery not charged, loose battery connection, faulty display connection | Check battery charge, ensure battery is securely connected, verify display cable connection. |
| Motor nereaguje na plyn/PAS | Loose motor/throttle/PAS connections, brake cut-off engaged, motor/controller fault | Check all motor, throttle, and PAS connections. Ensure brake levers are not engaged. Check for error codes on the display. |
| Displej zobrazuje chybový kód | Specific system fault (e.g., motor Hall sensor error, controller overcurrent) | Consult the M5 display manual for specific error code meanings. Often requires checking the indicated component's connection or replacing a faulty part. |
| Nekonzistentní dodávka energie | Loose connections, intermittent sensor fault, low battery voltage | Inspect all connections. Ensure battery is adequately charged. Check PAS sensor for proper alignment and function. |
V případě problémů, které se vám nepodaří vyřešit pomocí těchto kroků, kontaktujte prosím zákaznickou podporu.
9. Záruka a podpora
Pyhodi products are manufactured with quality and reliability in mind. For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your retailer.
For technical support, troubleshooting assistance beyond this manual, or inquiries regarding replacement parts, please contact Pyhodi customer service through the platform where the product was purchased. Please have your product model and purchase date available when contacting support.