Walfront MKS TinyBee V1.0 3D Printer Control Board Instruction Manual

1. Konec produktuview

The MKS TinyBee V1.0 is a versatile 3D printer control board designed for enhanced performance and wide compatibility. It integrates an ESP32-WROOM-32U module, featuring a dual-core 32-bit high-speed MCU operating at up to 240MHz. This board supports Marlin 2.0 firmware and offers connectivity options including network and web page control for your 3D printer.

Mezi klíčové vlastnosti patří:

• Široká kompatibilita: Supports various LCD screens (LCD2004, 12864, MKS MINI12864 V3, MKS TFT serial port screens).
• Vysoký výkon: Equipped with ESP32-WROOM-32U module, dual-core 32-bit LX6 microprocessor, 8MB Flash, and 520KB RAM.
• Integrovaná konektivita: Built-in Wi-Fi and Bluetooth modules for advanced control.
• Snadné aktualizace firmwaru: Firmware can be updated conveniently via USB.
• Kompaktní design: Lehký a kompaktní pro snadnou instalaci.

Image 1: MKS TinyBee V1.0 3D Printer Control Board shown with a 3D printer.

2. Nastavení a instalace

This section provides guidance on installing and connecting your MKS TinyBee V1.0 control board. Please refer to the detailed diagram for component identification and connection points.

Image 2: Detailed diagram of the MKS TinyBee V1.0 control board with labeled connection points.

2.1 Identifikace součásti

Before installation, familiarize yourself with the board's layout:

• Ovladače motorů: X-Motor, Y-Motor, Z1-Motor, Z2-Motor, E0-Motor, E1-Motor.
• Koncové zastávky: X, Y, Z, MT_DET.
• Napájení: DC 12-24V input.
• Vyhřívaná postel: Connection for heated bed.
• Extruder Thermals: Extruder 1 thermal, Extruder 2 thermal.
• Fan Interfaces: Fan, E1 interface, E0 interface.
• Rozhraní LCD: EXP1, EXP2 for LCD screens.
• Rozhraní USB typu C: For firmware updates and communication.
• Slot na kartu TF: For storing G-code files.
• 3D Touch Control: Dedicated interface.
• Detekce vlákna: Interface for filament runout sensor.
• USART2: Reserved for MKS TFT series screens.

2.2 Postup připojení

Follow these steps to connect the board to your 3D printer:

1. Napájení: Connect your DC 12-24V power supply to the designated power input terminals. Ensure correct polarity.
2. Připojení motoru: Connect the X, Y, Z, E0, and E1 motors to their respective motor driver slots.
3. Koncové zastávky: Connect the X, Y, and Z end stop switches to their corresponding pins.
4. Heated Bed & Extruder: Connect the heated bed and extruder heating elements, along with their thermistors, to the appropriate terminals.
5. Fanoušci: Connect cooling fans to the fan interfaces as needed.
6. LCD obrazovka: Connect your compatible LCD screen (e.g., MKS MINI12864 V3 or MKS TFT) to the EXP1/EXP2 or USART2 interfaces.
7. Volitelná připojení: Connect 3D Touch sensors, filament detection sensors, or other accessories to their dedicated interfaces.

Image 3: General connection guidance for the MKS TinyBee V1.0 board.

2.3 Aktualizace firmwaru

The MKS TinyBee V1.0 supports firmware updates via its USB Type-C interface. Connect the board to your computer using a USB cable and follow the instructions provided with the Marlin 2.0 firmware for ESP32-based boards.

3. Návod k obsluze

Once the MKS TinyBee V1.0 control board is correctly installed and powered, you can operate your 3D printer using a compatible LCD screen or through network/web page control.

3.1 Basic Operation via LCD

Navigate through the menus on your connected LCD screen to perform basic operations such as:

• Loading G-code files z karty TF.
• Initiating prints.
• Monitoring print progress.
• Adjusting temperatures (hotend, heated bed).
• Controlling motor movements (homing, jogging).

Image 4: MKS TinyBee V1.0 board supporting various LCD display types.

3.2 Network and Web Řízení

Leverage the integrated Wi-Fi module to connect your 3D printer to a network. This allows for remote control and monitoring via web pages, offering greater flexibility in managing your print jobs.

4. Údržba

To ensure the longevity and optimal performance of your MKS TinyBee V1.0 control board, follow these maintenance guidelines:

• Udržujte v čistotě: Regularly clean the board to prevent dust accumulation, which can lead to overheating or short circuits. Use a soft brush or compressed air.
• Zabezpečená připojení: Periodically check all wire connections to ensure they are secure and free from corrosion. Loose connections can cause intermittent issues or damage.
• Správné větrání: Ensure the control board is installed in an environment with adequate ventilation to dissipate heat effectively.
• Aktualizace firmwaru: Keep the firmware updated to the latest stable version to benefit from bug fixes and new features.
• Bezpečné vypnutí: Always power off the 3D printer and disconnect the power supply before performing any maintenance or making changes to the wiring.

5. Řešení problémů

This section addresses common issues you might encounter with your MKS TinyBee V1.0 control board.

5.1 Board Not Powering On

If the board does not power on:

• Zkontrolujte napájení: Verify that the power supply is connected correctly and providing the specified DC 12-24V. Ensure the power supply itself is functional.
• Zkontrolujte kabeláž: Double-check all power connections for proper polarity and secure contact.
• Napájení USB: If powering via USB, ensure the USB power jumper is correctly set (if applicable) and the USB cable is functional.
• Pojistky: Inspect any onboard fuses for signs of being blown. If a fuse is blown, replace it with one of the same rating.

5.2 Motors Not Moving

If motors are not responding:

• Připojení motoru: Ensure all motor cables are securely connected to the board and the motors.
• Konfigurace ovladače: Verify that the stepper drivers are correctly installed and configured (e.g., microstep settings via dial switches).
• Firmware Settings: Check your Marlin firmware configuration for correct motor assignments and steps per millimeter.

5.3 Problémy se zobrazením

If the LCD screen is not displaying correctly:

• Připojení kabelů: Ensure the display cables (EXP1, EXP2, or serial port) are correctly and securely connected to both the board and the display.
• Podpora firmwaru: Confirm that your firmware is configured to support the specific type of LCD screen you are using.

6. Specifikace

Detailed technical specifications for the MKS TinyBee V1.0 control board:

Image 5: Product parameter table for MKS TinyBee V1.0.

6.1 Fyzické rozměry a hmotnost

• Rozměry balení: 6.54 x 5.47 x 2.09 palce
• Hmotnost položky: 5.6 unce (0.16 kilogramů)

Image 6: Dimensional drawing of the MKS TinyBee V1.0 control board.

7. Záruka a podpora

For warranty information, technical support, or further assistance with your Walfront MKS TinyBee V1.0 3D Printer Control Board, please contact Walfront customer service or visit the official Walfront store. Ensure you retain your proof of purchase for any warranty claims.

You can visit the Walfront Store for more information: Walfront Store on Amazon