Surge SG20028

Surge PS5 PowerPack 2.0 User Manual

Brand: Surge | Model: SG20028

Zavedení

The Surge PS5 PowerPack 2.0 is designed to extend the battery life of your PlayStation 5 DualSense and DualSense Edge controllers. With a large 1,600mAh capacity, it ensures you stay powered during extended gaming sessions. Its compact design seamlessly attaches to the back of your controller without affecting ergonomics, and the included 10ft braided cable allows for comfortable play and charge functionality.

Obsah balení

  • 1x Surge PS5 PowerPack 2.0 (1,600mAh Battery Pack)
  • 1x 10ft Braided Charge Cable (USB-A to USB-C)
Surge PS5 PowerPack 2.0 attached to a white PlayStation 5 DualSense controller, with the included 10ft braided charge cable next to it.

Image: Surge PS5 PowerPack 2.0 and its braided charge cable.

Nastavení

Attaching the PowerPack

  1. Ensure your PlayStation 5 DualSense or DualSense Edge controller is clean and free of debris.
  2. Align the PowerPack with the top of your controller, ensuring the USB-C connector on the PowerPack aligns with the charging port on your controller.
  3. Gently press the PowerPack onto the controller until it clicks securely into place. It should fit snugly without obstructing any buttons or ports.
Surge PS5 PowerPack 2.0 attached to a black and white PlayStation 5 DualSense Edge controller, viewed shora.

Image: PowerPack attached to a DualSense Edge controller.

Initial Charging of the PowerPack

Before first use, it is recommended to fully charge the PowerPack. Connect the included 10ft braided charge cable to the USB-C port on the PowerPack and the other end to a USB-A power source (e.g., PS5 console, USB wall adapter). The LED indicators on the PowerPack will illuminate to show charging status.

Close-up of the Surge PS5 PowerPack 2.0 showing its USB-C port and four blue LED indicator lights.

Image: PowerPack with LED indicators.

Návod k obsluze

Nabíjení ovladače

Once the PowerPack is attached and charged, it will automatically begin charging your connected DualSense or DualSense Edge controller. The PowerPack supports "Play & Charge" functionality, meaning you can continue to use your controller while it is being charged by the PowerPack or by the included braided cable connected to the PowerPack.

A white PlayStation 5 DualSense controller with the Surge PowerPack 2.0 attached, and the 10ft braided charge cable plugged into the PowerPack.

Image: Play & Charge setup with PowerPack and cable.

Indikátory stavu baterie

The PowerPack features four LED lights that indicate its remaining battery capacity:

  • Čtyři LED diody: Nabito 75 % - 100 %
  • Tři LED diody: Nabito 50 % - 75 %
  • Dvě LED diody: Nabito 25 % - 50 %
  • Jedna LED: 0% - 25% charged (Recharge soon)

Údržba

To ensure the longevity and optimal performance of your Surge PS5 PowerPack 2.0, follow these maintenance guidelines:

  • Keep the PowerPack and cable clean by wiping with a soft, dry cloth.
  • Nevystavujte zařízení extrémním teplotám, přímému slunečnímu záření nebo vlhkosti.
  • Pokud se nepoužívá, skladujte na chladném a suchém místě.
  • Do not attempt to disassemble or modify the PowerPack.

Odstraňování problémů

ProblémMožná příčinaŘešení
PowerPack or Controller not charging / Controller battery remains low after charging.
  • PowerPack is not fully charged.
  • Loose connection between PowerPack and controller, or cable and PowerPack.
  • Vadný nabíjecí kabel nebo zdroj napájení.
  • PowerPack not properly attached to the controller.
  • Ensure the PowerPack itself is fully charged (all four LEDs illuminated).
  • Verify that the PowerPack is securely attached to the controller and the charging cable is firmly plugged into both the PowerPack and the power source.
  • Try using a different USB-A to USB-C cable or a different USB power source to rule out cable or adapter issues.
  • Remove and re-attach the PowerPack to the controller, ensuring a solid connection.
PowerPack LEDs are not lighting up.
  • PowerPack is completely drained.
  • Problém s nabíjecím kabelem nebo zdrojem napájení.
  • Connect the PowerPack to a known working power source using the included cable and allow it to charge for at least 30 minutes.
  • Test the charging cable and power source with another device if possible.

Specifikace

FunkceDetail
Kapacita baterie1,600mAh lithium-iontová
KompatibilitaPlayStation 5 DualSense & DualSense Edge Controllers
Délka nabíjecího kabelu10 stop (3 metrů)
Číslo modeluSG20028
Rozměry balení6.57 x 4.41 x 2.09 palce
Hmotnost položky6.74 unce
VýrobcePřepětí
Země původuČína

Záruka a podpora

For warranty information or technical support regarding your Surge PS5 PowerPack 2.0, please refer to the official Surge webnebo se obraťte přímo na jejich zákaznický servis. Uschovejte si doklad o koupi pro případné reklamace.

Zdroje podpory a kontaktní informace často najdete na oficiálních stránkách výrobce webmísto: Visit the Surge Store on Amazon

© 2024 Surge. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.