Návod k obsluze RC vozu HAIBOXING 16890SA v měřítku 1/16, 4x4, bezkartáčový pohon

Zavedení

This manual provides essential information for the setup, operation, and maintenance of your HAIBOXING 16890SA 1/16 Scale 4WD Brushless RC Truck. Please read this manual thoroughly before operating the vehicle to ensure proper function and safety.

Image: The HAIBOXING 16890SA 1/16 Scale 4WD Brushless RC Truck.

Bezpečnostní informace

Důležitá bezpečnostní opatření:

• Disconnect and remove the battery pack from the vehicle when not in use. This prevents potential damage from a leaking rechargeable battery pack.
• To prolong battery life, avoid completely draining the battery. Fully charge the battery pack before each use.
• Do not leave the battery pack uncharged for extended periods.
• Store the battery pack in a dry, clean, and cool environment.
• This is a model-grade product. Read the user manual carefully before use to avoid potential damage, loss of control, or safety hazards.

Co je v krabici

Po vybalení zkontrolujte, zda jsou všechny komponenty přítomny:

• Dálkové ovládání
• 7.4V (2S) 1200mAh Li-Po Batteries (Two included; one pre-installed in vehicle, one in box)
• Produktový manuál
• USB Charging Cables (Two included)
• Šroubovák
• Paddle Tires (x4)
• Body Decals
• Wheelie Bar
• Malý křížový klíč
• Wheel Hex. Pins (x6)
• M4 pojistné matice (x6)
• Body Clips (x4)
• Bind Plug

Obrázek: Overview of the HAIBOXING 16890SA RC Truck and its included accessories.

Komponenty skončilyview

Brushless Motor and Drivetrain

The HAIBOXING 16890SA is equipped with a 2840 3800KV brushless motor, providing efficient power delivery. The drivetrain features premium powdered metallurgy gears, metal universal driveshafts, and reinforced PA material for durability and high-speed performance.

Image: The HAIBOXING 16890SA RC Truck demonstrating its speed, highlighting the brushless motor and 4x4 off-road capabilities.

Podvozek a zavěšení kol

The refined 4WD chassis includes front and rear independent suspension and full-metal oil-filled shocks for superior handling across various terrains. Ball bearings and metal ball studs are integrated throughout the drivetrain and moving joints for smooth operation.

Obrázek: Podrobný view of the HAIBOXING 16890SA's internal components, showcasing the 4WD drivetrain, aluminum body threaded oil-filled shocks, and metal gears.

Elektronický systém

The 2.4GHz remote control system provides a range of up to 330 feet. The electronic system features a separate receiver and a Hobbywing brushless ESC (Electronic Speed Controller) with water-resistant and thermal protection. It also includes motor anti-jam safeguards and low voltage alert indication.

Body and Tires

The vehicle features a flexible 1mm thick PVC body and includes animated DIY decals for customization. It comes with sponge-inserted off-road tires and optional paddle tires, suitable for snowy and sandy surfaces. A wheelie bar is provided to enhance stability during rapid acceleration.

Image: Close-up details of the HAIBOXING 16890SA, showing the separate ESC and receiver, paddle tires for sand, aluminum oil-filled shocks, and the optional wheelie bar.

Nastavení

Instalace baterie

Baterie vozidla: The HAIBOXING 16890SA uses a 7.4V (2S) 1200mAh Li-Po battery. One battery is typically pre-installed. Ensure it is securely connected.

Baterie do dálkového ovládání: The remote control requires AA batteries (not included). Open the battery compartment on the remote and insert the batteries according to the polarity indicators.

Nabíjení baterií

Use the provided USB charging cables. Connect the cables to a compatible USB power adapter (rated at 5V, 2A or lower, not included). Connect the other end to the Li-Po batteries. The two included USB cables allow for simultaneous charging of both batteries.

Pozor:

• Během nabíjení vždy dohlížejte na baterie.
• Nenabíjejte poškozené nebo nafouklé baterie.
• Charge batteries on a non-flammable surface away from combustible materials.

Throttle Range Calibration (ESC Setup)

To ensure the ESC (Electronic Speed Controller) matches the throttle range of your transmitter, calibration is necessary. This procedure should be performed when using a new ESC, a new transmitter, or after adjusting EPA/ATV parameters.

1. Příprava vysílače: Switch off the ESC. Turn on the transmitter. Set the throttle channel direction to "forward" and "reverse". Disable the "ABS" brake function on your transmitter.
2. Vstupte do kalibračního režimu: Hold the "SET" button on the ESC. While holding, switch on the ESC. Release the "SET" key immediately once the red LED begins to flash.
3. Set Three Points: Follow the visual cues from the ESC's LED indicators to set the three throttle points:
   • Neutral Point: With the throttle trigger at neutral, press the "SET" button. The green LED will flash once.
   • End Point of Forward Direction: Pull the throttle trigger to its maximum forward position, then press the "SET" button. The green LED will flash twice.
   • End Point of Backward Direction: Push the throttle trigger to its maximum backward position, then press the "SET" button. The green LED will flash three times.
4. Dokončení: Once the calibration process is finished, the motor will start after 3 seconds.

Poznámka:

If you do not release the "SET" key after the red LED begins to flash, the ESC will enter program mode. In such a case, switch off the ESC and re-calibrate the throttle range from step A to D.

Image: Visual guide for calibrating the ESC throttle range, showing transmitter positions and corresponding LED feedback.

Návod k obsluze

Základní ovládací prvky

• Spoušť plynu: Pull the trigger towards you to accelerate forward. Push the trigger away from you to brake, and push again for reverse.
• Volant: Otáčením volantu doleva nebo doprava ovládáte směr vozidla.

Tipy pro řízení

• Start with gentle throttle inputs to familiarize yourself with the vehicle's response.
• Practice steering in open areas before attempting more complex maneuvers.
• The vehicle is designed for all terrains. Adjust your driving style based on the surface (e.g., loose dirt, grass, sand).

Speed Performance

With the included 7.4V (2S) Li-Po batteries, the truck can reach speeds over 28 mph (45 km/h). For increased performance, equipping the vehicle with a 3S battery (not included) can enable speeds surpassing 40 mph (64 km/h).

Údržba

Čištění

• After each use, especially in dirty or wet conditions, clean the vehicle to remove dirt, dust, and debris.
• K čištění těžko přístupných míst použijte měkký kartáč nebo stlačený vzduch.
• Wipe down the body and chassis with a damp cloth. Ensure all electronic components are dry before storage or next use.

Inspecting Components

• Regularly check for loose screws, damaged parts, or worn tires.
• Zkontrolujte součásti zavěšení kol, hnací hřídele a převody, zda nevykazují známky opotřebení nebo poškození.
• Ensure battery connectors are clean and free from corrosion.

Skladování

• Vozidlo skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
• Remove batteries from both the vehicle and the remote control before long-term storage.
• Skladujte Li-Po baterie při skladovacím objemutage (typically around 3.8V per cell) to maintain their health.

Odstraňování problémů

Specifikace

• Rozměry produktu: 12 x 8.6 x 4.5 palce
• Hmotnost položky: 1.92 libry
• Číslo modelu položky: 16890 SA
• Výrobcem doporučený věk: 8 let a více
• Baterie: 1 Lithium Polymer battery required (included, 7.4V 1200mAh)
• Motor: 2840 3800KV bezkartáčový motor
• ESC: Hobbywing Brushless ESC (water-resistant, thermal protection)
• Systém dálkového ovládání: 2.4 GHz
• Top Speed (2S Battery): Over 28 mph (45 km/h)
• Top Speed (3S Battery, not included): Over 40 mph (64 km/h)

Image: Dimensions of the HAIBOXING 16890SA RC Truck, showing its length, width, and height.

Záruka a podpora

The HAIBOXING 16890SA includes a 3-Month Protection Plan for factory-defective RC parts. For warranty claims or technical support, please contact the seller via Amazon Messages for prompt service.