1. Úvod
This manual provides detailed instructions for the installation, operation, and maintenance of your SPORTARC SVP-688W WiFi Energy Meter. Please read this manual thoroughly before using the device to ensure safe and efficient operation. Keep this manual for future reference.
2. Konec produktuview
2.1 Klíčové vlastnosti
- LCD display for real-time viewing of current, voltage, leakage current, and total power (kWh).
- Adjustable protection settings for overvoltage, podpaltage, overcurrent, and leakage current.
- Adjustable overtemperature protection (for WiFi models only).
- Configurable reconnection time delay.
- Memory function: Retains kilowatt-hour data and protection settings even after power loss.
- Single-phase remote control capability.
- Compatible with Tuya power monitoring systems.
2.2 Komponenty produktu
Obrázek 1: Přední view of the SVP-688W WiFi Energy Meter. This image displays the device's LCD screen, which shows voltage, current, power, and leakage readings, along with the 'SET', 'UP', 'DOWN', 'WIFI', and 'POWER' buttons.
Obrázek 2: Úhlové view of the SVP-688W. This perspective provides a clearer look at the LCD interface and the tactile buttons for configuration and control.
Obrázek 3: Strana view of the SVP-688W. This image illustrates the side profile, typically where electrical input and output terminals are located for wiring connections.
Obrázek 4: Zadní view of the SVP-688W. This view shows the mounting mechanism, such as DIN rail clips, and ventilation slots for heat dissipation.
3. Technické specifikace
| Parametr | Hodnota/Rozsah | Výchozí nastavení |
|---|---|---|
| Podpětítage Ochrana | 140-210 V (Adjustable) | 175 V |
| Přepětítage Ochrana | 240-300 V (Adjustable) | 275 V |
| Nadproudová ochrana | 1 A-63 A (Adjustable) | 63 A |
| Ochrana proti přehřátí | 10-85 °C (Adjustable for WiFi models, fixed 85 °C for non-WiFi) | N/A (Adjustable) |
| Reconnection Time Delay | 10s-99s (Adjustable) | 30s |
| Ochrana proti úniku | 10-99 mA (Adjustable) | 50 mA |
| Electricity Display Range | 0-99999.9 kWh | N/A |
| Rozměry | 12 x 10 x 7 cm | N/A |
| Číslo modelu | 1401882111 | N/A |
4. Nastavení a instalace
Důležité: Installation of this device should only be performed by a qualified electrician or professional. Ensure all power is disconnected from the main supply before beginning any installation work to prevent electric shock or damage to the device.
4.1 Pokyny pro zapojení
- Mount the SVP-688W device onto a standard DIN rail in your electrical panel.
- Connect the incoming live (L) and neutral (N) wires to the designated input terminals on the device.
- Connect the outgoing live (L) and neutral (N) wires to the load from the designated output terminals on the device.
- Ujistěte se, že všechny spoje jsou bezpečné a řádně izolované.
Zařízení je určeno pro jednofázové elektrické systémy.
5. Provoz
5.1 Informace na LCD displeji
The LCD screen provides real-time data:
- V: svtage (Voltmeter)
- A: Current (Ammeter)
- kWh: Total Energy Consumption (Energy Meter)
- mA: Svodový proud
- PULS: Indication of energy consumption pulses
- WIFI: WiFi connection status indicator
- ÚNIK: Leakage protection status indicator
5.2 Nastavení parametrů
Na view and adjust the device parameters:
- View Data: Krátce stiskněte SOUBOR button to cycle through various data displays (e.g., voltage, current, kWh).
- Vstupte do konfiguračního režimu: Stiskněte a podržte SOUBOR button for 5 seconds to enter the configuration mode.
- Vyberte parametr: Once in configuration mode, press the SOUBOR button again to cycle through the adjustable parameters (e.g., Undervoltage, Overvoltage, Overcurrent, Leakage, Reconnection Time, Overtemperature).
- Adjust Setting: Použijte ▲ (Nahoru a ▼ (Down) buttons to adjust the value of the selected parameter.
- Uložit a odejít: The device will automatically save the settings after a few seconds of inactivity in configuration mode, or you can press and hold SOUBOR znovu k výstupu.
Refer to the 'Technical Specifications' section for default values and adjustable ranges for each parameter.
6. Údržba
The SPORTARC SVP-688W is designed for minimal maintenance. However, regular checks can ensure optimal performance and safety.
- Čištění: Gently wipe the device with a dry, soft cloth. Do not use abrasive cleaners or solvents. Ensure the device is powered off before cleaning.
- Kontroly připojení: Pravidelně kontrolujte kabeláž, abyste se ujistili, že je pevná a bez koroze.
- Aktualizace softwaru: For WiFi-enabled features, check the associated Tuya application for any available firmware updates to ensure the device operates with the latest features and security enhancements.
6.1 kWh Data Reset
The accumulated kWh value can be reset. Refer to the device's specific menu options or the Tuya app for instructions on how to clear the kWh data.
7. Řešení problémů
- Device Not Reconnecting After Leakage Trip: If the device trips three times consecutively due to leakage protection, it will enter a manual reset state. It will not automatically reconnect. This is a safety feature. The user must manually inspect the electrical system to identify and repair the cause of the leakage before manually resetting the device. Other protection types (overvoltage, podpaltage, overcurrent) will allow automatic reconnection for more than 99,999 times.
- Nesprávné čtení: Ensure all wiring connections are correct and secure. Verify that the device settings (e.g., current limits) are appropriate for your electrical system.
- Problémy s WiFi připojením: Check your router's internet connection. Ensure the device is within range of your WiFi network. Follow the pairing instructions in the Tuya app for reconnection.
- Zařízení se nezapíná: Verify that the main power supply is active and correctly connected to the device's input terminals.
8. Bezpečnostní informace
- Před instalací, servisem nebo čištěním zařízení vždy odpojte napájení hlavním jističem.
- Toto zařízení je určeno pouze pro použití v interiéru. Nevystavujte jej vlhkosti, přímému slunečnímu záření ani extrémním teplotám.
- Nepokoušejte se zařízení otevírat ani upravovat. Uvnitř nejsou žádné součásti, které by mohl uživatel opravit.
- Zajistěte správné uzemnění v souladu s místními elektrotechnickými předpisy.
- Udržujte zařízení mimo dosah dětí.
- In case of malfunction, disconnect power immediately and contact a qualified technician.
9. Záruka a podpora
For technical support, warranty inquiries, or service, please contact SPORTARC customer service through your point of purchase or the official SPORTARC website. Please have your model number (SVP-688W) and purchase information ready when contacting support.