AZZA Cube 360 360mm All-in-One CPU Liquid Cooler User Manual

Zavedení

This manual provides detailed instructions for the installation, operation, and maintenance of your AZZA Cube 360 360mm All-in-One (AIO) CPU Liquid Cooler. Please read this manual thoroughly before installation to ensure proper setup and optimal performance of your cooling system.

Bezpečnostní opatření

Dodržujte následující bezpečnostní pokyny, abyste předešli poškození produktu nebo zranění:

• Před instalací nebo údržbou se ujistěte, že je počítač vypnutý a odpojený ze zásuvky.
• Handle components with care to avoid electrostatic discharge. Consider using an anti-static wrist strap.
• Do not open the liquid cooler's sealed components. Tampering with the unit may void the warranty and cause leaks.
• Uchovávejte výrobek mimo dosah tekutin a extrémních teplot.
• If any part is damaged, do not attempt to install or operate the cooler. Contact customer support.

Obsah balení

Ověřte, zda jsou v balení přítomny všechny komponenty:

• AZZA Cube 360 AIO Liquid Cooler (Radiator, Pump, Tubing, and Fans pre-attached)
• Intel Mounting Bracket Kit (LGA 115X / 1366 / 1200 / 1700 / 1851)
• AMD Mounting Bracket Kit (AM5 / AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2+ / FM2 / FM1)
• Backplate for Intel Sockets
• Montážní šrouby a distanční sloupky
• Teplovodní pasta (předem nanesená nebo v tubě)
• Uživatelská příručka (tento dokument)

Technické specifikace

Průvodce instalací

Než začnete

• Gather necessary tools: Phillips head screwdriver, thermal paste cleaner (if reapplying).
• Ujistěte se, že vaše počítačová skříň má dostatek místa pro 360mm radiátor.
• Pro výběr správného montážního hardwaru určete typ patice procesoru (Intel nebo AMD).

Komponenta Overview

The AZZA Cube 360 AIO Liquid Cooler consists of a radiator with three fans, a pump integrated into the waterblock, and connecting tubes. The waterblock features an 85mm tall design for efficient heat transfer.

Obrázek: Overview of the AZZA Cube 360 AIO Liquid Cooler, showing the 360mm radiator with three RGB fans and the distinct cube-shaped waterblock.

Instalace krok za krokem

1. Připravte základní desku:
   • For Intel sockets, install the appropriate backplate behind the motherboard.
   • Install the correct standoffs onto the motherboard for your CPU socket type.
   • If thermal paste is pre-applied to the cold plate, ensure it is clean and intact. If not, apply a small amount of high-quality thermal paste to the center of your CPU's integrated heat spreader (IHS).
2. Instalace chladiče a ventilátorů:

   The radiator comes with three 120mm fans pre-installed. These fans feature a vortex design for efficient airflow and quiet operation, with speeds up to 2000 RPM and noise levels of 34 dB (A).

   

   Obrázek: Detailní záběr view of one of the cooler's fans, highlighting its vortex design and ARGB lighting. The image also indicates an airflow range of 16.4 - 65.2 CFM.

   • Mount the 360mm radiator to an available fan mounting location in your PC case (typically top or front). Use the provided long screws to secure the radiator and fans to the case.
   • Ensure the tubing has enough slack to reach the CPU socket without excessive tension or sharp bends.
3. Mount Waterblock/Pump:

   The waterblock features a patented design with the pump embedded in an aluminum alloy base, minimizing vibration and enhancing safety. It also incorporates patented rectangular radiator fins and flat water channels for improved heat dissipation.

   

   Image: An exploded diagram illustrating the internal components of the patented water pump, including the single-piece impeller and aluminum alloy pump base.

   

   Image: The AZZA Cube 360 AIO Liquid Cooler mounted on a motherboard, showcasing its compact waterblock and RGB lighting in an operational setup.

   • Attach the correct mounting brackets for your CPU socket to the waterblock.
   • Carefully align the waterblock over the CPU, ensuring the thermal paste makes even contact.
   • Secure the waterblock to the motherboard using the provided thumb screws or nuts, tightening them in a diagonal pattern until snug. Do not overtighten.
4. Připojit kabely:
   • Connect the pump's 3-pin power cable to a CPU_FAN or AIO_PUMP header on your motherboard. Consult your motherboard manual for the correct header.
   • Connect the fan power cables (typically 4-pin PWM) to available fan headers on your motherboard or a fan controller.
   • Connect the ARGB (Addressable RGB) cables from the fans and pump to a compatible 5V ARGB header on your motherboard or an ARGB controller. Ensure the voltage is correct (5V, not 12V) to prevent damage.

Operace

Počáteční zapnutí

After completing the installation, double-check all connections. Power on your system. The fans and pump should start operating, and the ARGB lighting should illuminate. Monitor your CPU temperatures using system monitoring software to ensure proper cooling.

Ovládání osvětlení ARGB

The AZZA Cube 360 supports ARGB lighting. If connected to a compatible motherboard header, you can control the lighting effects using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync). If using a dedicated ARGB controller, refer to its manual for lighting adjustments.

Fan and Pump Speed

The fan and pump speeds are typically controlled via the motherboard's BIOS/UEFI settings or through motherboard-specific software. You can adjust fan curves to balance cooling performance and noise levels. The pump is designed to run at a consistent speed for optimal liquid circulation.

Údržba

Regular maintenance helps ensure the longevity and performance of your AIO cooler:

• Čištění prachu: Pravidelně čistěte prach z žeber chladiče a lopatek ventilátoru pomocí stlačeného vzduchu. Během čištění se ujistěte, že se ventilátory neotáčejí, aby nedošlo k poškození.
• Vizuální kontrola: Regularly inspect the tubing and connections for any signs of leaks or damage. Check the fan cables and ARGB connections for secure fitment.
• Teplovodní pasta: While not frequently required, if you remove the waterblock from the CPU, you must clean off the old thermal paste and apply new thermal paste before reinstallation.

Odstraňování problémů

If you encounter issues with your AZZA Cube 360 AIO cooler, refer to the following table for common problems and solutions:

Záruka a podpora

AZZA products are manufactured to high standards and undergo rigorous quality control. This product is covered by a limited warranty against defects in materials and workmanship. The specific warranty period and terms may vary by region and retailer. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please visit the official AZZA website or contact your retailer. You may find additional resources, FAQs, and contact information on the AZZA support page: www.azza.com