Feit Electric 46" LED Utility Light Instruction Manual

Zavedení

This manual provides detailed instructions for the installation, operation, and maintenance of your Feit Electric 46-inch LED Utility Light. This fixture features a motion sensor, multiple operating modes, a timer, and remote control functionality, designed for use in various indoor environments such as garages, workshops, and storage areas.

Image: The Feit Electric 46-inch LED Utility Light, shown with hanging chains attached.

Bezpečnostní informace

Please read and understand all safety instructions before installing or operating this product. Failure to do so may result in electric shock, fire, or other hazards.

• Před instalací nebo údržbou se ujistěte, že je odpojeno napájení.
• Tento výrobek je určen pouze pro vnitřní použití.
• Nepokoušejte se svítidlo upravovat.
• Consult a qualified electrician if you are unsure about any part of the installation.

Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• 1 x Feit Electric 46" LED Utility Light
• 1 x Dálkové ovládání
• Mounting Hardware (chains, screws, anchors)

Image: A collection of mounting hardware including chains, screws, and anchors.

Image: The remote control, a wall mount bracket, and batteries for the utility light.

Specifikace

Image: Diagram illustrating the 46-inch length, 2-inch width, and 3.35-inch height of the light, along with icons for 55W, 5000 Lumens, 50,000 Hours, 4000K Color Temperature, Link up to 6 Fixtures, 5 Motion Detection Options, 7 Motion Timer Options, Intuitive IR Wireless Remote included, and 10 Adjustable Brightness Levels.

Nastavení a instalace

The Feit Electric LED Utility Light offers versatile installation options: hanging or flush mount. Ensure the power source is off before installation.

Závěsná instalace

1. Attach the hanging chains to the designated points on the fixture.
2. Securely fasten the other end of the chains to a sturdy ceiling structure using the provided hooks and screws.
3. Adjust the chain length to achieve the desired height.

Montáž pod omítku

1. Position the fixture against the ceiling at the desired location.
2. Mark the mounting points through the fixture's mounting holes.
3. Vyvrtejte pilotní otvory a v případě potřeby vložte do nich nástěnné hmoždinky.
4. Připevněte svítidlo ke stropu pomocí dodaných šroubů.

After mounting, plug the 5-ft. cord into a standard electrical outlet.

Image: A visual comparison showing how to perform a flush mount installation with screws and a hanging installation with chains and hooks.

Návod k obsluze

The utility light can be operated manually or via the included remote control.

Funkce dálkového ovládání

The remote control allows for comprehensive management of the light's features:

Image: A detailed diagram of the remote control, labeling buttons for ON/OFF, increasing/dekreasing light level, setting to highest brightness, resetting to default, setting lowest light level, motion timer options (30s, 1min, 3min, 5min, 10min, 15min, 30min), and motion range settings (2-5ft, 5-10ft, 10-15ft, 15-25ft, 20-25ft).

• Vypínač: Zapíná nebo vypíná jednotku.
• Úroveň jasu: Use the up/down arrows to increase or decrease light intensity.
• VYSOKÁ/NÍZKÁ: Quickly set to highest or lowest brightness. Press and hold HIGH for three seconds to reset to default settings.
• Motion Timer: Select from 30 seconds, 1 minute, 3 minutes, 5 minutes, 10 minutes, 15 minutes, or 30 minutes. The light will turn off after the pre-selected time if no motion is detected.
• Rozsah pohybu: Set the motion sensor detection distance to 2-5ft, 5-10ft, 10-15ft, 15-25ft, or 20-25ft.

Provoz pohybového senzoru

The built-in PIR motion sensor detects movement and can automatically activate the light. There are 5 convenient lighting modes:

• Vždy zapnuto: Light remains on continuously.
• Motion Sensor On/Off: Light turns on when motion is detected and off when no motion is detected for a set period.
• Motion Sensor with Timer: Light turns on with motion and stays on for the selected timer duration.
• Režim stmívání: Light operates at a reduced brightness level.
• Noční režim: Specific setting for low-light conditions.

Image: A woman walking in a kitchen, illustrating the motion detection range with options from 2-5ft to 20-25ft.

Údržba

This LED utility light is designed for long-lasting, maintenance-free operation. To ensure optimal performance:

• Čištění: Před čištěním odpojte napájení. Otřete svítidlo měkkým, suchým nebo lehce navlhčeným hadříkem.amp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
• Výměna žárovky: The integrated LEDs are designed to last up to 50,000 hours and are not user-replaceable.
• Inspekce: Periodically check the mounting hardware for tightness and ensure the power cord is free from damage.

Odstraňování problémů

If you experience issues with your utility light, refer to the following common solutions:

Záruka

This Feit Electric LED Utility Light is covered by a 5letá záruka výrobce. Please retain your proof of purchase for warranty claims. For detailed warranty information, refer to the official Feit Electric webwebu nebo kontaktujte zákaznickou podporu.

Zákaznická podpora

For 24/7 customer support and additional resources, please visit the Feit Electric help center:

feit.com/help

Image: A graphic indicating 24/7 help and directing users to feit.com/help, accompanied by a QR code.