HUANUO HNKB12B Klávesnice pod stolem Návod k použití

1. Nastavení a instalace

This section provides instructions for the proper setup and installation of your HUANUO HNKB12B Keyboard Tray. Ensure you have all components before beginning.

1.1 Obsah balení

Verify that all parts are present:

• Keyboard Tray sections
• C-Clamp montážní hardware
• Connecting plates and screws
• Návod k použití

1.2 Desk Compatibility Requirements

Before installation, confirm your desk meets the following criteria:

• Minimum Desktop Width: At least 31.3 inches (79.5 cm) to accommodate the tray and clamps.
• Tloušťka plochy: Between 0.5 inches (1.27 cm) and 1.49 inches (3.78 cm).
• Odbavení: Ensure no obstructions like desk frames, crossbars, or raised/beveled edges prevent proper clamp attachment or tray movement.

Image: Desk thickness and keyboard clearance diagram. This image illustrates the required desk thickness (0.5"-1.49") and the resulting keyboard clearance (2.05"-3.04") depending on desk thickness.

Image: Avoid mounting the C-clamps directly over a desk control panel to ensure proper function and stability.

Image: Ensure there is no crossbar or other obstruction directly beneath the desk edge where the clamps bude umístěno.

Image: The C-clamps are not compatible with desks that have raised edges.

1.3 Montážní kroky

1. Sestavte zásobník: Connect the two sections of the keyboard tray using the provided connecting plates and screws. Ensure they are securely fastened.
2. Připojte C-Clamps: Zajistěte C-clamp mounting hardware to the designated points on the assembled tray.
3. Montáž na stůl: Position the tray under your desk. Tighten the C-clamps firmly to the desk edge. The thicker non-slip pads on the clamps help prevent damage and enhance stability.

2. Návod k obsluze

The HUANUO HNKB12B Keyboard Tray is designed for ergonomic comfort and efficient workspace management.

2.1 Ergonomické použití

Slide the tray out to position your keyboard and mouse at an ergonomic height. This helps maintain a 90-degree angle at your elbows, reducing wrist and shoulder strain during long work sessions. The tray features wrist-friendly beveled edges for enhanced comfort.

Image: This image illustrates the difference in typing posture, showing how the keyboard tray promotes a more ergonomic position compared to typing directly on the desk.

2.2 Smooth Sliding Mechanism

The tray utilizes upgraded and lubricated metal glide tracks for smooth and consistent motion. To use, gently pull the tray forward. To store, push the tray back under the desk. Built-in limiters hold the tray securely in either the open or closed position, preventing accidental sliding.

Image: This diagram shows the keyboard tray's ability to retract 11 inches under the desk and extend 8.7 inches from the desk edge, illustrating its space-saving and accessible design.

2.3 Space Saving

By moving your keyboard and mouse below the desktop surface, the tray helps free up valuable desk space, contributing to a more organized and efficient work area.

Obrázek: Pohled shora dolů view of a desk with the keyboard tray retracted, demonstrating how it saves desktop space.

3. Údržba

Pravidelná údržba zajistí dlouhou životnost a optimální výkon vaší klávesnice.

• Čištění: Wipe the tray surface and clamps měkkým, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani agresivní chemikálie, protože by mohly poškodit povrchovou úpravu.
• Zkontrolujte Clamps: Periodically inspect the C-clamps to ensure they remain tightly secured to your desk. Retighten if necessary.
• Glide Tracks: The metal glide tracks are pre-lubricated. If you notice any stiffness in the sliding mechanism over time, a small amount of silicone-based lubricant can be applied to the tracks.

4. Řešení problémů

If you encounter any issues with your keyboard tray, refer to the following common solutions:

• Zásobník se neposouvá hladce:
  • Check for any obstructions in the glide tracks.
  • Ensure the tray is installed level and the C-clamps are evenly tightened.
  • Clean the tracks and apply a small amount of silicone lubricant if needed.
• Tray Feels Unstable or Wobbly:
  • Verify that both C-clamps are securely tightened to the desk.
  • Confirm your desk thickness is within the recommended range (0.5" to 1.49").
  • Ensure the built-in limiters are engaged when the tray is in the desired position.
• Desk Surface Damage:
  • Ensure the non-slip pads on the C-clamps are correctly positioned between the clamp a povrch stolu.
  • Avoid overtightening the C-clamps, which can cause indentations on softer desk materials.

5. Specifikace

6. Záruka a podpora

For warranty information, product support, or any inquiries regarding your HUANUO HNKB12B Keyboard Tray, please refer to the official HUANUO webnebo se obraťte přímo na jejich zákaznický servis. Uschovejte si doklad o koupi pro případ reklamace.