PCCOOLER C3T500 ARGB Mid Tower PC Case Instruction Manual

Zavedení

This manual provides detailed instructions for the installation, operation, and maintenance of your PCCOOLER C3T500 ARGB Mid Tower PC Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and optimal performance.

Bezpečnostní informace

• Always handle tempered glass panels with care to prevent breakage.
• Ensure all power is disconnected from components before installation or maintenance.
• Uchovávejte malé součástky a šrouby mimo dosah dětí.
• Refer to your motherboard and component manuals for specific installation requirements.
• Do not connect additional fans to the included fan hub beyond the 6 original fans, as this may cause damage. Ensure total 5V ARGB power consumption is below 12W if replacing internal fans.

Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• PCCOOLER C3T500 ARGB Mid Tower PC Case (Black)
• 6 x 120mm ARGB Case Fans (pre-installed)
• Fan Hub (pre-installed)
• Accessory Box (containing mounting screws, cable ties, and user manual)

Konec produktuview

The PCCOOLER C3T500 ARGB case features a column-free design with 3mm thick tempered glass for an unobstructed view of your internal components. The chassis is constructed from 0.7mm thick SPCC steel for durability.

Obrázek 1: Přední strana view of the PCCOOLER C3T500 ARGB PC Case with internal components and ARGB lighting.

Klíčové vlastnosti:

• Bez překážek View: 3mm clear tempered glass with innovative column-free design.
• Odolná konstrukce: 0.7mm thick SPCC steel chassis.
• Předinstalované chlazení: 6 x 120mm PWM ARGB case fans included.
• Rozsáhlá kompatibilita: Supports ATX, M-ATX, ITX motherboards, 360mm radiators, 175mm CPU cooler height, 400mm GPU length, and ATX PSUs up to 200mm.
• Snadná instalace: Snap-on quick-release side panel design for tool-less access.
• I/O porty: 1x USB 3.1 Gen 2 Type-C, 2x USB 3.0, MIC & AUDIO, LED Switch Button, Power Button.

Rozměry:

Figure 2: Case dimensions for planning your build. Length: 415mm (16.3in), Width: 295mm (11.6in), Height: 368mm (14.5in).

Nastavení a instalace

Follow these steps for assembling your PC components within the C3T500 ARGB case.

1. Accessing the Interior:

The side panels feature a snap-on quick-release design. Gently pull the tempered glass panel to detach it. No screws are required for removal or reattachment.

Figure 3: Snap-on quick-release side panel for easy, tool-less access.

2. Instalace základní desky:

The case supports ATX, M-ATX, and ITX motherboards. Install your motherboard onto the pre-installed standoffs. Ensure all mounting screws are securely fastened.

Figure 4: Motherboard compatibility zones within the case.

3. GPU and Expansion Cards:

The case accommodates GPUs up to 400mm in length and features 6 expansion slots. Remove the necessary slot covers before installing your graphics card or other expansion cards.

4. Instalace napájecího zdroje:

Install your ATX power supply (up to 200mm) in the designated rear compartment. Route power cables through the provided cutouts for clean management.

5. Instalace disku:

The case is equipped with mounts for 2 x 2.5" SSDs and 2 x 3.5" HDDs. Secure your storage drives in their respective bays.

6. Chladicí systém:

The C3T500 ARGB comes with 6 pre-installed 120mm PWM ARGB fans. It supports 280mm and 360mm CPU water cooling systems at the top and bottom, and air coolers up to 175mm in height.

Figure 5: Comprehensive cooling options for fans and radiators.

Figure 6: Details of the pre-installed 120mm PWM ARGB fans.

For advanced cooling solutions, consider the DA360 PRO ARGB Digital Liquid CPU Cooler:

7. Správa kabelů:

Utilize the cable routing channels and tie-down points behind the motherboard tray to ensure a clean and organized build, which also improves airflow.

Návod k obsluze

Ovládání ARGB osvětlení:

The pre-installed ARGB fans are connected to a fan hub. Use the dedicated LED Switch Button on the front I/O panel to cycle through various lighting modes and colors. For advanced control, connect the fan hub to your motherboard's ARGB header (if available) and use your motherboard's software.

Důležitá poznámka:

• The attached fan hub only supports the 6 original fans. Do not connect extra fans to the hub to avoid damage.
• If replacing internal fans connected to the fan hub, ensure the total wattage of the 5V ARGB power consumption is below 12W.

Údržba

Čištění:

• Regularly clean the dust filters located at the top and bottom of the case to maintain optimal airflow. These filters are magnetic and easily removable for cleaning.
• Wipe tempered glass panels with a soft, lint-free cloth and a mild glass cleaner. Avoid abrasive materials.
• Use compressed air to clean dust from internal components and fan blades.

Odstraňování problémů

Fan LEDs not working or stuck on one color:

• Ensure the fan hub is correctly connected to the power supply via SATA power.
• Verify that the fan hub's ARGB cable is properly connected to your motherboard's ARGB header (if using motherboard control).
• If using the case's LED button, ensure the fan hub is not simultaneously connected to the motherboard's ARGB header, or that the motherboard software is not overriding the case control. Some systems require holding the LED button for 3 seconds to switch between motherboard and case control.
• Zkontrolujte připojení jednotlivých ventilátorů k rozbočovači ventilátorů.
• If the fan hub is suspected to be faulty, contact PCCOOLER customer service.

Poor Airflow/High Temperatures:

• Ensure all pre-installed fans are spinning correctly.
• Vyčistěte všechny prachové filtry a vnitřní součásti.
• Verify correct fan orientation (intake/exhaust) for optimal airflow.
• Check for any obstructions to airflow within the case, such as poorly managed cables.

Specifikace

Záruka a podpora

PCCOOLER CPS PC CASE series products come with a two-year warranty. If you encounter any issues or have questions regarding your product during purchase or use, please contact the PCCOOLER customer service team. They are committed to providing support and resolving any concerns.

For customer service, please refer to the contact information provided in your product packaging or on the official PCCOOLER webmísto.